Hs 129 Hotas binding not working

[Parte]

I have a problem with the "duck", bindings for RPM propeller, automatic RPM designator and flaps are not working... I tried either throttle or stick and there is no answer, I got a Thrustmaster Warthog combo.

Also have different profiles for all planes, I haven't had any problems with the others, is just the hs 129...

Any Idea what could be?

[Parte]

Today I discovered the Feathering propeller just get ON, can't turn it OFF, and when I got landed the propeller do noting when I activate it, just noticed the engine goes low on RPM

[cardboard_killer]

19 hours ago, Parte said:

I have a problem with the "duck", bindings for RPM propeller, automatic RPM designator and flaps are not working... I tried either throttle or stick and there is no answer, I got a Thrustmaster Warthog combo.

Also have different profiles for all planes, I haven't had any problems with the others, is just the hs 129...

Any Idea what could be?

 

Make sure your profile is assigned. Then make sure your Engines control is not conflicting with your Engine 1 and Engine 2 controls.

 

Aside from that, I have no idea. I do not remember anyone ever having a single plane issue, but maybe it is specific to the hs and no one has ever stumbled upon it before? It is not a plane I have ever flown.

[Plurp]

8 hours ago, Parte said:

Today I discovered the Feathering propeller just get ON, can't turn it OFF, and when I got landed the propeller do noting when I activate it, just noticed the engine goes low on RPM

Turn prop automation back on to turn off prop feathering.

[Parte]

@Plurp I did, didn't worked too... In fact I made it back to base only with automation on

Edited March 27, 2024 by Parte

[Plurp]

9 minutes ago, Parte said:

@Plurp I did, didn't worked too... In fact I made it back to base only with automation on

If your talking about manually controlling the prop with turning off automation, this will have to been done with buttons, not axis, to mimic what the real controls were like.

[Yogiflight]

On 3/26/2024 at 4:56 PM, Parte said:

Any Idea what could be?

Maybe you have the same issue, I have with the "Duck". When I start a mission, I don't have the settings for the Hs 129, but the global setting. So I have to go to the settings first and change to Hs 129 settings to make everything work.

 

 

 

 

 

[Parte]

Ok, I found the problem and solution for RPM Propeller control:

 

You have to set them in the next options:

"Propellers: high pitch"

"Propellers: low pitch"

 

Otherwise, if you set them in the "RPM Propeller control" it won't work.

 

@Yogiflight you have to set it once in your plane Costumization/ Input Profile:

 

Edited March 27, 2024 by Parte

[cardboard_killer]

17 minutes ago, Parte said:

Ok, I found the problem and solution for RPM Propeller control:

 

You have to set them in the next options:

"Propellers: high pitch"

"Propellers: low pitch"

 

 

Yes @Plurp mentioned that above. There is a good spreadsheet here that shows each a/c's active controls.

 

However, that doesn't explain the flaps issue you mentioned.

[Parte]

Neither buttons or axis will work if you set them "RPM Propeller control", I tried that

[Yogiflight]

48 minutes ago, Parte said:

you have to set it once in your plane Costumization/ Input Profile:

I did that of course. It works for most other planes, just the Hs 129 and the Bf 110s as far as I remember. I already posted a bug report about that issue.