Raptorattacker Posted October 8, 2019 Posted October 8, 2019 1 hour ago, Danziger said: Thanks! Does anyone know which Hamilton Standard logo was used on this version's prop blades? Also, does anyone have a clear photo of what the stencils are supposed to say? Third, is there supposed to be anything stenciled on the backside of the blades? 1: Not particularly and it's of little use anyway as the props aren't practically editable 2: Personally, no. I tend to get all that information bit by bit from various sources. 3: No because, as in most propellers, the pilot needs as little 'distraction' as possible. A lot of bare aluminium or bare wooden props were painted grey or black on the backside for this very purpose. It'd be like driving a car with a huge lump of birdpoo right in your eyeline! Hop that helps some? Rap
-EAGLE-Shifter Posted October 8, 2019 Posted October 8, 2019 3 hours ago, Danziger said: Thanks! Does anyone know which Hamilton Standard logo was used on this version's prop blades? Also, does anyone have a clear photo of what the stencils are supposed to say? Third, is there supposed to be anything stenciled on the backside of the blades? 3 hours ago, Danziger said: Thanks! Does anyone know which Hamilton Standard logo was used on this version's prop blades? Also, does anyone have a clear photo of what the stencils are supposed to say? Third, is there supposed to be anything stenciled on the backside of the blades? 4 minutes ago, OREL_Shifty said: SORRY, YOUR QUESTION WAS, IF WAS USED ON THIS PROP.
Danziger Posted October 8, 2019 Posted October 8, 2019 I've extracted the extra textures for the stang because I want to upscale them from 1024. I want to add clearer stencils and weathering to the prop as well as some dirt and weathering for the tyres. 2
Raptorattacker Posted October 8, 2019 Posted October 8, 2019 2 hours ago, Danziger said: I've extracted the extra textures for the stang because I want to upscale them from 1024 Totally see where you're coming from. I'm almost obsessive about things like wheels (tyres especially!) but I also often come to the conclusion that I kinda just tell myself, "Leave it Rap, LEAVE IT!!". Let me know how you get on, I'd be real interested? Rap 1 1
SOLIDKREATE Posted October 8, 2019 Posted October 8, 2019 7 hours ago, Danziger said: Thanks! Does anyone know which Hamilton Standard logo was used on this version's prop blades? Also, does anyone have a clear photo of what the stencils are supposed to say? Third, is there supposed to be anything stenciled on the backside of the blades? 1. I believe so 2. There are plenty on the internet however there are slight variations. 3. No nothing on the back side that I have ever saw.
Danziger Posted October 8, 2019 Posted October 8, 2019 I'm not rushing it because I am not that knowledgeable about the P51 and I will have to do alphas and bumps as well so it will be a while. I've found out that the prop stencils are not consistent between planes so a lot of different combinations are feasible. There were markings on the back side for bore sighting the guns and camera but they weren't always present and not on all the blades. 1
Raptorattacker Posted October 8, 2019 Posted October 8, 2019 4 hours ago, Danziger said: There were markings on the back side for bore sighting the guns and camera but they weren't always present and not on all the blades. Well, y'learn summat new every day! Thanks for that, another one to file under 'when I need it'!!
Pierre64 Posted October 8, 2019 Posted October 8, 2019 Hi all, Some variations in size and number of lines for these markings as said by Spektre. Always low angle 23.0 high angle 63.0. stenciled in yellow. The Hamilton standard logo is often visible but not systematically. According to Fündekals, rear face of the blades could have some small markings too. More info here : http://www.fundekals.com/images/P-51_Stencil/P-51_Stencil_Inst_Final_rev09-2015.pdf So far, I didn’t find a ww2 photograph confirming this. I already upgraded the propeller stencils and markings for the screenshots of my wip "Detroit Miss" P-51 (you can find somewhere in the thread "P-51 jet killers suggestions" if interested). The propellers (and the wheels ) are not on the "main" skin.The .dds file, originally in 1024 x 1024, is located in p51d15/textures encrypted in planes7.gtp and need to be resized in 2048 x2048 to improve it and needs mods to be enabled.
SOLIDKREATE Posted October 9, 2019 Posted October 9, 2019 The paint matches exactly what I saw on the P-51D here in WA. The tops of the wing are painted and the control surfaces shinny. When you said markings on the back I thought you meant the logo. But thanks for the great find. This will aid me with my 374th FS skin pack. I have quite a few pictures with codes and nose arts that went with them as well as the pilots names who flew each one.
Raptorattacker Posted October 9, 2019 Posted October 9, 2019 14 hours ago, Pierre64 said: in 2048 x2048 to improve it and needs mods to be enabled If you take the time it DOES end up looking sweet though, dunnit?
51thPolux Posted October 9, 2019 Posted October 9, 2019 Hello,For Tank crew, is it possible to see the models in the viewer ?Thanks
Danziger Posted October 9, 2019 Posted October 9, 2019 17 hours ago, Pierre64 said: Hi all, Some variations in size and number of lines for these markings as said by Spektre. Always low angle 23.0 high angle 63.0. stenciled in yellow. The Hamilton standard logo is often visible but not systematically. According to Fündekals, rear face of the blades could have some small markings too. More info here : http://www.fundekals.com/images/P-51_Stencil/P-51_Stencil_Inst_Final_rev09-2015.pdf So far, I didn’t find a ww2 photograph confirming this. I already upgraded the propeller stencils and markings for the screenshots of my wip "Detroit Miss" P-51 (you can find somewhere in the thread "P-51 jet killers suggestions" if interested). The propellers (and the wheels ) are not on the "main" skin.The .dds file, originally in 1024 x 1024, is located in p51d15/textures encrypted in planes7.gtp and need to be resized in 2048 x2048 to improve it and needs mods to be enabled. How do you remove the layer mask from these images? The only way I can get these kinds of images workable in gimp is to delete the alpha. But then I lose all the damage decals. This is what I have so far. I still need to add separate numbers for each blade. I also did a little twerking to the alpha to make the cockpit dials look like they have glass over the faces. You can't really tell from a still image but it's there. Also, in some of the templates are included color charts for that country. Are there any good color charts for USAAF?
Raptorattacker Posted October 9, 2019 Posted October 9, 2019 13 minutes ago, Danziger said: Are there any good color charts for USAAF? HERE you go. Just about all the reference you could need... all the RGB etc. values as well. 5 2
Danziger Posted October 9, 2019 Posted October 9, 2019 2 hours ago, Raptorattacker said: HERE you go. Just about all the reference you could need... all the RGB etc. values as well. Thanks you are a lifesaver! 2 1
JGr2/J5_W0LF- Posted October 9, 2019 Posted October 9, 2019 (edited) Guys I highly recommend this book for all skinners out there doing WWII aircraft? http://akrealcolors.com/#link3 Edited October 9, 2019 by 361st_Bugsy 2
ROCKET_KNUT Posted October 10, 2019 Posted October 10, 2019 So the Tempest template is available, right? You @ICDP are a hero! @Raptorattacker feel free to amaze the community with a lot of astonishing skins, please. ? 1
ICDP Posted October 10, 2019 Posted October 10, 2019 The problem with a Tempest is you've seen one you've seen em all I did make a bare metal Tempest skin in the skins forum but it is a post war historical skin. 3
ROCKET_KNUT Posted October 10, 2019 Posted October 10, 2019 (edited) 2 hours ago, ICDP said: The problem with a Tempest is you've seen one you've seen em all I did make a bare metal Tempest skin in the skins forum but it is a post war historical skin. @ICDP Thank you so much for your effort, it is highly appriciated! As for the skins: It doesn´t matter if they look the same as long as they are pretty... ? Thank you again for the template! ? Edited October 10, 2019 by ROCKET_KNUT
Raptorattacker Posted October 11, 2019 Posted October 11, 2019 3 hours ago, ROCKET_KNUT said: a lot of astonishing skins, please. Certainly! If you've any in particular then stick 'em up in The Skinhouse and I'll get onto it!! Like ICDP said, there's nothing particularly out of the ordinary but then, like YOU say, as long as they're pretty!! @ICDP Once again mate, a thousand thanks (that said I probably HAVE thanked you a thousand times already!!) 1
=GEMINI=Hawkmoon98 Posted October 15, 2019 Posted October 15, 2019 1 hour ago, szelljr said: Will be B-25D template ? I hope yes.? interesting question 1
SOLIDKREATE Posted October 15, 2019 Posted October 15, 2019 1 hour ago, =GEMINI=Hawkmoon98 said: interesting question I truly hope so. I'd love to bring back to life some birds from the 9th AF. 1
ROCKET_KNUT Posted October 19, 2019 Posted October 19, 2019 @ICDP A big "Thank You man!" for the P-38 template! ???
Yankee_One Posted October 19, 2019 Posted October 19, 2019 3 hours ago, szelljr said: The P 38 template is 4K ?? ❓ Yes, its 4K P-38J-25 / Art by 1CGS / Prepared by ICDP / 4K resolution (Added 10/18/19)
Beebop Posted October 19, 2019 Posted October 19, 2019 (edited) Yes but getting the Early Access Edition gives you Collector Planes as they are released. If you wait for the official release and only get the 'Standard Edition' you will have to buy it separately. That is the "bonus" for getting the Early Access version and, when released, you will have the "Premium Edition" at the current EA discount. Edited October 19, 2019 by Beebop 1
TavnerElderberries Posted October 21, 2019 Posted October 21, 2019 Indeed @ICDP, thank you for the P-38 template!
-332FG-Magic_Zach Posted October 22, 2019 Posted October 22, 2019 (edited) I have a request for a fix for the P-51 template. I've tried to paint the filtered air covers, and there is an issue. The one cover (both actually, using one as an example) would be split between two different sections of mesh. One the top/main half, I can paint on it fine. But when I paint on the bottom half (on a different section of mesh in the template), the paint will lay over the holes in the cover. Can this be resolved? EDIT: I'll also add that the cooler filler text on the filler door acts similarly Edited October 22, 2019 by -322FG-Magic_Zach
Danziger Posted October 22, 2019 Posted October 22, 2019 There are little quirks in each template. Try painting the leading edge wing roots on the 190A8 ?
Pierre64 Posted October 22, 2019 Posted October 22, 2019 7 hours ago, -322FG-Magic_Zach said: I have a request for a fix for the P-51 template. I've tried to paint the filtered air covers, and there is an issue. The one cover (both actually, using one as an example) would be split between two different sections of mesh. One the top/main half, I can paint on it fine. But when I paint on the bottom half (on a different section of mesh in the template), the paint will lay over the holes in the cover. Can this be resolved? Hi, this plate can be painted as you like on the skin with slight modifications on the alpha layer. If you want you can even remove the holes, as seen on some P-51s. 1
VBF-12_Stick-95 Posted October 23, 2019 Posted October 23, 2019 Really a shame that the props aren't part of the regular template that can be weathered or have better decals applied.
Danziger Posted October 25, 2019 Posted October 25, 2019 On 10/23/2019 at 1:48 PM, VBF-12_Stick-95 said: Really a shame that the props aren't part of the regular template that can be weathered or have better decals applied. Working on it. 1
szelljr Posted October 27, 2019 Posted October 27, 2019 (edited) Hi ICDP, the uploaded Halberstadt CL.II template have almost 2Gb, i think is not the final(cleared*) version. Russian layers,five def. skin(cool!!).Please check. Thank you! . Edited October 27, 2019 by szelljr
ICDP Posted October 27, 2019 Posted October 27, 2019 (edited) Thanks for the Heads-up szelljr. I will let Jason know. When preparing templates I will merge as many layers as possible and remove masks to make skinning easier. This gives maximum compatibility while leaving artistic freedom up to the skinner. Plus it's easier to work with 500Mb files than 2-3Gb files. Clearly the wrong template made it up there but it contains no secrets Edited October 27, 2019 by ICDP
SOLIDKREATE Posted October 27, 2019 Posted October 27, 2019 (edited) 2-3GB those are rookie numbers. You gotta pump those numbers up ? Edited October 27, 2019 by 361st_SPEKTRE76 1
VBF-12_Pequod Posted November 30, 2019 Posted November 30, 2019 Are you going to release a B-25 template? I know it's only AI but I'd love to make some USAAF skins for that beauty.
---Yonker1 Posted December 4, 2019 Posted December 4, 2019 Hello everybody Can someone explain to me how I can view the skins in the folder. and how do I load them in to see them then in play? thanks
Recommended Posts