Jump to content

Recommended Posts

Militery_Dowg
Posted
On 4/13/2025 at 9:14 PM, jokerBR said:

Depending on your network mask, it can mean thousands of addresses to be scanned before it find yours. For example, if your netmask is 255.255.255.0 then it is "just" 254 addresses to scan, but if it is 255.255.0.0, we are talking 65,536 hosts. 255.0.0.0 = 16,777,214 hosts. Best to put it manually, if possible.

And how can I do that? (kind of a computer noob myself)

Blorg
Posted (edited)

@Player_28404

How to get your local ip address to give to IL-2Dials

Step 1
Press Windows key and type cmd.exe- you should see something like Image 1
image.thumb.png.53d9bda545b3153fad89088239995a13.png

Step 2: type ipconfig /all
image.png?ex=68145a11&is=68130891&hm=ed0da51d97387e98e990ffadd202c0624247ec70af0c7e68014f179040bbc7e3&=

The line "IPv4 Address" is the number we need, so 192.168.1.28 in my case

Step 3

Go to the dials app and click the bottom menu button, then the wifi button, then type that number in to the ip section and press enter
image.thumb.png.c91af5afd49aeb9c6c7d061c29fccf76.png

Step 4

Open the il2 dials server app (if you haven't already and hopefully the led in the bottom corner has gone green
image.thumb.png.fb40c68d321044c322918e97ac61646c.png

It seems complicated but all it is finding a number and giving it to the app, hopefully it works! Let us know if you still can't get it. We've managed to get 99% of people up and running.

Edited by Blorg
Militery_Dowg
Posted
On 5/1/2025 at 5:38 AM, Blorg said:

@Player_28404

How to get your local ip address to give to IL-2Dials

Step 1
Press Windows key and type cmd.exe- you should see something like Image 1
image.thumb.png.53d9bda545b3153fad89088239995a13.png

Step 2: type ipconfig /all
image.png?ex=68145a11&is=68130891&hm=ed0da51d97387e98e990ffadd202c0624247ec70af0c7e68014f179040bbc7e3&=

The line "IPv4 Address" is the number we need, so 192.168.1.28 in my case

Step 3

Go to the dials app and click the bottom menu button, then the wifi button, then type that number in to the ip section and press enter
image.thumb.png.c91af5afd49aeb9c6c7d061c29fccf76.png

Step 4

Open the il2 dials server app (if you haven't already and hopefully the led in the bottom corner has gone green
image.thumb.png.fb40c68d321044c322918e97ac61646c.png

It seems complicated but all it is finding a number and giving it to the app, hopefully it works! Let us know if you still can't get it. We've managed to get 99% of people up and running.

It worked. Thank you

  • Like 1
  • 3 weeks later...
  • 2 weeks later...
Posted (edited)

Version 0.67

Changes
 
Fixed Spitfire Mk.IXc layout not loading
Added La-5 F ser.38 


Unfortunately Google removed my account because I never updated the app and they've also taken my developer account away from me which I paid for, so I won't be putting the app on Google Play anymore :)

 

Edited by Blorg
  • Thanks 4
Posted
On 5/29/2025 at 9:59 PM, Blorg said:

Google removed my account

And where can I download the update now?
Best regards.

Posted

Good day. This is what I saw on the screen when I took the P-38
The settings don't help, the instrument display doesn't change.
What could it be?
Thanks in advance.

1749106146092.jpg

Posted

@Sayan

I am just uploading a new android version, it seemed to be a bad build. I could replicate the issue on my phone, and now with the new build, I can load all the American planes. Thank you for bringing it to my attention and I apologise for the problems

 

  • Thanks 1
Posted
On 6/12/2025 at 9:46 PM, Blorg said:

That's it uploaded

Oh, thank you very much! Your app is great!

  • 2 months later...
150_GIAP-Red_Dragon
Posted (edited)

Guys, just in case if someone is going to buy  S&L for a gift in the community, please give it to this wonderful project too..

Edited by 150_GIAP-Red_Dragon
Posted

I'm using version 0.67, and for some reason, the cylinder temperature indicator stopped working on all air-cooled aircraft. This issue may have occurred after purchasing treckir5. Reinstalling the software did not resolve the problem. Please assist.

150_GIAP-Red_Dragon
Posted

I think its not the case. I guess its after IL 2 update

Posted (edited)
42 minutes ago, 150_GIAP-Red_Dragon said:

Я думаю, что это не так. Полагаю, это произошло после обновления IL 2

Do all users have this problem?

Edited by Tenzo
150_GIAP-Red_Dragon
Posted
1 час назад, Tenzo сказал:

Do all users have this problem?

At least two ) you and me. 

Posted

If there was an update it will be that, I'll try and have a look this week.

Posted (edited)

Server version 0.67b
 

Fixes - Cylinder head temps have now been brought to the the latest "robust" system designed to handle sim updates better. They still magically worked so I never updated them before.


Only the server needs updated
 

itch.io download

Edited by Blorg
  • Thanks 2
  • 1 month later...
Posted (edited)

I received an email from Unity explaining that a security issue has been found in all built apps from 2017 onwards (IL-2 Dials is built with Unity). The email explains that all affected apps built with Unity will be added to Windows Defender and the app will blocked, so if anyone is having problems with launching Dials, let me know and I will rebuild Dials with the new patched editor from Unity.

Unity state that this security issue was found from their own researcher and there's no evidence that any security breach has happened, but they take it seriously enough to email every Unity dev about it. I'll keep my eye on this and update Dials when I find out more  🫡 

Edited by Blorg
  • Like 1
  • Thanks 3
Posted (edited)

I'm just installing your app for the first time, and have got it running on my Android phone, and launched the Windows server, but they don't seem to be connecting...the server says "Reading Data" and the phone says "Waiting for Mission Start".  Not sure if my setup is incorrect or what, I don't see any way to enter things like IP addresses in the server or the client?  I'm on version 0.67B of both.

 

[EDIT] It just started working...trying to figure out the cockpit readings now...

Edited by Gromyak

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...