Jump to content

T34/76 UTZ43 skin request

Luger1969

By Luger1969
in Skins and Templates

 Share

Recommended Posts

Luger1969

Luger1969

Posted
Posted

Love the camos. I know it is not essy. Would be appreciated.

T-34: The Red Army's Legendary Medium Tank- from the book

 

Generally, T-34s were finished in factory dark green, subsequently adorned by the crews with unit markings and propaganda slogans. As the war on the Eastern Front progressed during the summer months a few attempts were made to camouflage the T-34s with three-tone or two-tone schemes. These comprised dark green, brown and sand or just dark green and sand.

 

https://books.google.co.za/books?id=8i1wBwAAQBAJ&pg=PT122&lpg=PT122&dq=A+T-34/76B+depicted+in+a+threetone+camouflage+scheme,+which+was+either+sprayed+or+brushed+on.&source=bl&ots=6AivZtMhu2&sig=ACfU3U3Gkk9MgRNBkzAEqImVOnLAiDFPGw&hl=en&sa=X&ved=2ahUKEwjxo5bM5LHrAhWkqHEKHYq0DC0Q6AEwAHoECAkQAQ#v=onepage&q=A T-34%2F76B depicted in a threetone camouflage scheme%2C which was either sprayed or brushed on.&f=false

 

  • Like 1
  • 1 month later...
SR603-Flowbee

SR603-Flowbee

Posted
Posted

Hi - I just wanted to check what you had in mind. It took 5 hours to get this far just to give a rough idea where I am heading. I tried doing clean but got bored real quick. There is a lot needs doing to get the pattern and then line it up so if you wanted the book version then I might not be the right person. My game is so screwed I have to take a 3D screenshot and then convert it to 2d else I get a black screen just for having a 3D driver on my system. This is why I stopped doing skins.

 

1863279728_tricolor-4.jpg.b0f60c8d8ccb293d3fe5d60e8f2776a0.jpg

  • Like 5
  • Thanks 1
  • Upvote 1
LachenKrieg

LachenKrieg

Posted
Posted

It would be great to see at least some of your work included as part of the official release.

  • Thanks 1
Luger1969

Luger1969

Posted
  • Author
Posted

Hi Flow. Very nice and would love it.? This style ?is your trademark. Really appreciated.

  • Thanks 1
  • Upvote 1
SR603-Flowbee

SR603-Flowbee

Posted
Posted

Glad you're on-board as now that I've started I would like to carry on and make a decent job of it. The fun for me is watching it evolve as I'm never sure what will come out of it which keeps things interesting.?

messsucher

messsucher

Posted
Posted

It looks very nice but it also looks like it would had been sitting somewhere abandoned under elements. Does not look like combat prepped.

SR603-Flowbee

SR603-Flowbee

Posted
Posted

" I'm detecting negative vibes, Moriarty. Get the hose ready..." :cool:

  • Haha 1
Luger1969

Luger1969

Posted
  • Author
Posted

Donald Sutherland.?

messsucher

messsucher

Posted
Posted

Very nice, 1C should be grateful they have here such skinners.

  • Thanks 1
  • Upvote 1
Luger1969

Luger1969

Posted
  • Author
Posted

Many thanks Flow. What a beast. Very very nice. Thanks for the hours and your personal touch.

2020_10_5__4_43_36.jpg

  • Thanks 1
  • Upvote 3
SR603-Flowbee

SR603-Flowbee

Posted
Posted

I'm just really glad you like it. ?

 

Unfortunately the template file got corrupted so I had to cut things short or else retrace my steps quite a way. I will bear in mind your initial request though next time I do the T34 and bring it more inline.

  • Like 1
  • Upvote 1
  • 2 weeks later...
Yankee_One

Yankee_One

Posted
Posted

I love your work and your skins!! These are top notch!

  • Thanks 1
  • Upvote 1
SR603-Flowbee

SR603-Flowbee

Posted
Posted (edited)

Just to be clear, the two above are skins I downloaded and then ran through my template so not entirely my work. Saying that virtually everybody uses the game supplied templates and then slides their own stuff in and over so not really a big deal but I won't submit them all the same. I find that I do this to almost all the skins that I use that I haven't made from the template up. Everybody likes different stuff - clean, dirty, shiny, matt etc. My favourite is dirty with metal shining through wear in matt paint. Wet surfaces are tricky as they really need the bump map to be modified to look right. Doing this is so much easier than building plastic models with the wife constantly moaning about tidying up and cleaning up the mess. :joy: ?:nea: 

Edited by SR603-Flowbee
  • Like 2
LachenKrieg

LachenKrieg

Posted
Posted
On 10/15/2020 at 9:43 AM, SR603-Flowbee said:

Just to be clear, the two above are skins I downloaded and then ran through my template so not entirely my work. Saying that virtually everybody uses the game supplied templates and then slides their own stuff in and over so not really a big deal but I won't submit them all the same. I find that I do this to almost all the skins that I use that I haven't made from the template up. Everybody likes different stuff - clean, dirty, shiny, matt etc. My favourite is dirty with metal shining through wear in matt paint. Wet surfaces are tricky as they really need the bump map to be modified to look right. Doing this is so much easier than building plastic models with the wife constantly moaning about tidying up and cleaning up the mess. :joy: ?:nea: 

Your work is really off the charts amazing though. Thanks for helping make a great SIM even better.

  • Thanks 1
  • Upvote 1
Badniouze

Badniouze

Posted
Posted (edited)

Really great work , but for me I waiting for T34 STZ like this. I like the turret profile better...===       

 

 

t34stz.jpg

Edited by Badniouze
  • Like 2
  • Upvote 3
Adler23FalkeAuge

Adler23FalkeAuge

Posted
Posted

Yeah, what SMARTAZZ says! Thanks!!!

  • Thanks 1
Luger1969

Luger1969

Posted
  • Author
Posted (edited)

@SR603-Flowbee

 

I did not want to clogg the skins for game thread but bloody hell old chap 123 in the camos is good (both). More positive waves coming your way. You do do clean(ER) and VERY well!  (Although it is against your basic instinct/MO as a modeler using trademark quality weathering.)? 

 

Undoubtedly the Tigers and Panthers rule in the dressing up dept. 

Edited by Luger1969
  • Thanks 1
SR603-Flowbee

SR603-Flowbee

Posted
Posted (edited)

Thanks for the encouragement. :good:

 

I normally do stuff for my enjoyment so I spend lots of time just getting some tiny unnoticeable (without 3Dvision) detail to look just right. In this case I figured everything was under some kind of deadline so hence the cleaner look and a lot of recycling if you know what I mean. Hopefully get something new done soon as I still haven't managed to do what I actually want which is that weathered model look. It is really hard trying to do a solid 3D object like mud on a (very flat) 2D surface without making use of the bump map. I think Tomi did a great job by using embossing (without a bump map) but it is a very light direction fixed kind of thing. It might be the way forward though as I did try it on the HJ Panther with some success a while ago. I guess doing an Elephant would be a good place to start. The developers are now including a colour overlay to help find bits which is incredibly helpful.

 

BTW what's the weather like in SA? Let me guess - blue skies and sunshine! :bye:

Edited by SR603-Flowbee
Luger1969

Luger1969

Posted
  • Author
Posted (edited)

In one word....boiling...the swimming pool which is not put up yet is gonna be really handy when I get my act together. Blue...blue...sunshine

Edited by Luger1969

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...