Start the sim and you can not see the menu on the right.

[1/JSpan_Wind75]

I have done a new installation of the il-2 in another pc in my house and when I start the sim you see the plane il-2 turning in the hangar but there is not the menu on the right to select anything. What could be the problem?

The installation was done on Steam and it was selected to combine the accounts. I have also started with my data from the other PC and the menu is not visible. I have done a new installation of the game again and it still does not work. But in the old PC if it is seen, being in the same account of Steam and in the Il-2 with the same mail and the same password.

Thanks in advance.

[TG-55Panthercules]

Something similar used to happen in RoF a lot, when somehow the screen resolution settings got changed so that they were bigger than your monitor (which meant that the things you can't see are there, but they're just being displayed outside of your visible screen area).  In RoF, you used to be able to open up your startup.cfg file and manually change your screen resolution back to match your monitor's native resolution and then it would work when you started the game.  Not sure if BoX has a similar file/fix.

 

[EDIT] Forgot I had a test copy of BoX on this PC - just checked and it looks like you should open up startup.cfg (in the main BoX data folder, at least in the non-Steam version - not sure about the Steam version) in a text editor (e.g., notepad) and check for the resolution settings in the following section:

 

[KEY = graphics]
      3dhud = 0
      adapter = 0
      bloom_enable = 0
      desktop_center = 1
      detail_rt_res = 1024
      draw_distance = 0.54500
      fps_counter = 1
      fps_limit = 0
      full_height = 768
      full_width = 1280
      fullscreen = 0
      gamma = 1.00000
      grass_distance = 100.00000
      hdr_enable = 0
      land_anisotropy = 1
      land_tex_lods = 3
      max_cache_res = 1
      max_clouds_quality = 2
      mgpu_compatible = 0
      mirrors = 2
      multisampling = 2
      or_enable = 0
      or_height = 1600
      or_hud_rad = 1.50000
      or_hud_size = 0.75000
      or_ipd = 0.06897
      or_width = 1344
      post_sharpen = 1
      preset = 3
      rescale_target = 1.00000
      shadows_quality = 3
      ssao_enable = 0
      vsync = 0
      win_height = 1080
      win_width = 1920
[END]

Edited July 7, 2019 by TG-55Panthercules

[1/JSpan_Wind75]

On 7/7/2019 at 20:05, TG-55Panthercules said:

Algo similar solía ocurrir en RoF mucho, cuando de alguna manera la configuración de la resolución de la pantalla cambió para que fueran más grandes que su monitor (lo que significa que las cosas que no puede ver están allí, pero solo se muestran fuera de su área de pantalla visible). En RoF, solía poder abrir su archivo startup.cfg y cambiar manualmente la resolución de su pantalla para que coincida con la resolución nativa de su monitor y luego funcionaría cuando comenzara el juego. No estoy seguro si BoX tiene un archivo / arreglo similar.

 

[EDITAR] Olvidé que tenía una copia de prueba de BoX en esta PC, solo verifiqué y parece que debería abrir startup.cfg (en la carpeta principal de datos de BoX, al menos en la versión que no es Steam, no estoy seguro sobre Steam versión) en un editor de texto (p. ej., bloc de notas) y verifique la configuración de resolución en la siguiente sección:

 

[KEY = graphics]
      3dhud = 0
      adapter = 0
      bloom_enable = 0
      desktop_center = 1
      detail_rt_res = 1024
      draw_distance = 0.54500
      fps_counter = 1
      fps_limit = 0
      full_height = 768
      full_width = 1280
      fullscreen = 0
      gamma = 1.00000
      grass_distance = 100.00000
      hdr_enablero 0
      land_anistance = 0 land_anistance = 0 land_anistance = 0
      land_tex_lods = 3
      max_cache_res = 1
      max_clouds_quality = 2
      mgpu_compatible = 0
      espejos = 2
      multimuestreo = 2
      or_enable = 0
      or_height = 1600
      or_hud_rad = 1.50000
      or_hud_size = 0.75000
      or_ipd = 0.06897
      or_width = 1344
      post_sharpen = 1
      preset = 3
      rescale_target = 1.00000
      shadows_quality = 3
      ssao_enable = 0
      vsync = 0
      win_height = 1080
      win_width = 1920
[END]

 

Thank you Panthercules.

 

I already managed to fix it was a very simple thing: You had to click to see FULL SCREEN. Is that the new PC has a 2K monitor different resolution and format and is that it was not visually showing the entire screen.

 

Thank you very much for the comment. Sorry for the delay in answering you but I have been sick.

[TG-55Panthercules]

Glad you got it sorted, and hope you are feeling better.