Mirror problem

[Jabo_68*]

The latest update seems to have messed up the mirror graphics.

 

Intel Core i5 7500 3.4 Ghz, Win 10 64

8GB RAM

Radeon RX580 8GB

600W PSU

1080p monitor

TrackIR 5

Edited December 11, 2018 by Jabo_68*
added hardware, os

[Elem]

Yes, I've noticed this in the P-39. From the correct position to see the gun sight, the mirror just shows the rear canopy frame!

[6FG_Big_Al]

Good evening,

I noticed personally that the mirrors have problems with the representation of water. Especially if you have a sea in your back it becomes very noticeable.
I don't know if there is already a thread for it, but I only noticed it since the update.
I will add some pictures later.

Edited December 8, 2018 by [KGv53]Big_Al_the_Allo
I have added a few pictures to clarify

[Jabo_68*]

Yes that's the problem I was referring to.  

[6FG_Big_Al]

Well, then I'm not the only one^^
I tested it with several airplanes and played around with my graphics settings, but the result was the same.

Hopefully it will be fixed soon.

Edited December 8, 2018 by [KGv53]Big_Al_the_Allo

[Jabo_68*]

In addition to the above mentioned problems the mirrors, at whatever setting, cause significant fps drop when flying low over forests.  Please fix  it.

On 12/6/2018 at 9:57 AM, Elem said:

Yes, I've noticed this in the P-39. From the correct position to see the gun sight, the mirror just shows the rear canopy frame!

The same problem with the Spitfire IX.

[=OKT=Muas]

On ‎12‎/‎8‎/‎2018 at 4:41 PM, [KGv53]Big_Al_the_Allo said:

Good evening,

I noticed personally that the mirrors have problems with the representation of water. Especially if you have a sea in your back it becomes very noticeable.
I don't know if there is already a thread for it, but I only noticed it since the update.
I will add some pictures later.

 

Hello all.

 

Any news on this very strange artifacts?

I opened a ticket on the official support a week ago, but didn't get any answer so far, even though they are usually very fast to answer.

It's seems some sea textures are not properly loaded when rendered in the mirror display.

 

According to my investigation, this issue occurs when an aircraft mirror is displaying an image 1) only at the Kuban map ocean area, and 2) at any mirror setting (simple, medium, complex) except when off. When off, the image is completely blurred but the issue doesn't occur.

 

The issue also doesn't occur at any other water surface like rivers and lakes in the very same Kuban map. It doesn't happen in any other map too, even in Stalingrad Volga river.

 

The problem is precisely in between the coastal area and the horizon of the ocean in the Kuban map, north and south. It's strange that water textures load correctly next to the coastline and horizon, but not in the space in between those.

 

I guess this might have to do with some wave effect modeled at see, that is not properly rendered in the mirrors.

There are 8 different sea states that can be generated in a mission, but I didn't try them out to check for any different behavior.

 

Personally, I cannot tell if this started in 3.009, as I don't use mirrors too often because I mostly fly German aircraft.

Anyway, this is something that has to be solved.

 

 

 

[6FG_Big_Al]

Good Evening @=OKT=Muas,

i posted the problem in this thread here:

One of the Team Guys marked my comment a while ago with "fixed". The Problem, as you can see, is still there. So i don´t know if this was mentioned with the current version (3.009) or for the next update. Maybe you can repost the Problem in this Thread to keep it updated.  And you are completely right, that this error should be solved, because it´s really annoying and destroying the imersion.

 

Have a great day!

 

 

[airahusky]

21 час назад, [KGv53]Big_Al_the_Allo сказал:

One of the Team Guys marked my comment a while ago with "fixed".

This means that we fixed it, but unfortunately the players will see these changes only in the next patch.

[6FG_Big_Al]

Thanks for the clarification and sounds great

[THERION]

3 hours ago, airahusky said:

This means that we fixed it, but unfortunately the players will see these changes only in the next patch.

 

Ah yes, now I remember - but when did you say will the patch come out? I forgot, sorry.

[=OKT=Muas]

On this subject, I received today the message below from technical support:

 

Re: IL2 / 932DBF8A-83C4-47B7-8A7A-2DED7CDA8510 / Game issues

1CGS Support Team 

10:55 AM (5 hours ago)

 

Dear user,

We are aware of this problem and we fixed it.
It will be released with a new update.
Follow our Forum and News to stay tuned.