EagleMountain Posted April 22, 2018 Posted April 22, 2018 Hi What am I missing with my Bf 110 G2, its gun sight isn't centered (as it is in the E2) and looks like this?
LuftManu Posted April 22, 2018 Posted April 22, 2018 Hello, your view has been modified. Use your head (if you have trackir) to center the gunsight and press F10. If you don't have Trakcir use the Insert,Supr and those keys to move the head of the pilot and press the same key
danielprates Posted April 23, 2018 Posted April 23, 2018 Isn't there a "center view" key? Fiddle around in the key binding setup and you will find it. It centers your view on the crosshairs.
ShamrockOneFive Posted April 23, 2018 Posted April 23, 2018 1 hour ago, danielprates said: Isn't there a "center view" key? Fiddle around in the key binding setup and you will find it. It centers your view on the crosshairs. Which centers it to the saved position. If the OP has accidentally changed that, which it sounds like he did, he'll need to reset it
EagleMountain Posted April 23, 2018 Author Posted April 23, 2018 (edited) 10 hours ago, LF_ManuV said: Hello, your view has been modified. Use your head (if you have trackir) to center the gunsight and press F10. If you don't have Trakcir use the Insert,Supr and those keys to move the head of the pilot and press the same key Ahhh I see. Must have done it in error then. Is it possible to change something in an ini/cfg file or the like? I really want it to go back to standard. Thanks for taking the time to answer Edited April 23, 2018 by EagleMountain
Trooper117 Posted April 23, 2018 Posted April 23, 2018 If you are using trackir press F9 to disable it, then using your page up, page down, insert, delete, home and end keys, alter your view until it's where you want it... Once that is done press F10 to save the view... Then press F9 again to activate your trackir . Simple stuff!
EagleMountain Posted April 23, 2018 Author Posted April 23, 2018 31 minutes ago, Trooper117 said: If you are using trackir press F9 to disable it, then using your page up, page down, insert, delete, home and end keys, alter your view until it's where you want it... Once that is done press F10 to save the view... Then press F9 again to activate your trackir . Simple stuff! Ok thanks, will try that
EagleMountain Posted April 23, 2018 Author Posted April 23, 2018 I found this old thread and will try if it still works
EagleMountain Posted April 23, 2018 Author Posted April 23, 2018 Ok well, it seems that its indeed the default that has been changed. I followed the above from LF_ManuV and it worked. 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now