Mapping in Trackhat

[Rambos_Nachbar]

Hey fellow Aces,

 

I'm asking people who use Trackhat and therefor Opentrack as well. What mapping do you use? Like how many degrees for a 180° turn, deadzones, slow starting curves, stuff like this.

 

I'm tuning mine at the moment and want to get the smoothest movement as possible.

 

Thank you

 

 

[sniperton]

May vary depending on distance and offset. Mine is at 130 cm apart and some 40 cm higher. No guarantee that my settings make any sense for you.

 

Accela:

Smoothing: 30 ms 

Rotation filtering: 1.8°

Position filtering: 0.5 mm

 

Yaw: 24 at 180, starting curve ends at 7x22.5

Pitch: 30 at 180, curve end at 8x2.5 (upper), 22 at 140, curve ends 5x17.5 (lower)

Roll: 180 at 160, fully linear without curve

X: 11 at 48, curve ends at 2x6

Y: 9.5 at 43, curve ends at 1x2 (upper), 5.5 at 75, curve ends at 1x5

Z: 8.5 at 75, curve ends at 0.5x0

 

I suggest play with Yaw and Pitch first, switching off Roll, X, Y, and Z tracking completely (flat curve). Once you're sort of happy with the result, you can add these ones one by one. 

 

 

Accela:

Smoothing: 30 ms 

Rotation filtering: 1.8°

Position filtering: 0.5 mm

[No_85_Gramps]

Here is a small pdf file showing my mappings, and accela, settings for OT. I was trying to avoid posting seven separate images, so I combined them in the pdf. 

test2pdf.pdf

Edited September 12, 2017 by Gramps

[Rambos_Nachbar]

Thank you very much guys. I will look into it the next days.