Jump to content

Recommended Posts

Posted
1 minute ago, Zeev said:

Can it be Nvidia drivers?

Might be worth checking that the update hasn't reset your .config file settings?

FodderMonkey
Posted

I'm having graphics issues after update 4.601.  I'm running a NVIDIA GeForce GTX 950A, and everything was fine (for an older, slower machine) before the update, but afterward my visibility (render distance?) has dropped to almost nothing.  Aircraft over 200m away are ghosts, and the ground has no texture.  Visibility is pretty much zero.

 

001.thumb.png.e324730f6b5f20ca05a7d21c501a004a.png

 

002.png

Posted

Issue:  Antialaising artifacts in BF109 cockpits with v4.6

Description:  With the sun from the rear, the join between the Perspex and the canopy frame is producing a very pronounced and distracting jagged artifact (see below pics).

Setting:  Ultra, MSAA 4X, RTX 2070 super.

 

2021_4_24__10_42_58.thumb.jpg.6dc085ce0fc2c183fa534c6e37975884.jpg

 

2021_4_24__10_43_9.thumb.jpg.e6bf22bc9ef1d32c058bc809c0fa62bb.jpg

FodderMonkey
Posted
On 4/24/2021 at 5:12 AM, FodderMonkey said:

I'm having graphics issues after update 4.601.  I'm running a NVIDIA GeForce GTX 950A, and everything was fine (for an older, slower machine) before the update, but afterward my visibility (render distance?) has dropped to almost nothing.  Aircraft over 200m away are ghosts, and the ground has no texture.  Visibility is pretty much zero.

Specs, if it helps:

Console: Lenovo Ideacentre AIO 700 (All-in-one)

Processor: Intel Core i5-6400 2.7GHz

Windows 10 Home

Graphics: NVIDIA GeForce GTX 950A, Driver version 27.21.14.6611 (4/12/2021)

 

It looks like textures are missing for anything not immediately next to the player's POV.  Regardless of where the camera is moved, only objects immediately near the player have textures.  While flying, textures will appear once objects are close enough, then disappear a specific distance away from the pov.  Anything beyond this distance is a see-through ghost in a field of opaque white.  Pics in original post.  Have tried changing settings, render distance, etc. both in-game and in the video card software; nothing has an effect.

 

Thanks in advance for any help anyone is able to offer!

 

  • Thanks 1
  • 1CGS
-DED-Rapidus
Posted
On 4/27/2021 at 5:09 AM, FodderMonkey said:

It looks like textures are missing for anything not immediately next to the player's POV.  Regardless of where the camera is moved, only objects immediately near the player have textures.  While flying, textures will appear once objects are close enough, then disappear a specific distance away from the pov.  Anything beyond this distance is a see-through ghost in a field of opaque white.  Pics in original post.  Have tried changing settings, render distance, etc. both in-game and in the video card software; nothing has an effect.

 

Thanks in advance for any help anyone is able to offer!

How much video memory does your graphics card have?

FodderMonkey
Posted
9 hours ago, -DED-Rapidus said:

How much video memory does your graphics card have?

*Thank you* for responding!  I've been pulling my hair out on this one!

 

Here's a screen grab of the specs the system is reporting:

mem01.png.70c80ef39aba39ebdc225b1720fc4489.pngmem02.png.eb84a5d4d17301a1bd5e502bcb1a3db3.png

Posted

Just a quick note: There have been a number of updates to my system this last week - Windows, IL-2, and Nvidia's latest driver. Yesterday morning I could not get better than 55 FPS on my PC in IL-2 where I usually experience 143-144 FPS on my 1440 monitor (PC specs below). After repeatedly restarting and fooling around, some web searches, etc. I finally rolled back the latest Nvidia driver and that fixed the issue immediately. I suspected the latest Windows update as there has been a lot mention on the web of FPS drops, but got no relief using the suggestions I found and reinstalled those updates with no issues. Just noting for Nvidia users.

 

PC: AMD Ryzen 5800x on Asus B550-F mobo

       32GB DDR 3200Mhz Patriot Viper Steel

       3 NVMe SSDs on mobo (Seagate, Samsung, and Sabrent- one is in a PCIe 3 slot)

       EVGA RTX 3080 XC3 Ultra (undervolted)

       Asus 27" 1440p monitor

       Sunflower Leadex III 850W PSU

Pretty powerful and stable setup for Ultra graphics settings in BoX so I knew it had to be something in one of the updates. Running fine now.

jollyjack
Posted (edited)
On 4/23/2021 at 9:17 AM, jollyjack said:

Windows LTSC, NVIDIA 2080ti, latest driver. i7 9700K, 64GB RAM.

 

I have occasional stuttering events; IL2 runs fine, and then after a few minutes really slow, only for a while,

and then all of a sudden it's normal again.

Only with a few missions, and i think it's with Rheinland map home made mission stuff only.

 

Other programs running at the same time work fine, and opening taskmanager while stuttering it looks like the i7s core 4 is far too busy.

Can this be due a windows setting?

 

It was with 4.506, and now in 4.601 it seems worse.

 

Also i begin to think it's mission programming related, starts f.i. suddenly during a dog fight over Antwerp. But i experienced it with another Rheinland mission too.

Attached mission is home made, and adapted partly with imported groups, as target practice stuff.

 

Thanks for looking .... PS i will post here if i find out more.

 

ADDED 1: https://www.nvidia.com/en-us/geforce/forums/geforce-graphics-cards/5/283079/major-stuttering-with-all-games-rtx-2080/

 

ADDED2: Been running a pretty intensive mission on the Kuban map, with no stutter problems  ..

 

Stutters CPU core 4.jpg

 

 

BUMP:

Sofar i tried different drivers, 411.63 won't install any more (LTSC relaied, sinc update i think).

Advice on a NVDIA forum was use 451,85. Stiil the same, tried different settings

 

It is still only with the Rheinland map it seems. The mission posted above; after about 2minutes the game slows down, and stays that way.

No MODS, fresh install same thing, deinstalled Geoforce Experience (again) also.

Disabled the NVDIA Audio drivers as i have a small Stenberg USB interface.

With the last hangup the overload was with core 3 instead of 4.

 

PS been using the Kuban map quit a bit, and have no problems with that.

Can it be that there are texture issues with Rheinland spring or summer?

 

I also begin to think it might be related to the mission above and some Rheinland stuff, i'll test some other Rheinland IL2's QMB missions.

 

ADDED 3; 03-may 2021: i reworked the whole mission, grouped a lot, checked integrity stuff, i don't know what fixed it, but the cause was this mission.

Uploaded a seemingly OK one instead, version 2h.

Though i had the (at least for a while) stutter thing also with a totally different Rheinland mission.

OR because of the DIFFERENT 451,85 NVDIA drivers as was recommended on another game forum about stutters with 20 series cards ???

 

ADDED 4: working with another Rheinland mission:

 

 

 

 

 

Spit-MkiXe Flanders Shootout JJ v2h.zip

Edited by jollyjack
GiN_nTonic
Posted

When playing any of the IL2 titles I have in my 3090 rig I keep getting crashes due to "dx render" issues.  Does anyone know what thats about?  Its nearly constant.

IckyATLAS
Posted (edited)

It seems that there is a Windows 10 issue with some of the latest KB updates updates that impacts FPS with Nvidia/AMD cards. Same with the Windows latest build 21H1.

It can create important loss of frame rate, stuttering and various graphic issues.

Nvidia has released a statement saying that it is better to come back to an earlier version. It impacts also some AMD cards.

It is not clear what type of hardware configuration is impacted.

It has a larger impact than only for gamers. Its not clear when these issues will be resolved.

 

 

Edited by IckyATLAS
RedKestrel
Posted
15 hours ago, GiN_nTonic said:

When playing any of the IL2 titles I have in my 3090 rig I keep getting crashes due to "dx render" issues.  Does anyone know what thats about?  Its nearly constant.

Sometimes that means that the card is overheating or near failure. Other times, it is a driver problem. Or could be a problem with your install of Il-2. So don't panic yet, but if you can see if your card is overheating during play with Afterburner or a similar app that might be useful.

 

 When it happens you should get a crash dump and submit it in the thread in this forum about "FInding the cause of a random crash...", then the devs can analyze the crash dump and see what it triggering it. There are instructions in how to do that in the first post of the thread.

JG7_X-Man
Posted
5 hours ago, RedKestrel said:

Sometimes that means that the card is overheating or near failure. Other times, it is a driver problem. Or could be a problem with your install of Il-2. So don't panic yet, but if you can see if your card is overheating during play with Afterburner or a similar app that might be useful.

 

 When it happens you should get a crash dump and submit it in the thread in this forum about "FInding the cause of a random crash...", then the devs can analyze the crash dump and see what it triggering it. There are instructions in how to do that in the first post of the thread.

I think there are 22 3090 cards on Newegg's website as of today so saying 3090 alone doesn't help as this maybe a card specific issue and not all 3090's are equal. Hope you sort it out.

  • 2 weeks later...
Horizon123
Posted

I have a very repeatable bug, where setting the Landscape Detail to anything other than "Normal", results in the terrain details blinking incessantly in and out.  It makes it impossible to track targets and also is very distracting.  

Likely ought to remove that feature or fix that from happening.  I'm using an RTX card on Windows, for reference.  Ultra detail on everything except, Normal on the Terrain details

  • 1 month later...
Posted

I've just bought this game and simply I cannot play. when i load the game in menu The lag is horrible and is almost impossible to navigate the menus.Inside the Cockpit Im experiencing very annoying lag besides black stripes.  Your help would be highly appreciated.
 
Intel i9-9900k
Memory 32GB
GPU GTX 3080
SSD

 

 

2021_7_16__17_2_38 (Small) (1).jpg

2021_7_16__17_2_48 (Small) (1).jpg

2021_7_16__17_4_4 (Small).jpg

Posted

The black frame on the right side of your screen suggest that you have some kind of overlay or recording software running in the background? What kind of software is autorunning when you start Windows? You can quickly check by entering the task manager (ctrl+alt+del or right click on taskbar) and then check on the "startup" tab.

Posted
1 hour ago, Rapax007 said:

I've just bought this game and simply I cannot play. when i load the game in menu The lag is horrible and is almost impossible to navigate the menus.Inside the Cockpit Im experiencing very annoying lag besides black stripes.  Your help would be highly appreciated.
 
Intel i9-9900k
Memory 32GB
GPU GTX 3080
SSD

 

 

2021_7_16__17_2_38 (Small) (1).jpg

2021_7_16__17_2_48 (Small) (1).jpg

2021_7_16__17_4_4 (Small).jpg

In addition to the overlay mentioned by joker above, could you post a screenshot of your graphics settings in-game? And tell us your monitor resolution, Nvidia drivers, and any third party stuff you have running at the same time. 

It almost looks like you are playing on two monitors, or the game is projecting two different images, each of half the screen...with a 3080 and a 9900K your computer should eat this game for breakfast on almost any setup.

  • Upvote 1
Posted

thank you for your interest 
I have disabled almost everything in the the task manager  As jokerBR said but I see no differences.  not even i messed with settings because I just installed, but There is no difference between Low, medium or Ultra. The black lines in the middle and bottom part of the screen are not perfect, they are like granulated.
Furthermore i play DCS in all its splendour without problems. with track ir and Nvidia driver:471.11.
(Please excuse my bad English)

2021_7_16__20_24_39 (Medium).jpg

Posted

Is it on your C drive?, or on a seperate games drive?.  If so I would delete and reinstall, turn off Firewall and antivirus, and try it again, make sure you let it install what it needs to.  I keep mine on a games drive, once I have it all set up I copy that to my Dump Truck as a know good install, so if the game messes up, I can delete it and just copy the good install over to the games drive. 

fubar_2_niner
Posted

@Rapax007

 

Couple of quick suggestions. Set your 'Target FPS' to 'Off'.

 

Try the Nvidia Control panel settings in the screenshots.

Also as Hoss said, if you haven't already get BoX off your c:\ drive if possible and out of program files.

 

I am using Geforce drivers 471.22 and getting a constant 60 FPS in 4K, and 144 FPS not in 4K at 3840x2160 res.

 

Hope this helps a little.

 

Fube

A.jpg

B.jpg

C.jpg

Posted

Thanks for your help! jokerBR,RedKestrel,352nd_Hoss and fubar_2_niner
The problem had been resolved changing cable Connection from monitor to graphics card?,  I think it was connected to the motherboard. I do not know anything about computers, but was also solved!  .I can finally enjoying this game.

  • Like 1
  • Upvote 1
=RAW=Orinoco
Posted

Good morning all,

 

I’m not sure if I am in the right place to post but I am having a consistent issue with IL-2 and streaming with OBS Studio.

I have a good PC: Intel I9, 32gb RAM, 2080ti (no overclocking) and have had no issues playing IL-2 on ultra, as well as DCS,MSF and many more new games. I twitch stream when I can (shameless plug: https://www.twitch.tv/orinocoz )


I can play IL-2 for hours when not streaming but when I do stream, I get a hard crash with the blue screen of death saying KERNAL MODE HEAP CORRUPTION. When googling this failure, I am told to reinstall drivers which I have done many a time and even tried rolling back to previous drivers. The issue only started in January this year according to events manager. I can stream DCS, MSF all on ultra with no issues and I can play IL-2 without streaming fine but the two together I crash at odd times. Sometimes just as I’ve spawned, or it’ll be 45 mins into a flight while I’m cruising or the most irritating time is after a long hour of bombing and dogfighting and just as I’m about touch down at base it crashes. I can’t see a correlation to loads on the GPU to the crash and I have kept a close eye on heat and that’s not an issue either.  

I have tried many different things but to no success. Unfortunately, it’s putting me off IL-2 and actually pushing me to DCS because its more stable…. (I know, how ironic)  

If anyone has any advice or suggestions I would greatly appreciate it.

Thanks all

Noco

 

 


 

Posted

I'm facing textures issue. Some objects are under or over the ground like in the picture attached. 

IL-2  Sturmovik  Battle of Stalingrad Screenshot 2021.07.15 - 21.25.33.51.jpg

  • Upvote 1
Posted

Hi Orinoco, heap corruption occurs when software tries to write to a location in memory outside boundaries. Yes, it can be the graphics driver, but it can also be any other software that you have running at the time - like for instance your streaming software. 
This can be driver related, or memory (hardware) related, or system related... it's one of the most difficult problems to track down and solve. 
I'm assuming you already tested your system with the "sfc /scannow" and "DISM /Online /Cleanup-Image /RestoreHealth" commands? 

Since it is only occurring when both processes (stream + IL2) are working, I would start to check the streaming software. Maybe trying with something else than OBS?

 

=RAW=Orinoco
Posted
11 hours ago, jokerBR said:

Hi Orinoco, heap corruption occurs when software tries to write to a location in memory outside boundaries. Yes, it can be the graphics driver, but it can also be any other software that you have running at the time - like for instance your streaming software. 
This can be driver related, or memory (hardware) related, or system related... it's one of the most difficult problems to track down and solve. 
I'm assuming you already tested your system with the "sfc /scannow" and "DISM /Online /Cleanup-Image /RestoreHealth" commands? 

Since it is only occurring when both processes (stream + IL2) are working, I would start to check the streaming software. Maybe trying with something else than OBS?

 


Thank you Joker for the response.

I have done the commands and each time they come back with no corruption detected which is good I guess but still no luck. I think im thrown by it because I only have this issue with IL-2, I have verified the files of il-2 to make sure nothings missing, im tempted to try a fresh install of il-2 but not sure that will solve anything. I am reluctant to change the streaming software due to the time it takes to set it all up, especially as it works for everything else. So far im left with a brick wall and my head!

Cheers

Noco

Posted (edited)

My standalone version of Il-2 BoS/BoB/FC in VR still keeps crashing seconds after starting any mission with the following error message- the image in VR and on the desktop mirror freezes even though the sound continues in real time with the attached error message- I have to CTRL-ALT-DEL to get out and quit- I've written to 1C three times for support and they haven't responded at all- very frustrating after paying so much for these games.. anyone know of any other ways of getting hold them/getting support quicker? I can't play at all since this is happening and it ran fine with the same pc and VR headset before the last time I tried a few weeks before- all other games run fine- also any idea how to do a repair? I really don't want to have to completely uninstall/reinstall again- is this related to the latest Nvida driver at all? Thanks!

 

RTX 2080 Ti (Nvdia Driver 471.41)

i7 10700K

64GB of Ram at 3600Mhz

Pimax 8KX VR headset

20210715_214124_resized.jpg

Edited by theSelf
JG1_Labroisse
Posted
12 hours ago, theSelf said:

My standalone version of Il-2 BoS/BoB/FC in VR still keeps crashing seconds after starting any mission with the following error message- the image in VR and on the desktop mirror freezes even though the sound continues in real time with the attached error message- I have to CTRL-ALT-DEL to get out and quit- I've written to 1C three times for support and they haven't responded at all- very frustrating after paying so much for these games.. anyone know of any other ways of getting hold them/getting support quicker? I can't play at all since this is happening and it ran fine with the same pc and VR headset before the last time I tried a few weeks before- all other games run fine- also any idea how to do a repair? I really don't want to have to completely uninstall/reinstall again- is this related to the latest Nvida driver at all? Thanks!

 

RTX 2080 Ti (Nvdia Driver 471.41)

i7 10700K

64GB of Ram at 3600Mhz

Pimax 8KX VR headset

 

 

 

This solution seems to have fixed this error for me:

 

https://thegeekpage.com/dxgi-error-device-removed/

 

 

 

  • Like 1
  • Thanks 2
Posted
On 7/19/2021 at 8:32 PM, etopp said:

I'm facing textures issue. Some objects are under or over the ground like in the picture attached. 

IL-2  Sturmovik  Battle of Stalingrad Screenshot 2021.07.15 - 21.25.33.51.jpg

I have the same issue. 

 

Restarting the game always resolves it, but it's a pain to have to launch a mission, then exit game and restart. Which I have to do every single time. 

 

Has persisted through several new driver releases. I'm using a 3080. 

 

Roke

  • Upvote 1
Posted

With latest nvidia drivers I have had a lot of issues, until I began to restart the driver prior gaming. I do this by using the restart64.exe program that comes with the CRU package ( the package is used to adjust some things on monitors and it is free, just google it ). This particular utility restarts the video driver without needing to reboot machine. Don't ask me why, it just works in my case. You may try it as well? 

Posted

To restart your graphics driver at any time, just press Win+Ctrl+Shift+B: the screen flickers, there's a beep, and everything is back to normal immediately.

  • Upvote 1
Posted
12 hours ago, MajorMagee said:

To restart your graphics driver at any time, just press Win+Ctrl+Shift+B: the screen flickers, there's a beep, and everything is back to normal immediately.

Nice, didn't know this. Seems to work just as fine, and without the need of the utility (although I use the restart from command line inside a batch file that loads several other things, so it is still useful). Thanks for the tip. ?

Posted

a PS, FY:, with my Aorus Gigabyte 2080ti i updated to 471.11, and NO Geoforce experience, IMO too intrusive.

Windows LTSC, and for 2 weeks all is running smoothly ...

  • 3 weeks later...
Posted (edited)

I'm having some severe performance issues with the new patch.  I've literally lost 100fps for my given settings (from about 120fps to <20fps).  It looks like my RAM usage has increased, but it still isn't using all 16GB I have available.  Everything else looks normal.

I have an Intel i5-8600K, GTX 1070, and 16GB of RAM, and I'm running on a single in 1080p, so this shouldn't be taxing my rig this hard.

 

Edit: I updated my GeForce driver to be safe, and gained a whole 1fps.  The issue definitely seems to lie with the GPU, although my RAM usage is also higher than it should be.

Edited by MadMike32
Mtnbiker1998
Posted
On 7/25/2021 at 1:58 AM, theSelf said:

My standalone version of Il-2 BoS/BoB/FC in VR still keeps crashing seconds after starting any mission with the following error message- the image in VR and on the desktop mirror freezes even though the sound continues in real time with the attached error message- I have to CTRL-ALT-DEL to get out and quit- I've written to 1C three times for support and they haven't responded at all- very frustrating after paying so much for these games.. anyone know of any other ways of getting hold them/getting support quicker? I can't play at all since this is happening and it ran fine with the same pc and VR headset before the last time I tried a few weeks before- all other games run fine- also any idea how to do a repair? I really don't want to have to completely uninstall/reinstall again- is this related to the latest Nvida driver at all? Thanks!

 

RTX 2080 Ti (Nvdia Driver 471.41)

i7 10700K

64GB of Ram at 3600Mhz

Pimax 8KX VR headset

20210715_214124_resized.jpg

Getting the same crash and the same error message.

RTX 2060 Super

i7-9700k

16gb RAM

Lenovo Explorer

  • 1CGS
-DED-Rapidus
Posted
6 hours ago, Mtnbiker1998 said:

Getting the same crash and the same error message.

RTX 2060 Super

i7-9700k

16gb RAM

Lenovo Explorer

What settings did the game work with?

Posted

About a week ago I experienced this problem and it went on for several days. At first I thought it might be due to a bad 3080Ti undervolt . I am using a Valve Index. The problem eventually disappeared for no reason I can be sure of. Things I tried for a fix included a "clean" install of Nvidia 471.68. The Nvidia download menu seems a bit more confusing now so I made sure to download the appropriate version for the 3080Ti. I also disabled all OSD's for Afterburner Riva Tuner and other monitoring software I had installed. I conpletely uninstalled Riva Tuner. I also temporarily set the bios back to default settings but don't remember that doing that had any useful effect. I did not reinstall GB or do anything to the registry nor did I make any hardware changes.

DX error Valve Index 08152021.jpg

Mtnbiker1998
Posted (edited)
12 hours ago, -DED-Rapidus said:

What settings did the game work with?

I assume you mean graphics settings so here you go! attached.

 

I should also mention its somewhat intermittent, I can go hours or even days between a game crash, but when it happens once it will keep happening every time I restart my game until I reboot my PC.

 

EDIT: Slight change, when I run in VR I have the resolution set to the lowest possible (640x480 I think?) and obviously the VR HMD checkbox is enabled

20210819132943_1.jpg

Edited by Mtnbiker1998

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...