Matthias_PDX Posted December 23, 2016 Posted December 23, 2016 100 fps in 4k on high settings holy smokes. With a single rx 480. 1
HippyDruid Posted December 23, 2016 Posted December 23, 2016 Good work on the hotfix. I hope you guys can have a look at the MSFFB2 Joystick/TrackIR FFB stuttering sometime in the near future. https://forum.il2sturmovik.com/topic/26746-trackir-and-ffb-working-together-cause-terrible-stuttering/ That would be superb!
JG17Tombala79 Posted December 23, 2016 Posted December 23, 2016 Hi all! Many thanks to the developers for all their work! Have a i7 4790 not overclocked, a Nvidia 980 and 4k Gsync. Game runs at constant 60fps (ultra settings, all maxed out), only when viewing tanks etc as close at possible it drops down to ~25. But this doesn't matter so much to me. No tearing or flickering etc.. Its really wonderful now, again many thanks for this. I read some guys have probems with Gsync and tearing in fullscreen mode, maybe try to set both fps at 60 and vsync on. Thats what I have and it works perfectly. Greetings!
Mehovushka Posted December 23, 2016 Posted December 23, 2016 Fixed the situation with inaccessible campaigns and airfields. If any problem will steadily be repeated, write in pm.
Seacondor Posted December 23, 2016 Posted December 23, 2016 (edited) Well finally got the game going again by buying a new computer with a GTX1070 card. We came to the conclusion that there were too many issues with the old one to keep trying with it. I have to say I was disappointed to miss out on the lower price for the chapters having only bought them earlier this week. Just my luck. Still not to worry. After I by over the cost of the money I have just laid out to get it going it is going to be worth it. Edited December 23, 2016 by Seacondor
Mainstay Posted December 23, 2016 Posted December 23, 2016 DEVS came across these today. You might wanne give them a try and see if they fix alot of the issues. http://nvidia.custhelp.com/app/answers/detail/a_id/4288 2
1PL-Husar-1Esk Posted December 23, 2016 Posted December 23, 2016 I limited mine in windowed mode at 120 unfortunately there is no 144fps option. Why would you do that? G-sync for sure and probably freesync is made to govern and match fps with monitor refresh rate - so if they are working like they should it is impossible to get higher fps that refresh rate. BTW fps < moniotr refresh rate = stutters fps > moniotr refresh rate = tearing
1PL-Husar-1Esk Posted December 23, 2016 Posted December 23, 2016 I read some guys have probems with Gsync and tearing in fullscreen mode, maybe try to set both fps at 60 and vsync on. Thats what I have and it works perfectly. Greetings! This is not how it should be done/work , it's just workaround but not either the best one - better is windowed mode.
L3Pl4K Posted December 23, 2016 Posted December 23, 2016 (edited) After some hours of playing: -DX11 runs fine -client looks stable for me - Tante JU looks like some intrersting addon for the multiplayer 2 Questions to the Skins. Do we have a privileged start and landing permit with the Adolf skin? Count it as team kill for the red air force, if we use the special pre order skin? All in all, a very good update, thanks to the developers Edited December 23, 2016 by L3Pl4K
Romburch1 Posted December 23, 2016 Posted December 23, 2016 I'm getting an error message when I try and start the game: Can not create Direct 3d device. If you are using Window 7 needs to be at least build 7601. I'm am using Vista Home Premium 64 bit with a nvidia GT 740. Any solutions?
216th_Jordan Posted December 23, 2016 Posted December 23, 2016 (edited) I'm getting an error message when I try and start the game: Can not create Direct 3d device. If you are using Window 7 needs to be at least build 7601. I'm am using Vista Home Premium 64 bit with a nvidia GT 740. Any solutions? You will probably need to install Dx11. Here is a short guide for Vista Users from 2009: http://www.tomshardware.com/picturestory/518-directx-11-vista.html Do this first. Once Dx11 is installed you can check whether or not your game works. Then some additional troubleshooting might be needed. But to be honest: get rid of Vista, it is about the worst product Windows has ever released IMHO. Windows 10 runs very well for me, should you go for it then just make sure on install to choose custom install and uncheck all the "give microsoft data about bla" options. Edited December 23, 2016 by 216th_Jordan
Taxman Posted December 23, 2016 Posted December 23, 2016 Thank you for this great update. All I can say is that 2017 is really looking good going into 2017 and further .
Blooddawn1942 Posted December 23, 2016 Posted December 23, 2016 With this update they laid the foundation for a bright future for Il-2. And with the decision to support TF, the future for the whole WWII CFS genre is looking incredible fantastic! They did such an dedicated and passionate job in 2016! That leaves me speechless and grateful. I wish You guys all the best and to You and Your families, great Christmas and a happy new year!
C6_Werner_VR Posted December 24, 2016 Posted December 24, 2016 (edited) DEVS came across these today. You might wanne give them a try and see if they fix alot of the issues. http://nvidia.custhelp.com/app/answers/detail/a_id/4288 It is OK, no crash!. GTX 780. Edited December 24, 2016 by C6_Werner 1
AstrixAU Posted December 24, 2016 Posted December 24, 2016 (edited) Ok so there are a couple outstanding issues that the guys will fix after their Xmas break. 1. Aiming Help does not work for Joystick mode, only mouse. 2. The smoke has a green tint to it if HDR off. And there will be other odds and ends I am sure, but the main battle to make this update playable for all is accomplished. We'll continue to polish it as we move to the next big steps in the plan. Jason Also there is the tearing in Fullscreen, Gsync and Freesync isn't working. We are using borderless. Thanks Team for the hard work right till the end of the year break! Edited December 24, 2016 by astrix_au
AstrixAU Posted December 24, 2016 Posted December 24, 2016 Why would you do that? G-sync for sure and probably freesync is made to govern and match fps with monitor refresh rate - so if they are working like they should it is impossible to get higher fps that refresh rate. BTW fps < moniotr refresh rate = stutters fps > moniotr refresh rate = tearing Because freesync on my monitor only works between 40-144hz, The game was going up to 200fps normally I stop all my games from going over 144 to stop tearing. The game has no 144 option so I use 120. I read some guys have probems with Gsync and tearing in fullscreen mode, maybe try to set both fps at 60 and vsync on. Thats what I have and it works perfectly. Greetings! I think that means your running Vsync and not Gsync. At least with AMD turning on Vsync disables Freesync. Turn Vsync on to see if Gsync is working in Fullscreen.
FlyingNutcase Posted December 24, 2016 Posted December 24, 2016 Since this update has kicked a*se so good, I just bought 10 Days of Autumn as a bit of a support booster. Nice work devs and a well deserved Merry Xmas to you all.
Hopper64 Posted December 24, 2016 Posted December 24, 2016 I actually had the same thought before the patch. I also bought the campaign as a financial boost for the guys. The kind of support we have here is unmatched. Thanks again for all the hard work/dedication.
Grancesc Posted December 24, 2016 Posted December 24, 2016 To all GTX780 owners: I issued a ticket to nVIDIA support and they proposed to install the hotfix driver 376.48 http://nvidia.custhe...etail/a_id/4288 with the instructions: -> Start the installation-> Select Custom install-> Click Next-> Put a check mark on "Perform a Clean install"-> Click next and continue installation.-> Restart the computer once the installation completes After more than two hours of heavy testing this driver seems to be stable and no crashes since then. Merry Xmas 1
TheSNAFU Posted December 24, 2016 Posted December 24, 2016 Having updated the Nvidia driver I am now able to enjoy the update. And what an update it is. It has turned my rig (I73820@4.3,GTX970) into a beast running the game at 2560x1440 using DSR with every graphics option on and maxed. The game runs at a steady 60 fps per the new counter and is amazingly smooth and fast. A bit of stutter here or there but I haven't even set up anything in the driver control panel yet. This performance was in a large Quick Mission furball over a burning Stalingrad. The game and missions loads faster, the menus run better (again mostly 60 FPS). The overall graphics aremore crisp than before. Prior to the update to ensure smooth play in all situations, I ran the game at 1920x1080 and had to turn off SSAO, HDR and grass distance with AA at 2. The performance gain in this update is simply amazing. I have been sim'ng for many years and have never seen a single update with such achievement as this one. And with the announced joining with TF it maybe the best time ever for our beloved passion. Hats off to the Devs and everyone involved.
vanscov Posted December 24, 2016 Posted December 24, 2016 Hi everyone, I wonder how can I play my old missions again. Even when I try to edit it on "MissionEditor" it is useless. Im not good in english language so simple words are enougth to me. Thank you for the hand pilots! Have a great xmas, greetings!!
ST_ami7b5 Posted December 25, 2016 Posted December 25, 2016 So I tried the hotfix driver for 780 and after some time I had a crash...The truth is, that I have installed also Nvidia Experience with it, which maybe I shouldn't - just wanted to try if it works with the hotfix.Now I reverted back to the stable 368.81 driver.No Nvidia Experience installed.
JG5_Schuck Posted December 25, 2016 Posted December 25, 2016 Yeah, same here But without the Nvidia Experience....... Still get the crashes Back to 368.81
Seacondor Posted December 25, 2016 Posted December 25, 2016 Now I have the new computer the sim is working well except for two things. The first is since the patch the sim looks a bit washed out. (Too bright) I have tried the gamma control and got no change. The other more important issue is the trees are showing model or texture changing as I get close to them. This seems a lot more noticeable since the patch. Is there something I'm not doing? I have a GTX1070 card DX11
Habu Posted December 26, 2016 Posted December 26, 2016 For the tree you can't do anything, it's a lod problem.
Uufflakke Posted December 26, 2016 Posted December 26, 2016 The other more important issue is the trees are showing model or texture changing as I get close to them. This seems a lot more noticeable since the patch. Is there something I'm not doing? I have a GTX1070 card DX11 It is a limitation of the technology according B6: https://forum.il2sturmovik.com/topic/21578-trees-morphing-overhead-view/
Lusekofte Posted December 26, 2016 Posted December 26, 2016 anyone else have a problem with the fps counter...better yet, anyone have a problem and fix it? Same here, and sorry, have not bothered with it. So I have no idea
Seacondor Posted December 26, 2016 Posted December 26, 2016 It is a limitation of the technology according B6: https://forum.il2sturmovik.com/topic/21578-trees-morphing-overhead-view/ Thanks guys. That makes me feel better. I will just live with it.
SCG_Tzigy Posted December 26, 2016 Posted December 26, 2016 glad the update works for almost everyone!! my Nvidia GTX690 not doing well for some reason under win7/dx11 . Have tried everything I could think of, old/new drivers, full, windowed, various vsync options etc. Did not get any increase in FPS, got worse stutters, and online it goes occnly from 45 fps to 2fps, usually low level/targets/bombing etc. had to go down to balanced from ultra..still not great. will keep working on it.
SCG_Tzigy Posted December 27, 2016 Posted December 27, 2016 glad the update works for almost everyone!! my Nvidia GTX690 not doing well for some reason under win7/dx11 . Have tried everything I could think of, old/new drivers, full, windowed, various vsync options etc. Did not get any increase in FPS, got worse stutters, and online it goes occnly from 45 fps to 2fps, usually low level/targets/bombing etc. had to go down to balanced from ultra..still not great. will keep working on it. ok, update got the game pretty stable and running smooth again at 60-80 fps. latest nvidia drivers with hotfix, sli support checked, windowed mode, vsync off, AAx4 in game only, NORML view distance, unlimited FPS. 2560x1600, running on high, ssao, hdr off. NCP all application controlled, high quality, max perf, -1.0000 LOD bias in nvidia inspector. the 4 x distance proved to be the main stutter/low fps culprit...(was running everything maxed before 2.006, minus HDR
dburne Posted December 27, 2016 Posted December 27, 2016 Hey gang, Question on the new scripted campaign, 10 days of Autumn. I was about to get it, but from what I am seeing it appears it is a German side flying campaign only? Any way to fly for the other side in this campaign? Thanks for any info,
Dakpilot Posted December 27, 2016 Posted December 27, 2016 No it is only for German side, Alberts life by Syn_Haashashin https://forum.il2sturmovik.com/topic/25066-alberts-life/ and Sturmoviks over Stalingrad by Juri_JS https://forum.il2sturmovik.com/topic/19048-sturmoviks-over-stalingrad-mission-pack/ are currently being updated to 2.06 and are on Soviet side Although not in the new "campaign" format, are certainly worth a try, and is good give support/feedback for Mission makers who will go on to use the new mode Cheers Dakpilot 1
dburne Posted December 27, 2016 Posted December 27, 2016 No it is only for German side, Alberts life by Syn_Haashashin https://forum.il2sturmovik.com/topic/25066-alberts-life/ and Sturmoviks over Stalingrad by Juri_JS https://forum.il2sturmovik.com/topic/19048-sturmoviks-over-stalingrad-mission-pack/ are currently being updated to 2.06 and are on Soviet side Although not in the new "campaign" format, are certainly worth a try, and is good give support/feedback for Mission makers who will go on to use the new mode Cheers Dakpilot Good to know, gives me a place to start now - much thanks for the info!!
Juri_JS Posted December 27, 2016 Posted December 27, 2016 Hey gang, Question on the new scripted campaign, 10 days of Autumn. I was about to get it, but from what I am seeing it appears it is a German side flying campaign only? Any way to fly for the other side in this campaign? Thanks for any info, In January I will release a Yak-1 campaign for the Stalingrad map. 2
dburne Posted December 27, 2016 Posted December 27, 2016 In January I will release a Yak-1 campaign for the Stalingrad map. Sounds awesome, I will be looking forward to this one - especially as that is my plane of choice. Thanks,
ST_ami7b5 Posted December 27, 2016 Posted December 27, 2016 In January I will release a Yak-1 campaign for the Stalingrad map. Great, Juri!
Ala13_knightcrow Posted December 28, 2016 Posted December 28, 2016 Hello folks, I've been trying to push in NVIDIA forums to get somebody from NVIDIA involved in finding a solution for those of us with a 780. This is what I've been told: If we want NVIDIA staff to be working on a driver implementation compatible with il2 and 780's, 1C developers and customers are encouraged to provide them with technical information at http://surveys.nvidia.com/index.jsp?pi=6e7ea6bb4a02641fa8f07694a40f8ac6 Kind regards, Ala13_knightcrow 1
Thad Posted December 28, 2016 Posted December 28, 2016 Salutations, I have a consistent problem launching IL2. By 'consistent' I mean every time I try to get into multiplay with the green [ENTER] button I receive the following messages.... every time. #1 No connection with authorizing sever. #2 Your connection to Master Sever was temporarily lost. Check your internet connection. Firstly, my internet connection is fine. Also, I can start the game OFFLINE. Now here is the weird part... if I click on New User Registration, I can then get into multiplayer. I've been a registered user since I purchased the game. Is there something on my end that needs to be done. This loading situation is annoying and I have enough annoyance attempting to learn to use the mission editor.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now