Jump to content

Recommended Posts

DeadlyMercury
Posted

Seems there is something very wrong with AR 234 when FFB is enabled.

For most of the planes including Me 262 - stick while dead on the ground (moves full forward under the weight of elevator), with speed it slowly moves to the center or near it with neutral trims. Including Me-262 - if you don't touch the stick during take off, it  will slowly move from "full forward" to center position.

 

But in case of Ar 234 - stick doesn't move to the center and sits at about 75% full forward. Not exactly like "dead stick heavy elevator", but very close to it. And as result - you constantly pull it in every situation and even with different load. If you don't pull it - level flight can be achieved only with stabilizer close to full TH, additionally elevator is always deflected down visually.

 

With disabled FFB there is no such issue.

 

This is how it looks right after load - auto level is enabled.

sbCfKFJ.jpg

 

Disabling auto level - and plane goes into dive while stick moves forward and elevator moves down:

XHNIoom.jpg

 

"Level flight" with stabilizer 50-55% tail heavy:

AvL3GWs.jpg

QbqbGVF.jpg

 

FFB disabled - plane continues to flight straight after disabling auto level, no need to pull:

hyDeoXi.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...