Gunfreak Posted September 17, 2023 Posted September 17, 2023 So if I fly with high settings, open xr I get decent 60fps. If I fly with ultra settings steam vr and foveated rendering going. I get some 55-65fps. But I get this tiny stuttering effect. By going from msaa to fxaa, I jump 20fps up to around 80. Still kinda get this stuttering effect. I have an i7 13700k, 3090, 64gig ram. Changing steam vr resolution from 3716x4396 to something I can't remember×4028 did very little for the FPS.
Charlo-VRde Posted September 18, 2023 Posted September 18, 2023 7 hours ago, Gunfreak said: So if I fly with high settings, open xr I get decent 60fps. If I fly with ultra settings steam vr and foveated rendering going. I get some 55-65fps. But I get this tiny stuttering effect. By going from msaa to fxaa, I jump 20fps up to around 80. Still kinda get this stuttering effect. I have an i7 13700k, 3090, 64gig ram. Changing steam vr resolution from 3716x4396 to something I can't remember×4028 did very little for the FPS. We’ve been discussing Crystal settings in this thread, which you might find helpful if you didn’t notice it before:
Gunfreak Posted September 18, 2023 Author Posted September 18, 2023 I saw that one, but it's all about Pimax, open xr and SteamVR settings. I'm asking about IL2 settings.
56RAF_Roke Posted September 18, 2023 Posted September 18, 2023 Given the Crystal's resolution, do you need FXAA at all? Does turning it off get you closer to 90fps..?
Charlo-VRde Posted September 18, 2023 Posted September 18, 2023 1 hour ago, Gunfreak said: I saw that one, but it's all about Pimax, open xr and SteamVR settings. I'm asking about IL2 settings. Here are my settings with my Pimax Crystal: PimaxClient at 1.0 render, SteamSS set to 80% in the General and Video tabs of SteamVR, indicating a resolution per eye of 3856 x 4560. However, SteamVR further set to 87% in my "Per-Application Video Settings" for IL-2, so 3596 x 4256 per eye. When using 90 Hz mode and no DFR, that allows me to keep my FPS in the upper 80s or at 90 in both MP and in a Quick Mission with 8 fighters and 8 two-engine attackers over Kuban. My GPU frametimes stay in the low 8 ms, CPU low 7 ms, and this has been the smoothest experience amongst my tests. 37 minutes ago, 56RAF_Roke said: Given the Crystal's resolution, do you need FXAA at all? Does turning it off get you closer to 90fps..? Yep, even with my Reverb G2 and a 3090 I was running with no AA, and I also don’t run AA in the Crystal and a 4090. 2
CAG_Sanders Posted March 10, 2024 Posted March 10, 2024 On 9/18/2023 at 2:08 AM, Charlo-VR said: Here are my settings with my Pimax Crystal: PimaxClient at 1.0 render, SteamSS set to 80% in the General and Video tabs of SteamVR, indicating a resolution per eye of 3856 x 4560. However, SteamVR further set to 87% in my "Per-Application Video Settings" for IL-2, so 3596 x 4256 per eye. When using 90 Hz mode and no DFR, that allows me to keep my FPS in the upper 80s or at 90 in both MP and in a Quick Mission with 8 fighters and 8 two-engine attackers over Kuban. My GPU frametimes stay in the low 8 ms, CPU low 7 ms, and this has been the smoothest experience amongst my tests. Yep, even with my Reverb G2 and a 3090 I was running with no AA, and I also don’t run AA in the Crystal and a 4090. Tried to replicate and my FPS was more on the high 70s low 80s until all the planes were shot down than it went 90s. 7800x3d with 4090. Not sure what other magic you have to make it work.
Charlo-VRde Posted March 10, 2024 Posted March 10, 2024 (edited) 9 hours ago, I./JG3_Col_Sanders said: Tried to replicate and my FPS was more on the high 70s low 80s until all the planes were shot down than it went 90s. 7800x3d with 4090. Not sure what other magic you have to make it work. I don’t know if this makes a difference but I run an i7 13700k Edited March 10, 2024 by Charlo-VR
C6_Werner_VR Posted March 12, 2024 Posted March 12, 2024 (edited) On 9/18/2023 at 11:08 AM, Charlo-VR said: Here are my settings with my Pimax Crystal: PimaxClient at 1.0 render, SteamSS set to 80% in the General and Video tabs of SteamVR, indicating a resolution per eye of 3856 x 4560. However, SteamVR further set to 87% in my "Per-Application Video Settings" for IL-2, so 3596 x 4256 per eye. When using 90 Hz mode and no DFR, that allows me to keep my FPS in the upper 80s or at 90 in both MP and in a Quick Mission with 8 fighters and 8 two-engine attackers over Kuban. My GPU frametimes stay in the low 8 ms, CPU low 7 ms, and this has been the smoothest experience amongst my tests. Yep, even with my Reverb G2 and a 3090 I was running with no AA, and I also don’t run AA in the Crystal and a 4090. Tries to switch to sharpen "landscape filter" and activates the sharpen box on the right and disables HDR. I’m on Aero now 5080x4335 steamVR at 150%, 80 at 90Fps. startup.cfg: [KEY = graphics] 3dhud = 0 adapter = 0 bloom_enable = 0 canopy_ref = 0 desktop_center = 1 detail_rt_res = 4096 draw_distance = 1.00000 far_blocks = 1 fps_counter = 1 fps_limit = 0 full_height = 480 full_width = 640 fullscreen = 0 gamma = 1.00000 grass_distance = 0.00000 hdr_enable = 0 land_anisotropy = 1 land_detail = 3 land_tex_lods = 3 max_cache_res = 1 max_clouds_quality = 3 mgpu_compatible = 0 mirrors = 1 msaa = 0 multisampling = 2 or_ca = 0.00000 or_dummy = 0 or_enable = 1 or_height = 4352 or_hud_rad = 1.50000 or_hud_size = 0.75000 or_ipd = 0.06300 or_render_eye = 0 or_sipdc = 0.00000 or_width = 5080 post_sharpen = 1 preset = 3 prop_blur_max_rpm_for_vr = 155 rescale_target = 1.00000 shadows_quality = 0 ssao_enable = 0 stereo_dof = 5.00000 vsync = 0 win_height = 480 win_width = 640 [END] Edited March 12, 2024 by C6_Werner_VR
Youtch Posted March 13, 2024 Posted March 13, 2024 On 3/12/2024 at 5:31 AM, C6_Werner_VR said: Tries to switch to sharpen "landscape filter" and activates the sharpen box on the right and disables HDR. I’m on Aero now 5080x4335 steamVR at 150%, 80 at 90Fps. startup.cfg: [KEY = graphics] 3dhud = 0 adapter = 0 bloom_enable = 0 canopy_ref = 0 desktop_center = 1 detail_rt_res = 4096 draw_distance = 1.00000 far_blocks = 1 fps_counter = 1 fps_limit = 0 full_height = 480 full_width = 640 fullscreen = 0 gamma = 1.00000 grass_distance = 0.00000 hdr_enable = 0 land_anisotropy = 1 land_detail = 3 land_tex_lods = 3 max_cache_res = 1 max_clouds_quality = 3 mgpu_compatible = 0 mirrors = 1 msaa = 0 multisampling = 2 or_ca = 0.00000 or_dummy = 0 or_enable = 1 or_height = 4352 or_hud_rad = 1.50000 or_hud_size = 0.75000 or_ipd = 0.06300 or_render_eye = 0 or_sipdc = 0.00000 or_width = 5080 post_sharpen = 1 preset = 3 prop_blur_max_rpm_for_vr = 155 rescale_target = 1.00000 shadows_quality = 0 ssao_enable = 0 stereo_dof = 5.00000 vsync = 0 win_height = 480 win_width = 640 [END] May I ask what are your computer specs to ran this config and the average fps you get?
C6_Werner_VR Posted March 13, 2024 Posted March 13, 2024 (edited) i9 13900KS (the 8 P-core runs at 5.9Ghz with il-2 in VR in use bill2's priority hight, 6ghz with a 2560x1440 screen ) and Thermal Grizzly CPU Contact Frame, Asus Z790 Apex, 2x16G DDR5 8000Mhz V-Color, 4090 Inno3D frostbite ultra, SSD Kingston FURY Renegade 2To, Asus Rog thor 1200w. Full tower case Thermaltake Core X71. Watercooling custom, pump D5 top EK rev2.0, Wtb EK-Quantum Magnitude Full Nickel, 3 radiators alphacool hight flow and Fan Corsair ML, Wtb supplementary backplate 4090 made by MP5Works. With these settings for il-2 i am 99% GPU usage for 420W of power and CPU and when to him in 130/150w for 50/55% usage. Edited March 14, 2024 by C6_Werner_VR 1
DBCOOPER011 Posted March 15, 2024 Posted March 15, 2024 On 3/13/2024 at 1:33 PM, C6_Werner_VR said: i9 13900KS (the 8 P-core runs at 5.9Ghz with il-2 in VR in use bill2's priority hight, 6ghz with a 2560x1440 screen ) and Thermal Grizzly CPU Contact Frame, Asus Z790 Apex, 2x16G DDR5 8000Mhz V-Color, 4090 Inno3D frostbite ultra, SSD Kingston FURY Renegade 2To, Asus Rog thor 1200w. Full tower case Thermaltake Core X71. Watercooling custom, pump D5 top EK rev2.0, Wtb EK-Quantum Magnitude Full Nickel, 3 radiators alphacool hight flow and Fan Corsair ML, Wtb supplementary backplate 4090 made by MP5Works. With these settings for il-2 i am 99% GPU usage for 420W of power and CPU and when to him in 130/150w for 50/55% usage. Yes, that seems to be a powerhouse! Just googled the bill2 program and using it now. Seems to work rather well..
Youtch Posted March 15, 2024 Posted March 15, 2024 8 hours ago, DBCOOPER011 said: Yes, that seems to be a powerhouse! Just googled the bill2 program and using it now. Seems to work rather well.. May i ask if it works as well for Intel and AMD? Could you share the type of configuration you apply to IL2? Googling it, I found only discussion for the server side. Many thanks in advance, y.
DBCOOPER011 Posted March 15, 2024 Posted March 15, 2024 5 hours ago, Youtch said: May i ask if it works as well for Intel and AMD? Could you share the type of configuration you apply to IL2? Googling it, I found only discussion for the server side. Many thanks in advance, y. I just have it setup now to automatically change the cpu priorty on certain applications. I havent used the cpu affinity or other settings yet, but it appears to work well so far on my AMD cpu.. 1
Youtch Posted March 16, 2024 Posted March 16, 2024 20 hours ago, DBCOOPER011 said: I just have it setup now to automatically change the cpu priorty on certain applications. I havent used the cpu affinity or other settings yet, but it appears to work well so far on my AMD cpu.. Thanks for your answer. I understand you configure a rule to put high priority for IL2, or other programs as well related to VR? Did it shows some improvement? Thanks again
DBCOOPER011 Posted March 17, 2024 Posted March 17, 2024 13 hours ago, Youtch said: Thanks for your answer. I understand you configure a rule to put high priority for IL2, or other programs as well related to VR? Did it shows some improvement? Thanks again I cant say it has helped in regards to any FPS type of gain, but I believe it has helped somewhat in keeping stutters down some. I encounter stutters while under the frametime limit at times when there are numerous AI/Mulitplayer activity occuring. I belive this is occurs due to the CPU working beyond its limits during those period of times, may be wrong though..
Youtch Posted March 17, 2024 Posted March 17, 2024 For stutter, I use ISLC, Intelligent Standby List Cleaner, as per the recommendation of another thread, and it really works great. 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now