=WBR=Filbee Posted May 27, 2023 Posted May 27, 2023 Logitech Throttle Quadrant Purchased & installed recently (3 weeks ago) and worked properly until 4 days ago. Tried re-booting, different USB port, re-mapping but it it's still not working as it did on the first install. Is there a possible conflict with the JS (Logitech Extreme 3d Pro) or is it a software issue, perhaps with the recent update. I'd be grateful for any advice out there. Cheers =WBR=Filbee
Guest deleted@83466 Posted May 27, 2023 Posted May 27, 2023 Probably need more information. What’s it doing? The light is on? I doubt there is a conflict with the Logitech joystick. Did you manually install a Logitech driver? I always used the Logitech (or previously Saitek throttle) devices as pure plug and play. Some of them became jittery and unreliable after a short period of time, but never that soon.
cardboard_killer Posted May 27, 2023 Posted May 27, 2023 2 hours ago, =WBR=Filbee said: I'd be grateful for any advice out there. First and foremost, is it recognized by Windows, or otherwise working in other games?
=WBR=Filbee Posted May 28, 2023 Author Posted May 28, 2023 LED light is on. Since there was no instruction or CD to put driver SW, I assumed a plug'n'play device which is exactly what happened, even though I probably mapped the levers incorrectly, I had an independent mixture, RPM and throttle control. A few day ago this was no longer available and I re-mapped but now all I can achieve is a throttle which is also automatically linked to the RPM, so 2 levers are redundant. I have downloaded SW from Logitech just in case but it's made no difference. I don't see the device listed anywhere and when mapped, the settings recognise it as a joystick. However, the "proper" JS still functions as before. So I'm confused as to what I may have (inadvertently) changed and have no idea how to rectify atm. Any advice will be gratefully received and tried! <S> Phil
cardboard_killer Posted May 28, 2023 Posted May 28, 2023 Okay, so you have some function, but not all function. (note that in IL-2 it will be called a "joystick-#", not a throttle, or even pedals once you get those). When setting up a device, sometimes it is necessary to move the lever back and forth to get a recognition, and even then you may have to open the input response screen, save, then open it again for that screen to become active. I will assume you are doing that, so a couple more questions: (1) what realism settings are you using, especially the Piloting Asistance ones? (2) does the problem persist over different control profiles?
Sgt_Joch Posted May 28, 2023 Posted May 28, 2023 (edited) I have the throttle quadrant and it works perfectly in IL2. Have you tried restarting the mapping from scratch? Edited May 28, 2023 by Sgt_Joch
=WBR=Filbee Posted May 28, 2023 Author Posted May 28, 2023 I will check the piloting assistance, I haven't deliberately changed this at any time but will ensure only auto pilot is ticked. Yes I have tried re-mapping from scratch but it has the same result. One question: we have 3 options to map the settings for each function, which one is the dominant selection and will be used if, for example, the default is a double keystroke and is replaced or re-mapped to an external device such as the throttle, RPM or mixture. I'm not absolutely clear about this. Thanks for the input, it's much appreciated. <S> Phil
=WBR=Filbee Posted May 28, 2023 Author Posted May 28, 2023 (edited) Where is the check box for piloting assistance? The user profile makes no difference, I've tried 2 so far. I now see the game recognises the JS as "joy0" and the quad throt as "joy1" so it see the differences... Edited May 28, 2023 by =WBR=Filbee
cardboard_killer Posted May 28, 2023 Posted May 28, 2023 42 minutes ago, =WBR=Filbee said: we have 3 options to map the settings for each function, which one is the dominant selection There is not dominant selection. All can be used at the same time, with crazy results. 4 minutes ago, =WBR=Filbee said: Where is the check box for piloting assistance? Go to the Realism box in the quick mission screen, and the choice will become the default.
=WBR=Filbee Posted May 28, 2023 Author Posted May 28, 2023 That did it, all the check boxes were "checked". How that happened I don't know as I've not touched it. But thanks, now all I need to do is reconfigure the views and no doubt there'll be a few other anomalies. Thanks cardboard_killer <S> Phil
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now