Jump to content

Updated Radar-Normandy-v01-for-EMG-channel (for german missions) for offline missions


Recommended Posts

Posted (edited)

Updated 09.09.22:

EMG Channel Template with preinstalled Radar-Normandy-v01-for-EMG-Channel

for flying in the Calais - Abbeville - Manston - Hawkinge -Lympne Area with reduced ground structures.

If you use this Template no further Installation for the Radar-Normandy-v01... required

 

 

Hi,

here my "Radar-Subtitle" group for the new Normandie map / EMGv66 Channel area.

-for german missions, but can be easy changed for allied missions by exchanging the coalitions in the group by text editing.

-probability of detection (random), subtitle text size and position can be changed by text editing.

Installation:

-open the EMG mission

-care for that no elements are selected

-load group with "Import from File"

-save mission / exit

 

How it works

When flying the mission you will get messages of the enemy plane locations in the left / up corner of the screen.

As already mentioned probability of detection (random), subtitle text size and position can be changed by text editing.

1291476998_subtitlewithmessage.thumb.jpg.6bd4ce40381b0256e0f121fedb2a5429.jpg

 

Radar-Normandy-v01-for-EMG-channel.zip

Coop-Template-THE CHANNEL-reduced-buildings-with-Radar-Channel.zip

Edited by kraut1
EMG Channel Template with preinstalled Radar
  • Like 2
  • Upvote 1
  • kraut1 changed the title to Updated Radar-Normandy-v01-for-EMG-channel (for german missions) for offline missions
Posted

Updated 09.09.22:

EMG Channel Template with preinstalled Radar-Normandy-v01-for-EMG-Channel

for flying in the Calais - Abbeville - Manston - Hawkinge -Lympne Area with reduced ground structures.

If you use this Template no further Installation for the Radar-Normandy-v01... required

  • Like 1
  • 2 years later...
Posted

Hi Kraut

I'd like to check this out, but since your post is two years old, I think that Vander may have updated the CoopTemplate_The Channel.mission since?

What do you recommend?

Posted
6 hours ago, Roshko said:

Hi Kraut

I'd like to check this out, but since your post is two years old, I think that Vander may have
What do you recommend?

Yes, the Channel template is changed.

-Download / install new EMGv85

-open the Channel Template

-activate the Static group

-import from file the radar group. It should be inside of the static group.

-you will see that the radar checkzones are in the Channel Area as it was defind in2022.

-if you have problems or if you need radar for a bigger area please let me know.

  • Thanks 1
Posted (edited)

I loaded up CoopTemplate_THE CHANNEL.mission in the mission editor, and clicked the static group.
image.png.fbbdd22e81f2a665e3330c63525f4504.png

Then I imported Radar-Normandy-v01-for-EMG-channel

image.png.86a669b444adf7216ad2187c256a4d48.png

I then saved the mission back to CoopTemplate_THE CHANNEL. Looking in CoopTemplate_THE CHANNEL.eng I see the added radarwarnings (that I had translated to english 2644:Radar: Enemy planes in XXXX).

However looking in the EMG-generated missions *.eng file, there was no trace of the new radarwarnings.

image.png.8eafa49463cc1e1b70c7a130d98cc621.png

I flew the mission as a german in a Bf-110. I saw EMGs "enemy detected" and "grid XXXX under attack" warnings, but of course I never saw your radar-warnings

So I must be doing something wrong?
 

 

 

Edited by Roshko

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...