Jump to content

Recommended Posts

Posted (edited)

Hello to all!

Been r/c modeler many years now but due to covid19 stopped flying  last 2 years  and start virtual flying il2 with VR!

I have to admit that i am addicted to VR warbird flying now hope to come back to r/c modeling some day..!

 

Here i present you my babies!!!

 

1.

1/4 scale FW 190 A8 all glass construction

wingspan 2,65 meters/ 104 inches

weight 27 kgr/60 pounds

engine 160 cc two stroke boxer type

 

fw 190 (2)fw 190 (1)

fw 190 (6)

 

 

fw 190 (5)

 

 

 

 

 

3

 

2

 

4

 

78

 

3

 

cockpit

 

.. missing boots and rudder pedals when photo was taken...

 

coming with maiden flight video soon.

Edited by dgiatr
  • Like 20
  • Upvote 2
Posted

Beautiful!

 

Other than choosing to avoid places where freakshows congregate, I didn’t stop doing a damn thing due to the cooties. Get out there and fly.

Posted (edited)

cockpit2

 

40 minutes ago, Gambit21 said:

Beautiful!

 

Other than choosing to avoid places where freakshows congregate, I didn’t stop doing a damn thing due to the cooties. Get out there and fly.

Thank you Gambit21!

 

Its not that i am afraid due to covid19 so much, but it is that i have two kids growing up and cannot spend much money and time to r/c modeling anymore like i used to.

my r/c field is also far away from home but my passion for that never dies!

Edited by dgiatr
Posted (edited)

 

Video from maiden flight...sorry for such a  bad quality it was taken from a cheap phone..

 

Edited by dgiatr
  • Like 13
  • Upvote 2
Posted

Nice landing, don't see landings like that very often.  ?

  • Upvote 2
firdimigdi
Posted

Holy crap that's very nice work (and quite the smooth landing on the maiden flight video), all you got to do now is up the scale by a factor of 4 and you're set! Was this based off some kit or completely DIY?

Posted (edited)
20 hours ago, Firdimigdi said:

, all you got to do now is up the scale by a factor of 4 and you're set!

Yes trying to find an upscaler method like FSR or NIS some years now in R/C modeling but it is quite difficult in real life ? ?

20 hours ago, Firdimigdi said:

 Was this based off some kit or completely DIY?

 

its a "SIST" manufacturer composite kit with custom made landing gears.

 

DSCN0755(1)

 

20 hours ago, Drum said:

Nice landing, don't see landings like that very often.  ?

Thank you Drum!

Edited by dgiatr
Posted

Very nice!

Guest deleted@83466
Posted (edited)

OMG.  If there weren’t scale references in there, I’d think I was looking at the genuine article.  If it were even possible for me to build something like this (I’m a very amateur plastic modeler), I seriously doubt I’d have the guts to take it into the air, so that’s equally impressive. I mean, seriously awesome machine you have there.

 

 

Edited by SeaSerpent
Posted
1 hour ago, SeaSerpent said:

OMG.  If there weren’t scale references in there, I’d think I was looking at the genuine article.  If it were even possible for me to build something like this (I’m a very amateur plastic modeler), I seriously doubt I’d have the guts to take it into the air, so that’s equally impressive. I mean, seriously awesome machine you have there.

 

 

Thank you SeaSerpent for your kind words!

To be honest haven't flown it again since i painted it... i think it will be harder than the first time i did its maiden flight

Jason_Williams
Posted

Very nice RC warbird!

 

Jason

Posted
6 hours ago, dgiatr said:

Thank you SeaSerpent for your kind words!

To be honest haven't flown it again since i painted it... i think it will be harder than the first time i did its maiden flight

 

You're a better man than me if you can send that up now!

I'd be tempted to hang it as a static model.

Posted (edited)
14 hours ago, Jason_Williams said:

Very nice RC warbird!

 

Jason

 

Thank you Jason , glad you like it!

 

 

So next in line is :

 

2. 

1/4.6 scale WESTLAND LYSANDER ,

scratch build  wood and fabric constraction

wingspan 3,30 meters/130 inches

weight 21 kgr / 46,3 pounds

engine 80 cc two stroke

 

Model lately finished, hasn't flown yet

 

9

 

8

 

7110

 

Edited by dgiatr
  • Like 11
Posted

They are both absolutely gorgeous!

 

I'm a bit (read a lot) envious. :)

 

Esso

firdimigdi
Posted
6 hours ago, dgiatr said:

WESTLAND LYSANDER

 

That's an Interesting choice made even more interesting that you chose to include the winglets.

 

7 hours ago, dgiatr said:

scratch build  wood and fabric constraction

 

And now you got me curious to see your workshop!

Posted (edited)
6 hours ago, SFF_Esso said:

They are both absolutely gorgeous!

 

I'm a bit (read a lot) envious. :)

 

Esso

Τhank you Esso!

Dont be envious...endless time, much money and my worst nightmare is in case i die my wife would sell my r/c planes as much as i told her they cost?

5 hours ago, Firdimigdi said:

 

That's an Interesting choice made even more interesting that you chose to include the

Yes Firdimigdi you are right , its an intresting and rare subject and it flies really well.

Edited by dgiatr
  • Thanks 1
  • Upvote 1
Posted

wow

 

Posted (edited)

So next is :

 

3.

1/5 scale AT6 TEXAN fiberglass kit,

wingspan 2,60 meters / 102,4 inches

weight 19 kgr / 42 pounds

engine 80 cc two stroke

custom made landing gear

many modifications to look more scale

scratch build cockpit and canopy

 

 

kali 27

 

1

 

3

 

Scale 2018-29

 

2!

 

oxi11

 

Scale 2018-8

 

Scale 2018-26

 

 

Video of a dead stick landing due to engine overheat

 

Edited by dgiatr
  • Like 10
Posted
1 hour ago, dgiatr said:

So next is :

 

3.

1/5 scale AT6 TEXAN fiberglass kit,

wingspan 2,60 meters / 102,4 inches

weight 19 kgr / 42 pounds

engine 80 cc two stroke

custom made landing gear

many modifications to look more scale

scratch build cockpit

 

 

kali 27

 

1

 

3

 

Scale 2018-29

 

2!

 

oxi11

 

Scale 2018-8

 

Scale 2018-26

 

 

Video of a dead stick landing due to engine overheat

 


Absolute works of art, just wonderful!

 

  • Upvote 1
Posted (edited)

No4 :

 

1/4.3 scale P51 fiberglass kit
wing span 2,54 meters/100 inches
weight 20 kgr / 44 pounds
Engine Gas 95 cc two stroke 
 

 

jklh

 

DSCN1380

 

DSCN13723DSCN1376

 

Edited by dgiatr
  • Like 6
  • Upvote 1
Posted (edited)
On 7/5/2022 at 2:55 AM, Gambit21 said:

 

You're a better man than me if you can send that up now!

I'd be tempted to hang it as a static model.

No hangar queens.....i used to say!!....but since then and the last two years due to covid19 i had a good reason not to send it up...now i have to find a new one??

 

Edited by dgiatr
  • Haha 1
Posted (edited)

Ok so next is my

 

No5 :

1/5.1 P40 scale fiberglass kit

wing span  2,210 meters/ 87 inches
Flying weight 14.5 kg / 32 pounds                  
Engine Gas   75 cc two stroke
 

 

DSCN0117

 

DSCN0109

 

1111!

 

99!

 

IMAG0502

 

.2

 

33

 

Edited by dgiatr
  • Like 5
Posted (edited)

F34F6CF3-147F-49CD-A8B5-84463F62D936.jpeg

A0AF25E6-37A1-4DDC-BE2B-57946C1A0A82.jpeg

Edited by RAYEU
FPV Drone VR Joystick DJI
firdimigdi
Posted
56 minutes ago, RAYEU said:

FPV Drone VR Joystick DJI

 

Quadcopters are all nice and all but, considering the above display of lovingly recreated gas-powered warbirds I think maybe you need to start a separate thread.

Posted (edited)
3 hours ago, Firdimigdi said:

 

Quadcopters are all nice and all but, considering the above display of lovingly recreated gas-powered warbirds I think maybe you need to start a separate thread.

No problem Firdimigdi, all R/C engines are welcomed here!!?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Edited by dgiatr
  • Like 1
Posted (edited)

1/5 scale FW 190 D9 fiberglass kit

wing span  2,1 meters/  82,7 inches
Flying weight 13 kg / 28,6 pounds                  
Engine Gas   75 cc two stroke

 

 

 

fw 190 d9 (5)fw 190 d9 (6)fw 190 d9 (4)fw 190 d9 (3)fw 190 d9 (2)fw 190 d9 (1)fw 190 d9 (13)fw 190 d9 (12)fw 190 d9 (11)

fw 190 d9 (10)fw 190 d9 (9)fw 190 d9 (8)fw 190 d9 (7)

 

Edited by dgiatr
  • Like 9
Posted

wth

 

how many do you have???

 

you have a hangar to store all these????

 

the dora is a beauty...

The landing SLAPS

  • Like 1
Posted
3 hours ago, SCG_Tzigy said:

 

 

the dora is a beauty...

The landing SLAPS

 

Thank you SCG_Tzigy!, yes i agree fw 190 d9 is one of my favorite!

On 7/6/2022 at 9:26 AM, Hoots said:


Absolute works of art, just wonderful!

 

Thank you Hoots, At6 texan scale detailing and weathering took me many many hours!

  • Like 1
Posted
On 7/8/2022 at 12:13 AM, Firdimigdi said:

 

Quadcopters are all nice and all but, considering the above display of lovingly recreated gas-powered warbirds I think maybe you need to start a separate thread.


Agreed.

Any doofus can buy and fly a drone.

 

  • Like 1
Posted (edited)

double the trouble double the fun!

 

1/6.6 scale BF 110 ZERSTORER

fiberglass kit

Wing span: 2.413 m / 95 inches
Flying weight: 14 kg / 31 pounds
Engines: 2x 26 cc two stroke gas

 

DSC06647

 

 

Edited by dgiatr
  • Like 4
  • Upvote 2
Posted (edited)

 

1/7.5 scale F7F Tigercat fiberglass kit
Wing span: 2,105 m/  82.9 inches
Flying weight: 15 kg / 33 pounds
Engine: 2x30 cc two stroke gas

 

tigercat (2)

 

tigercat (3)

 

tigercat (1)

 

...sorry for the bad video quality...

Edited by dgiatr
  • Like 4
Posted

Gorgeous!

  • Like 1
Posted (edited)
14 hours ago, Gambit21 said:

Gorgeous!

Thank you Gambit21!

 

I want to thank all of you guys for your likes!!?

 

So next is :

 

1/5 scale SPITFIRE fiberglass kit

Wing span: 2,260 m / 89 inches

Flying weight: 16 kg / 35 pounds

Engine: 55 cc two stroke gas engine

 

Model was rebuilt after a serious crash due to the destruction of engine base while flying!

 

DSC06494

 

DSC06488

 

DSC_0393

 

Edited by dgiatr
  • Like 4
Posted (edited)

 

an intresting video with prop breakage while flying....

 

 

Edited by dgiatr
  • Like 1
Posted

These models are absolutely gorgeous!

  • Like 1
Posted
On 7/13/2022 at 9:07 AM, ZachariasX said:

These models are absolutely gorgeous!

Thank you ZachariasX!

 

So next is my Bf 109...

 

 

DSC06533

 

DSC06525

 

OgSDJBn5nN3MjbkIVi18bIrFVfEnATVDwtft5x8x6aQ

 

 

 

  • Like 5
  • 3 weeks later...
Posted (edited)

Hello to all!

next there are my older models....

So is LA-7 , another BF 109,one bearcat with broken rudder and one zero....

 

IMG_1111676

 

IMG_11116261

 

317669512604_2593dbf297_bIMAG0407IMAG0412IMAG0413

 

Edited by dgiatr
  • Like 1
Posted (edited)

Video of La7 belly landing due to landing gears malfunction!!

 

 

Video of bf 109

 

Video of Zero

 

Video of Bearcat and tail flutter due to high g loads!!

 

Edited by dgiatr
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...