Jump to content

Yes, I have Read the Getting Started manual


Recommended Posts

[Florida]Florida1146
Posted

First question: When I run the Joystick Wizard, set each page and click on Save, what file is created/built? It tells me it is saving to Confuser.ini. After going through every screen and setting/saving each binding, I go to the confUser.ini file in the CODB folder, and none of my bindings is present. The bindings ARE working as I set them, so it's not that my controllers aren't being seen. How does the Wizard work, and where is it hiding the controls?

 

When I launch CODB in Steam and open the Controls, none of the bindings is correct, i.e. my ailerons and elevator are somehow assigned to my throttle (I have a Logitech X-56 HOTAS, which works fine, BTW, in the IL-2 Stalingrad, etc.), and I am not allowed to clear and change any of those assignments within CODB. I launch the 1st Training flight, and none of my controls are working.

 

This is frustrating, and there must be a better way of doing this.

 

-= Florisa =-

  • Team Fusion
Posted
44 minutes ago, [Florida]Florida1146 said:

First question: When I run the Joystick Wizard, set each page and click on Save, what file is created/built? It tells me it is saving to Confuser.ini. After going through every screen and setting/saving each binding, I go to the confUser.ini file in the CODB folder, and none of my bindings is present. The bindings ARE working as I set them, so it's not that my controllers aren't being seen. How does the Wizard work, and where is it hiding the controls?

 

When I launch CODB in Steam and open the Controls, none of the bindings is correct, i.e. my ailerons and elevator are somehow assigned to my throttle (I have a Logitech X-56 HOTAS, which works fine, BTW, in the IL-2 Stalingrad, etc.), and I am not allowed to clear and change any of those assignments within CODB. I launch the 1st Training flight, and none of my controls are working.

 

This is frustrating, and there must be a better way of doing this.

 

-= Florisa =-

Where is your game installed?

 

Is it on C Drive or another Drive?

[Florida]Florida1146
Posted

C drive, with all of the other Steam apps, in the requisite folder.

  • Team Fusion
Posted
3 hours ago, [Florida]Florida1146 said:

C drive, with all of the other Steam apps, in the requisite folder.

Where is the documents folder?

 

Also, have you checked to see if Windows is numbering your joystick and other peripherals incorrectly?  Your joystick should be #1.

 

Make sure Windows is not allowed to turn off the power to the USB connections to your joystick and peripherals.

 

Make sure Steam is not allowing "Generic Gamepad Support"... see the link below for more details:

 

These solutions and others are covered in the 'Getting Started and Troubleshooting Guide'... also covered is how to manually input your axes and keybindings for your joystick... which is what you should try if you are still having problems. 

 

Your issue is not one we haven't seen before... and the solutions can usually be found in the Guide.

[Florida]Florida1146
Posted (edited)
13 hours ago, Buzzsaw said:

Where is the documents folder?

My Documents folder is at C:/Users/gpbarth/Documents. 

Curiously enough, I found - C:/Users/gpbarth/Documents/1CSoftClub/il-2sturmovich cliffs of dover

And in it I found the confUser.ini file that has the profile I seem to have set up with my controllers:

[BOB]
  hotkeys = HotKey BOB
  difficulty=512163071
  lastSingleMiss=missions/Single/Bomber Intercept - Ships.mis

[HotKey BOB]
S=static
Alt F4=exit
P=pause
L=land
Alt X=exit
PrintScreen=ScreenShot


[Config viewSet]
AzimutSpeed=0.1
TangageSpeed=0.1
LenSpeed=0.1
MinLen=1.0
DefaultLen=20.0
MaxLen=30000.0
Speed=6
Offset=2

[DashBoard]
0=1 153.600 0.000 0.600
1=1 870.400 0.000 0.600
2=1 0.000 281.600 0.500
3=1 0.000 153.600 0.500
4=1 0.000 409.600 0.500
5=1 870.400 153.600 0.600
6=1 870.400 307.200 0.600
7=1 716.800 0.000 0.600
8=1 0.000 0.000 0.600

[HotKey gui]
  Escape = activate
  MouseRight = popupmenu


[HotKey Console]
;BackQuote=Activate
Control Tab =Activate


[FreeFly]
MouseLeft=ResetView
A=Azimut-
D=Azimut+
S=Tangage+
W=Tangage-
Q=Kren-
E=Kren+
V=Speed+
C=Speed-

[FreeFly Config]
AzimutView=1.0
TangageView=1.0
SpeedAzimut=50.0
SpeedTangage=50.0
SpeedKren=50.0
MaxSpeed=1000.0
Acselerate=100.0

[HookViewFly Config]
timeFirstStep=2.0
deltaZ=10.0


[FreeFlyXYZ]
Left=Y+
Right=Y-
Down=X-
Up=X+
Home=Z+
End=Z-
Delete=A-
PageDown=A+
Control Left=SpeedMul
Control Right=SpeedMul
Control Down=SpeedMul
Control Up=SpeedMul
Control Home=SpeedMul
Control End=SpeedMul
Control Delete=SpeedMul
Control PageDown=SpeedMul

[FreeFlyXYZ Config]
SpeedXYZ=20.0
SpeedAzimut=20.0
SpeedMul=0.1


[HotKey artillery_gunner]
Up = GunUp
Down = GunDown
Right = GunRight
Left = GunLeft
Space = GunFire
S= StopMovement
M= StartMovement
F = FastTracking
T = FineTrackig

[Config pilotMove]
aileron=1 0.01 0.02
elevator=1 0.01 0.02
rudder=1 0.02 0
trimaileron=0 0
trimelevator=0 0
trimrudder=0 0
throttle=0.05 0.95 0.02 0.02 0.02
pitch=0 0
mix=0 0
compressor=0 0
oilradiator=0 0
radiator=0 0
flaps=0 0
underc=0 0
brakes=0 0
throttle0=0 0 0 0 0
throttle1=0 0 0 0 0
throttle2=0 0 0 0 0
throttle3=0 0 0 0 0
throttle4=0 0 0 0 0
throttle5=0 0 0 0 0
throttle6=0 0 0 0 0
throttle7=0 0 0 0 0
pitch0=0 0
pitch1=0 0
pitch2=0 0
pitch3=0 0
pitch4=0 0
pitch5=0 0
pitch6=0 0
pitch7=0 0
mix0=0 0
mix1=0 0
mix2=0 0
mix3=0 0
mix4=0 0
mix5=0 0
mix6=0 0
mix7=0 0
radiator0=0 0
radiator1=0 0
radiator2=0 0
radiator3=0 0
radiator4=0 0
radiator5=0 0
radiator6=0 0
radiator7=0 0
oilradiator0=0 0
compressor0=0 0
oilradiator1=0 0
compressor1=0 0
compressor2=0 0
oilradiator2=0 0
compressor3=0 0
oilradiator3=0 0
oilradiator4=0 0
compressor4=0 0
oilradiator5=0 0
compressor5=0 0
oilradiator6=0 0
compressor6=0 0
compressor7=0 0
oilradiator7=0 0
bombbaydoor=0 0
impellerretr=0 0
airbrake=0 0
carbheater=0 0
carbheater0=0 0
carbheater1=0 0
carbheater2=0 0
carbheater3=0 0
carbheater4=0 0
carbheater5=0 0
carbheater6=0 0
carbheater7=0 0
leslats=0 0
brakeslt=0 0
brakesrt=0 0
throttle_wep=0 0

[Config turretMove]
turretyaw=0.5 0 0
turretpitch=0.5 0 0

[HotKey vehicleDriver]
Control S=start_movement
Alt S=stop_movement
Control D=toggle_dir
Down=brake
Right=turn_right
Up=accelerate
Left=turn_left
Alt D=toggle_hand_brake

[HotKey vehicleGunner]
Space=gun_fire
[Config vehicleMove]
ower=0 0.9 0 0 0
power=0 0.9 0 0 0

[HotKey camposMouseXYZ]
MouseLeft=AT
MouseRight=XYZmove
F7=SpeedFast
F6=SpeedNormal
F5=SpeedSlow
F8 MouseLeft=Kmove

[LastFocus]
969305076=bExtras
-1332861808=bStatistic
-1137074434=bRealism
1899961994=bQuickMission
-372350066=bServer
628377810=training5
1862295808=bControls
2134622242=bBuilder
2084280354=bExtras

 

[HotKey pilotMove]
X56_H.O.T.A.S._Stick-E0071B89+AXE_X=1aileron   <----------------------- Is this No. 1?
X56_H.O.T.A.S._Stick-E0071B89+AXE_Y=1elevator
Saitek_Pro_Flight_Rudder_Pedals_(USB)-8C1CB5D+AXE_RZ=1rudder
Saitek_Pro_Flight_Rudder_Pedals_(USB)-8C1CB5D+AXE_X=1brakeslt
Saitek_Pro_Flight_Rudder_Pedals_(USB)-8C1CB5D+AXE_Y=1brakesrt
X56_H.O.T.A.S._Throttle-B0C339ED+AXE_V=1trimelevator
X56_H.O.T.A.S._Throttle-B0C339ED+AXE_U=1trimaileron
X56_H.O.T.A.S._Stick-E0071B89+AXE_RX=1trimrudder
X56_H.O.T.A.S._Throttle-B0C339ED+AXE_RZ=1throttle_wep
X56_H.O.T.A.S._Throttle-B0C339ED+AXE_Z=1pitch
X56_H.O.T.A.S._Throttle-B0C339ED+AXE_X=1throttle

 

[HotKey view]
Control F2=outsideViewNextEnemy
Control F1=toggleShowCabin
Y=padlockViewPrev
Alt F7=outsideViewEnemyDirectGround
U=padlockViewNext
Alt F6=outsideViewEnemyDirectAir
Alt F2=outside
Alt F1=inside
M=toggleShowMirror
C=nextCabin
Shift C=changeCabin
Control C=prevCabin
Alt 9=cabin9
Alt 8=cabin8
Alt 7=cabin7
Joystick2+Key3=padlockViewForward
Alt 6=cabin6
Alt 5=cabin5
Alt 4=cabin4
Alt 3=cabin3
F8=outsideViewFollow
Alt 2=cabin2
F7=outsideViewEnemyGround
Alt 1=cabin1
F6=outsideViewEnemyAir
F5=padlockViewGround
F4=padlockView
F3=outsideViewFly
F2=outsideView
Shift F7=outsideViewFriendGround
F1=insideView
Shift F6=outsideViewFriendAir
Shift F5=padlockViewFriendGround
Shift F4=padlockViewFriend
Shift F2=outsideViewNextPlane
X56_H.O.T.A.S._Throttle-B0C339ED+Key20=toggleAim

[HotKey viewSet]
Alt MouseLeft=DashBoard
End=fov70
PageDown=fov90
Delete=fov30
Mouse5=FOV
MouseMiddle=Rotate
F10=StartStop
MouseRight=Len
MouseLeft=Offset
NumPad/=Reset

[HotKey viewPan]
NumPad-4=PanLeft2
NumPad-3=PanRight3
NumPad-2=PanDown
NumPad-1=PanLeft3
Pov225 Joystick+Pov=PanLeft3
Pov270 Joystick+Pov=PanLeft2
Pov315 Joystick+Pov=PanLeft
Pov0 Joystick+Pov=PanUp
Pov45 Joystick+Pov=PanRight
Pov90 Joystick+Pov=PanRight2
Pov135 Joystick+Pov=PanRight3
NumPad-9=PanRight
NumPad-8=PanUp
Pov180 Joystick+Pov=PanDown
NumPad-7=PanLeft
NumPad-6=PanRight2
NumPad-5=PanReset

[HotKey viewSnap]
NumPad-4=Snap_m2_0
NumPad-3=Snap_3_0
NumPad-2=Snap_0_m2
NumPad-1=Snap_m3_0
Pov225 Joystick2+Pov=Snap_m3_0
Pov270 Joystick2+Pov=Snap_m2_0
Pov315 Joystick2+Pov=Snap_m1_0
Pov0 Joystick2+Pov=Snap_0_2
Pov45 Joystick2+Pov=Snap_1_0
Pov90 Joystick2+Pov=Snap_2_0
F9=SnapPanSwitch
Pov135 Joystick2+Pov=Snap_3_0
Pov180 Joystick2+Pov=Snap_0_m1
NumPad-9=Snap_1_0
NumPad-8=Snap_0_0
NumPad-7=Snap_m1_0
NumPad-6=Snap_2_0
NumPad-5=Snap_0_2

[HotKey timeSpeed]
CloseBracket=timeSpeedUp
OpenBracket=timeSpeedDown
Quote=timeSpeedNormal

[HotKey common]
O=door_open
Shift L=csec_lights
A=autopilot
Control O=door_close
Control L=cpri_lights
Control J=door_jettison
Control E=bailout
Alt L=cste_lights
MouseLeft=fire
Control Space=door_toggle

[HotKey pilot]
Z=rudder_leftx
X=rudder_rightx
W=thtl_110
Joystick+Key15=airbrake
Control NumPad-9=site_alt_plus
Shift BackQuote=engselect_all
Control NumPad-8=site_dist_plus
Control NumPad-7=site_spd_plus
Control NumPad-6=site_side_right
Control NumPad-5=site_auto
Control NumPad-4=site_side_left
Joystick2+Key0=trigger01
Control NumPad-3=site_alt_minus
Joystick+Key0=pitch_plus
Control NumPad-2=site_dist_minus
Control NumPad-1=site_spd_minus
I=enginei01
G=uc
Control T=thtl_slowcutout
Equals=thtl_plus
9=extinguisher
Control G=uc_down_emer
Shift 8=engselect_n7
Joystick+Key12 Joystick+Key18=autorudder_off
Shift 7=engselect_n6
Shift 6=engselect_n5
Control C=pilot_switch
Shift 5=engselect_n4
Shift 4=engselect_n3
Shift 3=engselect_n2
Shift 2=engselect_n1
Shift 1=engselect_n0
Down=elevator_downx
Right=aileron_rightx
Up=elevator_upx
Left=aileron_leftx
Control 7=rudder_leftx
Joystick+Key12 Joystick+Key17=autorudder_low
Joystick+Key12 Joystick+Key16=autorudder_high
Joystick1+Key3=trigger2
Joystick+Key3=pitch_mode_togl
MouseLeft=MouseControl
Underscore=thtl_minus
Joystick+Key2=pitch_minus
X56_H.O.T.A.S._Stick-E0071B89+Key0=trigger0
X56_H.O.T.A.S._Stick-E0071B89+Key2=trigger1
X56_H.O.T.A.S._Stick-E0071B89+Key5=wheelbrakex
X56_H.O.T.A.S._Stick-E0071B89+Key9=aileront_left
X56_H.O.T.A.S._Stick-E0071B89+Key7=aileront_right
X56_H.O.T.A.S._Stick-E0071B89+Key8=elevatort_nup
X56_H.O.T.A.S._Stick-E0071B89+Key6=elevatort_ndown
X56_H.O.T.A.S._Stick-E0071B89+Key13=ruddert_left
X56_H.O.T.A.S._Stick-E0071B89+Key11=ruddert_right
X56_H.O.T.A.S._Throttle-B0C339ED+Key27=landingflaps_u
X56_H.O.T.A.S._Throttle-B0C339ED+Key0=thtl_wep
X56_H.O.T.A.S._Throttle-B0C339ED+Key1=pitch_auto
X56_H.O.T.A.S._Throttle-B0C339ED+Key28=landingflaps_d
X56_H.O.T.A.S._Throttle-B0C339ED+Key4=uc_down
X56_H.O.T.A.S._Throttle-B0C339ED+Key3=uc_up
Pov180 X56_H.O.T.A.S._Stick-E0071B89+Pov=bombbaydoors
Pov0 X56_H.O.T.A.S._Stick-E0071B89+Pov=abwurf_arm
X56_H.O.T.A.S._Stick-E0071B89+Key1=trigger3
X56_H.O.T.A.S._Throttle-B0C339ED+Key5=thtl_psicutout
X56_H.O.T.A.S._Throttle-B0C339ED+Key7=rad_plus
X56_H.O.T.A.S._Throttle-B0C339ED+Key8=rad_minus
X56_H.O.T.A.S._Throttle-B0C339ED+Key6=rad_auto
X56_H.O.T.A.S._Throttle-B0C339ED+Key9=oilrad_plus
X56_H.O.T.A.S._Throttle-B0C339ED+Key10=oilrad_minus

[HotKey turret]
Control O=trt_park_toggle
Down=trt_mount_d
Right=trt_mount_r
Up=trt_mount_u
Left=trt_mount_l
Shift Down=trt_down
Shift Right=trt_right
Shift Up=trt_up
Shift Left=trt_left

[HotKey orders]
9=order9
8=order8
7=order7
6=order6
5=order5
4=order4
3=order3
2=order2
1=order1
0=order0
Escape=deactivate
Alt=select
Control=expand
Enter=Enter
Tab=activate
Backspace=Backspace

[HotKey vehicle]
Down=brake
Right=turn_right
Up=accelerate
Left=turn_left
Alt D=toggle_dir
Space=fire

[HotKey builder]
NumPad-4=stepAzimut-15
NumPad-3=stepAzimut30
NumPad-1=stepAzimut-30
NumPad-0=insert+
Alt MouseRight=select-
Alt MouseLeft=select+
Alt Control=unselect
A MouseLeft=battleArea
Control Z=Undo
Control Y=Redo
Control X=cut
Control V=paste
Insert=insert+
Control C=copy
Control B=addBranch
Home=change--
End=change++
PageDown=change+
PageUp=change-
Delete=delete+
MouseRight=popupmenu
F10=land
MouseLeft=objectMove
Shift MouseLeft=worldZoom
Enter=freeView
NumPad.=delete+
Tab=cursor
Backspace=cursor
Alt Right=Forward
Alt Left=Backward
NumPad-9=stepAzimut5
NumPad-8=resetTangage90
NumPad-7=stepAzimut-5
NumPad-6=stepAzimut15
Control MouseRight=delete+
NumPad-5=resetAngles
Control MouseLeft=insert+

[HotKey builderMouseXYZ]
F4 MouseRight=Zmove
F5 MouseLeft=Amove
Mouse5=Amove
MouseRight=XYmove
MouseLeft=Len
F6 MouseLeft=Tmove
F3=SpeedFast
F2=SpeedNormal
F1=SpeedSlow
F7 MouseLeft=Kmove

[ChatWindow]
0:-1=-posSize '0.003 0.870 0.206 0.130' -titleStr "Motor Controls" -alpha 130 -ualpha 0 -wrap -history 100
0:262144=-lay 1 -fnt 0 -clr 0
1:-1=-posSize '0.818 0.543 0.181 0.145' -titleStr "Secondary Controls" -alpha 130 -ualpha 0 -history 10 -timeout 15
1:5=-font 0
1:4=-font 0
1:7=-font 0
2:-1=-posSize '0.002 0.000 0.460 0.186' -titleStr "Info. Window 1" -alpha 130 -ualpha 0 -vscroll -wrap -history 100
2:393216=-fnt 0 -clr 54 -al 2 -tf 1 -sz 1 -sl 1
2:3=-font 0
2:131072=0
2:1=-font 0
2:6=-font 0
3:-1=-posSize '0.518 0.002 0.418 0.275' -titleStr Voice -border -alpha 130 -ualpha 0 -wrap -history 40 -timeout 30
3:2=-font 1
4:-1=-posSize '0.171 0.323 0.687 0.352' -titleStr NetStats -title -border -alpha 50 -ualpha 0 -custom
4:-2=-font 3 -color 139 -columnWidth '0.100 0.183 0.322 0.144 0.093 0.081' -columnSort 2

 

Sorry for the entire INI file, but I thought you'd like to see all of it.
 

Also, have you checked to see if Windows is numbering your joystick and other peripherals incorrectly?  Your joystick should be #1. 

See my note in the INI file above.

 

Make sure Windows is not allowed to turn off the power to the USB connections to your joystick and peripherals.

Did that some time ago.

 

Make sure Steam is not allowing "Generic Gamepad Support"... see the link below for more details:

Also did that within Steam.

 

These solutions and others are covered in the 'Getting Started and Troubleshooting Guide'... also covered is how to manually input your axes and keybindings for your joystick... which is what you should try if you are still having problems. 

I have a powered USB hub, and I also have the following controllers: Logitech X-56 HOTAS, Honeycomb Bravo Throttle Quadrant, Razer OrbWeaver, Thrustmaster Cougar MDFs (3), Logitech rudder pedals, and a generic XBox controller.

 I also run vJoy, so I'm not too sure I want to run yet another joystick emulation app.

 

What I'd like to know is why is there another confUser.ini file in the ...steamapps/common/IL-2Sturmovich Cliffs of Dover Blitz folder? And why my app is not using the correct one (see above) when I launch the game.

 

Also starting on page 21 of your guide, it says that all I have to do is double-click on the Command field and then use my controller to bind the new assignment. When I open CODB and open the Controls Option screen/Axes, there are already (wrong) assignments for my joysticks, and they will NOT clear. I cannot change them.

 

Seems to me, going through the INI files in my Documents folder that CODB is looking in the wrong place for these files. It certainly isn't looking here.

Can I delete the confUser.ini file and let CODB rebuild it? And if so, which one?

Edited by [Florida]Florida1146
  • Team Fusion
Posted
8 hours ago, [Florida]Florida1146 said:

 

Seems to me, going through the INI files in my Documents folder that CODB is looking in the wrong place for these files. It certainly isn't looking here.

Can I delete the confUser.ini file and let CODB rebuild it? And if so, which one?

Yes, this multiple Documents folders is a problem which has occurred with others when using the game... there is a post about it on these forums in this Technical Assistance section if I am not mistaken.

 

I can't find it right now, but you might want to do a search for it as there is a for a solution to your problem noted there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...