MaxSbaraglia Posted October 20, 2018 Posted October 20, 2018 (edited) Brief description: Train fell from a bridge I've previously bombed, then wagons start to fly Detailed description, conditions: I was practicing my bombing skill in a quick mission sortie flying a 109. I bombed succesfully the bridge in front of it, but when it arrived its locomotive fell down in water as expected, wagons started to flying all around. It never happened anymore when I restarted the sortie. I'm sorry, I don't remember the map. EDIT: I forgot to say the version: it was the 3.005 Additional assets: I uploaded on youtube a 47 sec video PC config data:I run Il2 on a machine equipped with Austek Maximus VII Hero, I5 4690K, 16Gb DDR3, GTX 1070. Running under Win10 Home 64 Edited October 20, 2018 by MaxSbaraglia 2
Redglyph Posted November 1, 2018 Posted November 1, 2018 (edited) Note: the forums merged my two posts below, nothing I can do about that... Brief description: - Quick missions start on runway, even though "1000 m" is specified Detailed description, conditions: - starting a quick mission from the menu, multiple aircraft agains multiple aircraft - the start is done on the runway instead, while the enemy is already in the air and gets an advantage - reproducible every time, does not seem to depend on the selected starting point EDIT: some altitudes seem to work, if you select that on the allies (left) panel, so for example selecting "start" at "900 m" was fine in my last test Additional assets (videos, screenshots, logs): - see screenshot of mission launch (other issue: screenshots are BMP files, not JPEG), shows the conditions and the selected starting point Your PC config data (OS, drivers, specific software): - 3.006 - Win 7 x64 Note: "brief description" in bold, due to bug in forum system Brief description: Grey screen when back in "Headquarters" page Detailed description, conditions: - select existing career campaign - start mission - abort mission - on the planning page, select "show map" => grey page instead of map showing the flights for that mission Additional assets (videos, screenshots, logs): - screenshot Your PC config data (OS, drivers, specific software): - 3.006 - win 7 x64 Note: bold characters in description above due to bug in forum system Note: JPEG image provided, screenshots are forced to .bmp files but can't be uploaded here Edited November 1, 2018 by Redglyph additional info
Redglyph Posted November 1, 2018 Posted November 1, 2018 (edited) Brief description: Call signs are not shown in the briefing, other flights with other call signs are not shown either Detailed description, conditions: - campaign career mode - the call signs are never indicated, the user doesn't know his or his wingmen's. - the briefing only shows the pilot's mission, not the other missions occurring at the same time, he cannot have any awareness of what is currently going on in the sky - this is a problem for radio messages, because the user doesn't know who they are addressed to Additional assets (videos, screenshots, logs): - screenshot of briefing Your PC config data (OS, drivers, specific software): - 3.006 - win 7 x64 Edited November 1, 2018 by Redglyph additional info 1
[CPT]Pike*HarryM Posted November 4, 2018 Posted November 4, 2018 Brief description: Error loading genned mission (Campaign Kuban P-39 16GvIAP) (attached ZIP file with mission) Detailed description, conditions: Got black screen when mission tried to load. Tabbing out could see error message "Error loading model graphics/planes/yak1s127/yak1s127.mgm" Additional assets (videos, screenshots, logs): Your PC config data (OS, drivers, specific software): Yes, I know I need to update driver though this is not super old. GennedMission.zip
Martin077 Posted November 13, 2018 Posted November 13, 2018 Brief description: German Front Flying Clasps counts wrongDetailed description, conditions: The progress count for missions should be all missions flown, no matter if sucessfull or unsucessfullAdditional assets (videos, screenshots, logs): noneYour PC config data (OS, drivers, specific software): V3.006
Taxman Posted November 17, 2018 Posted November 17, 2018 (edited) On 11/3/2018 at 10:20 PM, [CPT]Pike*HarryM said: Brief description: Error loading genned mission (Campaign Kuban P-39 16GvIAP) (attached ZIP file with mission) Detailed description, conditions: Got black screen when mission tried to load. Tabbing out could see error message "Error loading model graphics/planes/yak1s127/yak1s127.mgm" Additional assets (videos, screenshots, logs): Your PC config data (OS, drivers, specific software): Yes, I know I need to update driver though this is not super old. GennedMission.zip Did you get it figured out? I also have the 1080Ti and 32 g ram Win. 7, and at times had the same problem. I now think I have that error under control, I disabled the music. Been playing the last 5 days without the black screen error on both career and PWCG campaigns, roughly 4 to 5 mission a day. Might be worth a try on the music. Edited November 17, 2018 by Taxman Added text
[CPT]Pike*HarryM Posted November 18, 2018 Posted November 18, 2018 I think I skipped it or started a new campaign to get around it, not sure what was wrong with the mission file.
yeikov Posted November 29, 2018 Posted November 29, 2018 (edited) Brief description: The date 1942.11.06 is missing weather conditions in the Stalingrad Career. Detailed description, conditions: When going to Nov 6th, 1942, all weather settings appear as zero. I checked the file scg\scripts\14conditions.cfg (extracted from .gtp files) and found that there is a typo, and instead of 1942.11.06 it is written 1942.11.05: Spoiler [Conditions] period="1942.11.04","1942.11.04" WType=2 WindPov=3 WindDir=150 CloudLevel=1000 PrecLevel=0 PrecType=0 Turbulence=0 TempPressLevel=0 Temperature=1 Pressure=759 SeaState = 2 [end] [Conditions] period="1942.11.05","1942.11.05" WType=1 WindPov=4 WindDir=220 CloudLevel=1200 PrecLevel=0 PrecType=0 Turbulence=0 TempPressLevel=0 Temperature=0 Pressure=767 SeaState = 2 [end] [Conditions] period="1942.11.05","1942.11.05" WType=2 WindPov=7 WindDir=230 CloudLevel=800 PrecLevel=0 PrecType=0 Turbulence=0 TempPressLevel=0 Temperature=0 Pressure=759 SeaState = 2 [end] [Conditions] period="1942.11.07","1942.11.07" WType=2 WindPov=6 WindDir=130 CloudLevel=1100 PrecLevel=0 PrecType=0 Turbulence=0 TempPressLevel=0 Temperature=3 Pressure=758 SeaState = 2 [end] Additional assets: See screenshot below. Your PC config data (OS, drivers, specific software): V3.007 Edited November 30, 2018 by yeikov
RoadrunnerKiwispirits Posted December 6, 2018 Posted December 6, 2018 Brief description: AI starts under mountains and presumably self destructs Detailed description, conditions: In a quick mission I accidentally set AI start altitude at 300m in mountainous terrain. AI planes never appeared, presumably they crashed inside the mountains. Silly thing for me to do but perhaps there is a way of avoiding this? My player altitude was 3000m Additional assets (videos, screenshots, logs): Your PC config data (OS, drivers, specific software):Windows 10, Nvidia 1080, latest drivers for everything, HTC Vive VR
gemanuel1 Posted December 15, 2018 Posted December 15, 2018 (edited) Brief description: Can't prolong my career from Stalingrad to Kuban. Detailed description, conditions: I started my career with the Germans at Moscow and have been playing for 100+ hours. I just finished Stalingrad and was about to prolong to Kuban but the page is just blank, I can't prolong the career and i can't pick the geschwadmer or anything like when i start a new career. I have tried to turn on and off the game, computer and i have been trying to uninstall Kuban and reinstall it but it is still blank and i can't prolong it. Additional assets (videos, screenshots, logs):Your PC config data (OS, drivers, specific software): Windows 10, Nvidia 970, latest drivers for everything Edited December 15, 2018 by gemanuel1
Adj Posted December 28, 2018 Posted December 28, 2018 (edited) Brief description playing new career, BOM IV/JG 52, free hunt mission, no ending. Detailed description Planes circle the action point no contacts made, the planes keep circling until fuel is low (ten minute warning). I fly back to occupied territory and cancel the mission: to end it before running out of fuel over enemy territory. My squad mate seems to survive, although he still seems to be circling over enemy territory when i check. This has occurred twice in this career. Edited December 28, 2018 by Adj
Solmyr Posted December 29, 2018 Posted December 29, 2018 (edited) Brief description: In Moscow career mode, mission is to bomb in allied territory. Detailed description, conditions: After 50+ sorties in my fighter pilot career for VVS, early december '41, "Counter offensive" chapter I believe, my flight is requested to escort our bombers who are going to bomb our own territory. Happened twice in 2 or 3 days.. I'm afraid that it now could happen regularly so. Additional assets (videos, screenshots, logs): Your PC config data (OS, drivers, specific software): In signature. Edited December 29, 2018 by Solmyr
airahusky Posted December 29, 2018 Posted December 29, 2018 10 часов назад, Adj сказал: Brief description playing new career, BOM IV/JG 52, free hunt mission, no ending. Detailed description Planes circle the action point no contacts made, the planes keep circling until fuel is low (ten minute warning). I fly back to occupied territory and cancel the mission: to end it before running out of fuel over enemy territory. My squad mate seems to survive, although he still seems to be circling over enemy territory when i check. This has occurred twice in this career. We will try to find a mistake. In such cases, it is easier for us to find an error if you attach a file with a mission (_gen.mission in data folder) 4 часа назад, Solmyr сказал: Brief description: In Moscow career mode, mission is to bomb in allied territory. Fixed 1
1CGS LukeFF Posted December 29, 2018 1CGS Posted December 29, 2018 12 hours ago, airahusky said: We will try to find a mistake. In such cases, it is easier for us to find an error if you attach a file with a mission (_gen.mission in data folder) I've posted a mission showing this problem in the internal testing forum.
MarcoPegase44 Posted December 30, 2018 Posted December 30, 2018 Career mod Stalingrad and Kuban. 1 °) Problem with the AI formations of JU 87. Since these last patches, when I make a career listed Russian, the formations of JU 87 in mission of interception of bombers do not pose a pb, the formations of Ju87 are complete. In the interceptions of ground attacks, however, I meet one or two isolated JU87 escorted by 2 or 4 BF109, it is not realistic the JU87 should be in formation of 6 to 12 aircraft approximately, as for the bombers missions. 2 °) In mission of interception of bombers AI I meet JU87 but never formation of HE111 and JU 88 ... where as these at the beginning of the campaign of Stalingrad bombarded many times the city and the passages of the Volga. It's a historic lack 3 °) I never meet AI training of BF 110 and P 40.
Dutchvdm Posted January 10, 2019 Posted January 10, 2019 Hi Guys, Wanted to report my first bug here. With both the bomber intercept mission's and the intercept recon plane the sims starts to stutter heavily as soon as location's updates are shown on the map. This only happens when the enemy spawns the A-20 bomber. Happened in my Stalingrad and Kuban career playing on the Axis side. Grt M
HeavyCavalrySgt Posted February 6, 2019 Posted February 6, 2019 Brief description: Missions won't end Detailed description, conditions: After successfully completing a mission, land back at base and "Finish mission". There is a slow camera pan bakc, then a view change to something random and the game will just sit for 12+ hours without ever getting to the debriefing screen. Additional assets (videos, screenshots, logs): Your PC config data (OS, drivers, specific software): DxDiag.txt This happens very frequently - if I end the game's processes I will be able to fly and refly this same mission over and over, but it will never progress to the next mission. I have had far more careers end this way than by getting shot down. Sometimes it happens on the first mission of a new career and sometimes several missions in. I have tried the 'fix broken career" technique - it does move the day forward, but any missions I fly will still hang after landing.
Tony_Kito Posted February 14, 2019 Posted February 14, 2019 Brief description: Rail bridge southwest of Rzhev on Moscow map seems displaced Detailed description, conditions: Played on both Career and Scripted Campaign modes, the railway bridge southwest of Rzhev (Grid 1105.7) seems to be dislocated upwards from its path. I don't know if this is a realistic design, maybe it moves vertically up and down, but looking at it gives the impression that it's not placed correctly. Additional assets (videos, screenshots, logs): Your PC config data (OS, drivers, specific software): N/A
Ghost666 Posted February 15, 2019 Posted February 15, 2019 Dose look a little out of place. The NWP relay and the approach relays in the signal system should place the signals governing movement over the raised bridge to red.?
Yardstick Posted February 16, 2019 Posted February 16, 2019 Brief description: Aircraft parked next to blast pen, engine off, a ground crew walks into stationary propeller and dies - pilot 'shot for war crimes'! Detailed description, conditions: Completed a mission Kuban carer mission, landed, parked up and shut down engine. I was watching the AI dogfighting elsewhere on the map, when I saw a techchat message saying my engine was damaged. Returned to an exterior view of my aircraft to find a ground crew lying dead in front of it. On exiting the mission my 750+ kill ace was executed for war crimes - really! Obviously an unintended consequence of the ground crew now being able to be killed but completely ridiculous. No biggy for me as I had backed up the cp.db file the mission before and can edit the file if need be but would be very frustrating if I had not backed-up recently.
Jade_Monkey Posted February 17, 2019 Posted February 17, 2019 Brief description: AI La-5 fail to start up the engine multiple timesDetailed description: conditions: On a user made SP mission, the AI attempts to start up the engine multiple times and fails 2-5 times. So far i have seen it with the La-5 plane.Additional assets (videos, screenshots, logs): See mission attached La5 startup failure.zip
JG26_Jobbo_Fett Posted February 17, 2019 Posted February 17, 2019 (edited) Brief description: Pilot Executed For Treason Due To Ground Crew Walking Into Landed AircraftDetailed description, conditions: After successful mission in dynamic campaign, pilot landed at airfield and parked aircraft in open bay. After some time, NPCs spawned in airfield + now occupied bay and walked into properly of said landed craft (Il-2). At mission completion, Player treated with "Pilot Executed for Treason" message, killing the campaign. Additional assets (videos, screenshots, logs): Can provide full video of mission if required by developers. Your PC config data (OS, drivers, specific software): Edited February 17, 2019 by JG26_Jobbo_Fett 3
schurem Posted February 17, 2019 Posted February 17, 2019 Brief description: fighter relocation flight keeps circling. Detailed description, conditions: at the end of a phase of the Moskva campaign, my squadron was being relocated to внуково. I was in the number 4 position. We took off, but about 30km away from the first waypoint lead started circling. He flew straight for a bit after making these weird circles and then did it again. These long A to B flights are boring enough without these weird AI bugs. I flew to the new airfield, landed and was dinged with a "mission failed".
SCG_Slater Posted March 31, 2019 Posted March 31, 2019 (edited) Brief description: When starting a tank crew quick mission the program freezeDetailed description, conditions: Logging in, starting a quick mission with tank crew, selecting a tank (any tank mission area) on the map (any map), and start mission, program freeze. Edit: I just tried to start any mission with planes, and nothing seems to run, this happened after I updated with the latest update.Your PC config data (OS, drivers, specific software):Brief description: Edited March 31, 2019 by Slater
MarcoPegase44 Posted June 14, 2019 Posted June 14, 2019 Brief description: Unit missing in. carrer mod When I extracted the SCG folder with the unGTP-IL2 utility I find in the file "squadrons2" of the 15 folder for the Kuban campaign units like "15.(kroat.)/JG 52" that do not appear on the map of the Kuban campaign. Sample of file"squadrons2" open with notepad: " [Squadron=201952] type=1 // 0 - common, 1 - fighter, 2 - bomber, 3 - recon, 4 - transport, 5 - attack [period] // Chapter 1 period="1943.04.18","1943.04.28" name="15.(kroat.)/JG 52" fl_day_st="00.00" fl_day_end="00.00" airfield="Kerch-2" quantity=12 flights=4 plane="LuaScripts\WorldObjects\Planes\Bf109G2.txt" [end] [period] // Chapter 2 period="1943.04.29","1943.05.25" name="15.(kroat.)/JG 52" fl_day_st="00.00" fl_day_end="00.00" airfield="Kerch-2" quantity=12 flights=4 plane="LuaScripts\WorldObjects\Planes\Bf109G2.txt" [end] [period] // Chapter 3 period="1943.05.26","1943.06.07" name="15.(kroat.)/JG 52" fl_day_st="00.00" fl_day_end="00.00" airfield="Kerch-2" quantity=12 flights=4 plane="LuaScripts\WorldObjects\Planes\Bf109G2.txt" [end] [period] // Chapter 4 period="1943.06.08","1943.06.20" name="15.(kroat.)/JG 52" fl_day_st="00.00" fl_day_end="00.00" airfield="Kerch-2" quantity=12 flights=4 plane="LuaScripts\WorldObjects\Planes\Bf109G2.txt" [end] [end] [Squadron=201442] type=5 // 0 - common, 1 - fighter, 2 - bomber, 3 - recon, 4 - transport, 5 - attack [period] // Chapter 2 period="1943.05.06","1943.05.25" name="4.(Pz)/Sch.G 2" fl_day_st="00.00" fl_day_end="00.00" airfield="Kerch-2" quantity=12 flights=4 plane="LuaScripts\WorldObjects\Planes\Hs129B2.txt" [end] [period] // Chapter 3 period="1943.05.26","1943.06.05" name="4.(Pz)/Sch.G 2" fl_day_st="00.00" fl_day_end="00.00" airfield="Kerch-2" quantity=12 flights=4 plane="LuaScripts\WorldObjects\Planes\Hs129B2.txt" [end] [end] [Squadron=201951] type=5 // 0 - common, 1 - fighter, 2 - bomber, 3 - recon, 4 - transport, 5 - attack [period] // Chapter 2 period="1943.05.06","1943.05.25" name="Pz.Jg.St./JG 51" fl_day_st="00.00" fl_day_end="00.00" airfield="Kerch-2" quantity=12 flights=4 plane="LuaScripts\WorldObjects\Planes\Hs129B2.txt" [end] [period] // Chapter 3 period="1943.05.26","1943.06.05" name="Pz.Jg.St./JG 51" fl_day_st="00.00" fl_day_end="00.00" airfield="Kerch-2" quantity=12 flights=4 plane="LuaScripts\WorldObjects\Planes\Hs129B2.txt" [end] [end] [Squadron=201977] type=2 // 0 - common, 1 - fighter, 2 - bomber, 3 - recon, 4 - transport, 5 - attack [period] // Chapter 1 period="1943.04.17","1943.04.28" name="III./St.G 77" fl_day_st="00.00" fl_day_end="00.00" airfield="Kerch-2" quantity=12 flights=4 plane="LuaScripts\WorldObjects\Planes\Ju87D3.txt" [end] [period] // Chapter 2 period="1943.04.29","1943.04.30" name="III./St.G 77" fl_day_st="00.00" fl_day_end="00.00" airfield="Kerch-2" quantity=12 flights=4 plane="LuaScripts\WorldObjects\Planes\Ju87D3.txt" [end] [end] [Squadron=201123] type=2 // 0 - common, 1 - fighter, 2 - bomber, 3 - recon, 4 - transport, 5 - attack [period] // Chapter 1 period="1943.04.17","1943.04.28" name="V.Kdo f.P.B." fl_day_st="00.00" fl_day_end="00.00" airfield="Kerch-2" quantity=12 flights=4 plane="LuaScripts\WorldObjects\Planes\Ju87D3.txt" [end] [period] // Chapter 2 period="1943.04.29","1943.05.25" name="V.Kdo f.P.B." fl_day_st="00.00" fl_day_end="00.00" airfield="Kerch-2" quantity=12 flights=4 plane="LuaScripts\WorldObjects\Planes\Ju87D3.txt" [end] [period] // Chapter 3 period="1943.05.26","1943.06.07" name="V.Kdo f.P.B." fl_day_st="00.00" fl_day_end="00.00" airfield="Kerch-2" quantity=12 flights=4 plane="LuaScripts\WorldObjects\Planes\Ju87D3.txt" [end] [end] "Some units may not be activated in the headquaters map of Kuban Campaign when launching a MODCARRER campaignIt's the case for "15.(kroat.)/JG 52" "Pz.Jg.St./JG 51" "V.Kdo f.P.B." And others units
1CGS LukeFF Posted June 14, 2019 1CGS Posted June 14, 2019 3 hours ago, MarcoPegase44 said: When I extracted the SCG folder with the unGTP-IL2 utility I find in the file "squadrons2" of the 15 folder for the Kuban campaign units like "15.(kroat.)/JG 52" that do not appear on the map of the Kuban campaign. That's because the unit doesn't fit anywhere for career mode. It was probably created before full research on its history was done.
MarcoPegase44 Posted June 14, 2019 Posted June 14, 2019 (edited) On March 30, 1943, the 15th (Kroat) / JG52 was sent to the Kuban front on Kerch aerodrome then Taman and engaged until the summer of 1943.It's the same for the other squadrons that I quoted, besides they have been saved as well in the file "squadron2", it should therefore be activated in the mod career Edited June 14, 2019 by MarcoPegase44
Vendigo Posted June 15, 2019 Posted June 15, 2019 Brief description: the runway lights don't work after updating! Detailed description, conditions: in my mission where the lights illuminate the runway after sunset it was working properly until recent update, now the lights don't work. The command to trigger the lights is "ForceComplete" with "Low" priority, object linked to the light entities, it seems not working any more.
xac2 Posted October 2, 2019 Posted October 2, 2019 Brief description:In quick missions unable to select Flying Circus aircraft for either self or opponents Detailed description, conditions: I have both Tank Crew and FC and have confirmed that I can select tanks for missions but am unable to select any FC planes. When attempting to select a vehicle it pops up with the window to choose a side either Entente or Central Powers and selecting either brings up the appropriate aircraft but clicking on any plane closes the selection window and leaves the plane selection on "none." Attempting to start the mission anyways results in a message saying "Choose planes to proceed."
TheSublimeGoose Posted November 8, 2019 Posted November 8, 2019 (edited) Brief Description: Within BoBp ‘Career Mode,’ static aircraft are invulnerable to gunfire. Detailed Description: As of the BoBp/FC finalization update, static aircraft (e.g. aircraft at airfields) are impervious to all calibers of MG and cannon fire. I have attempted to destroy German (static) aircraft as an American, and vice-versa, with no luck. Edited November 8, 2019 by KotwicaGoose Typo
Grancesc Posted November 11, 2019 Posted November 11, 2019 Brief description: In BoBP carrer mode fighter bombers indestructible.Detailed description, conditions: Fighter bombers e.g.P-47 are often but not always indestructible on their return flight to the base or in their landing approach. You can fire (and hit) all your 20 and 30mm ammo at the target without effect. The number of hits or the size of gun caliber do not matter. Damage decals are not displayed.Additional assets (videos, screenshots, logs): noneYour PC config data (OS, drivers, specific software): IL- Software V 4.001b i7 7700k @ 4.8GHz / 32GB Corsair LPX @ 3200 MHz / MSI Z270 Gaming Pro / Gigabyte GTX 1080 G1 / Display: ASUS VG278HE 144 Hz / Samsung SSD 850 Pro 512 GB / WD Red HDD 2.0 TB / Peripherals: HOTAS VKB Gunfighter joystick + Warthog throttle / MFG Pedals / Saitec throttle Quadrant / TrackIr5 OS: Windows 10 64bit 1
RavN_Sone Posted November 11, 2019 Posted November 11, 2019 Brief description: Bodenplatte career doesn't rotate wounded/killed pilots out of planned sorties Detailed description, conditions: No.127 RAF squadron, game crashes; reference screenshot in post quoted below Additional assets (videos, screenshots, logs): 1
Sgt_Joch Posted November 16, 2019 Posted November 16, 2019 brief description: trees block runway at Florennes air base. detailed description: on the western edge of the main runway with a 270-90 heading, there are several trees which are in the way when landing from the west. They should be removed. 1
Sandinourcoffee6 Posted November 16, 2019 Posted November 16, 2019 trains and ships in QMB do not fire anymore!!
69th_Mobile_BBQ Posted November 21, 2019 Posted November 21, 2019 Bug: Selecting Random Central Powers Plane spawns WW2 era planes from either side. First try spawned a He111 H.6 and a Bf109 E7. Second try spawned a Pe-2 Ser.87. Flying Circus > QMB Map selected: Arras Plane selected: Spad > unlimited ammo > balloon guns Enemy selected: Random Central Powers plane > frequency: until ammo runs out.
Redglyph Posted November 21, 2019 Posted November 21, 2019 Brief description: flight name not mentioned in briefing Detailed description, conditions: In the career campaigns, the flight name is not mentioned in the briefing, so when the tower or wingmen talk over the radio, it is not possible to know whether the messages are intended for the user's flight or not. Additional assets (videos, screenshots, logs): (I can't attach the screenshot) Your PC config data (OS, drivers, specific software): IL-2 version 4.001 On 11/16/2019 at 2:46 PM, Sgt_Joch said: brief description: trees block runway at Florennes air base. detailed description: on the western edge of the main runway with a 270-90 heading, there are several trees which are in the way when landing from the west. They should be removed. That should probably be in the Graphics, models and maps forum. Indeed, there are a lot of issues on the Rhineland map with the different layers, I think it's still early WIP.
Oyster_KAI Posted December 2, 2019 Posted December 2, 2019 (edited) Brief description: In BOK career mode, the last day of campaign, there is a mission we can't proceed.Detailed description, conditions: see the map, waypoint 3 is out of the combat zone. (River cross cover mission)Additional assets (videos, screenshots, logs): Your PC config data (OS, drivers, specific software): win7 64bit , i7 4790K, 24GB RAM, GTX1060 6G Edited December 2, 2019 by Oyster_KAI
Grancesc Posted December 5, 2019 Posted December 5, 2019 Brief description: Crash to desktop in BoBP carrer mode.Detailed description, conditions: The mission itself runs normaly. In the Mission Results Screen, all scores are correctly listed and mission rated as "accomplished". But as soon as you press the green button "Finished" in this screen, the simulation crashes to the desktop screen. The results achieved in this mission are not counted when restarting the sim. Such crashes do not always happen but occasionally. Additional assets (videos, screenshots, logs): gen.mission fileYour PC config data (OS, drivers, specific software): IL- Software V 4.002 i7 7700k @ 4.8GHz / 32GB Corsair LPX @ 3200 MHz / MSI Z270 Gaming Pro / Gigabyte GTX 1080 G1 / Display: ASUS VG278HE 144 Hz / Samsung SSD 850 Pro 512 GB / WD Red HDD 2.0 TB / Peripherals: HOTAS VKB Gunfighter joystick + Warthog throttle / MFG Pedals / Saitec throttle Quadrant / TrackIr5 OS: Windows 10 64bit _gen.zip
senseispcc Posted December 15, 2019 Posted December 15, 2019 (edited) An annoying bug. I have a Tempest campaign going and my last mission is a "escort the bombers" one that did go nicely until the bomber and their escort "us" did go over the target and from there more and more into enemy territory without turning home or coming back to the mission primary objective. I landed and waited for a moment and end the mission... but then the game crashed...and it was like the mission never happened. I have the incomple recording of this mission but it is to but tto put with this post. I did the mission again and same thing happeng again but this time the game did not crash when I did leave the mission and I can continue my campaign. Note: none of the planes in the mission were lost!!! Edited December 15, 2019 by senseispcc trying to add file
technic Posted December 17, 2019 Posted December 17, 2019 The same problem here. AI aircraft do not follow the mission plan and fly around the map without any understandable plan (please see attached record of my flight, when flying carrier mission "escort the bombers" in Tempest carrier). Note original mission plan and green path of my aircraft. I have landed after 1h 17 min and the bombers and escort Tempests still fly somewhere above enemy territory …. Very strange, never see that in BOS, BOM and BOK carrirer missions…. 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now