IL-2 randomly changes camera in vr

[rapidhearts]

I reckon this would be my 5th time starting this mission in vr and it has happened in other missions as well. For some reason i'll be flying along fine and then all of a sudden i have the camera view looking out along the wing! I am using a hotas and being in  vr i have disabled all head movement and camera controls from settings but it still keeps happening and am frustrated. If i have to start this mission again due to this problem i'll just uninstall it and forget about it.

 

Any help or advice greatly appreciated

 

Thanks

[RedKestrel]

20 minutes ago, rapidhearts said:

I reckon this would be my 5th time starting this mission in vr and it has happened in other missions as well. For some reason i'll be flying along fine and then all of a sudden i have the camera view looking out along the wing! I am using a hotas and being in  vr i have disabled all head movement and camera controls from settings but it still keeps happening and am frustrated. If i have to start this mission again due to this problem i'll just uninstall it and forget about it.

 

Any help or advice greatly appreciated

 

Thanks

Do you have any keys accidentally bound to snap views in keybinding? Is it always the same wing and the same amount of head movement or is it random? Is your  headset having trouble maintaining centre? Do you have any mods installed or anything like that?

 

might be a good idea to post this in vr portion of hardware forum as well to see if others have this issue, lots of experienced and knowledgeable VR users here. I’m just a screen pleb.

Edited August 25, 2020 by RedKestrel

[rapidhearts]

Just now, RedKestrel said:

Do you have any keys accidentally bound to snap views in keybinding? Is it always the same wing and the same amount of head movement or is it random? Is your  headset having trouble maintaining centre? Do you have any mods installed or anything like that?

 

might be a good idea to post this in vr portion of hardware forum as well to see if others have this issue, lots of experienced and knowledgeable car users here. I’m just a screen pleb.

ok thanks and i will do that. It is always the same wing and headset centers fine with no mods installed

 

[RedKestrel]

3 minutes ago, rapidhearts said:

ok thanks and i will do that. It is always the same wing and headset centers fine with no mods installed

 

Go through your keybind settings and make sure none of your stick buttons or keys are bound to camera views at all. That’s the only thing I can think of.

[Hartigan]

Default camera view reset should be keypad 5. Some wmr headsets needs enough room lighting. Your room might be too dark if you lose tracking while looking back

[dburne]

11 minutes ago, Hartigan said:

Default camera view reset should be keypad 5. Some wmr headsets needs enough room lighting. Your room might be too dark if you lose tracking while looking back

 

For those that prefer not to reach up and press keypad 5 whilst wearing a VR headset, one can easily assign that function to a button  on stick or throttle.

It is " Default VR View" under Pilot Head Control settings.

Same place you can also assign up to 5 levels of VR Z0om.