Help for Henschel engine starting

[I/JG53_Kurtz]

 

Hi all,

I have a big problem with engine starting in Henschel Hs-129. As I press E key engines start, but they don't remain running, they switch off after some seconds! I think problem is low mixture because mixture lever is always in stop position, BUT: I have no way to move it! I can not switch off auto mixture and set it to rich! The plane does not respond to my commands. Please help me!

 

Thank you very much!

 

Giovanni

Edited April 11, 2020 by I/JG53_Kurtz

[FlyingH]

Check your difficulty setting if you have set automatic mix. You should untick that to be able to move it manually. If you then want it in auto you just use the automix swich. (By the way do you try to put it to full rich BEFORE pressing the E key? When that is pressed you cannot so anything before the engine(s) have started)

[I/JG53_Kurtz]

I found the problem, my error in engine control mapping. Sorry.