"Formation" Command dramatically reduce speed

[GOA_Walter_Nowotny]

Hi devs:

In another post in "Mission Making and Mission Editor,", I commented that a formation of Me 262 did not fly at the speed indicated in the "Waypoint" command.
Finally testing and testing, I think the problem is the "formation" command.

The following was tested: (I follow in a separate plane)
- "V" Formation command of (4) Me 262 with Waypoint at 600kph at 4000m
- Right Edge Formation command of (4) Ju88 with waypoint at 400 kph at 4100m

In both cases, they begin the mission at the indicated speed but reduce it drastically. The Me 262 fly after reducing it, at  300 kph and with the flaps down (approximately 35% down)

The Ju88 fly at approximately 250kph tilted up slightly.

Second test:
The "wingmans of the formation" were eliminated and the Formation command was eliminated, leaving only the leading airplanes.
Result: both planes fly at the speed indicated in the waypoint.

This problem also occurs with the FW 190 D9 in some of my missions with "formation" command in my Langnase Dora  Campaign. A formation of 4 FW's with waypoint at 500kph, fly at 280-300 kph.

Finally, what I have to do is "build" a formation with independent airplanes and independent actions. Each with their respective waypoint. But it’s very slow to build the formation like this.

 

I added a Test Mission to check. This is with FW 190 A3. Waypoint at 500 kph. The 190 with formation command reduces speed to 420-440 kph. The lonely A3 set correct at 500 kph

 

Thanks, greetings from Chile

 

Test.rar

Edited August 13, 2019 by GOA_Walter_Nowotny
Add words