Make PE Bomb

[VII.Racetrack]

Guys at what altitude I should set the waypoint before triggering the Area Attack Command to let the Pe Planes Bomb an area? 

I see they Don't drop but A20 do with same settings...

[Gambit21]

I think you’re doing something wrong aside from waypoint alt.

 

Are you going for a dive bomb attack or level bomb? 

[VII.Racetrack]

3 hours ago, Gambit21 said:

I think you’re doing something wrong aside from waypoint alt.

 

Are you going for a dive bomb attack or level bomb? 

Level Bomb, I have 2 exaclty same group of trigger, command and objects.

 

The one with the A20 works fine and they level drop their bombs, the one of the Pe doesn't

[WWSitttingDuck]

Can not answer your question about altitude, but the distance between the waypoint that is going to trigger the command attack (set at attack ground, not ground objects) is a big factor.

It could be this distance is different for a PE2 vs an A20, but i use this as a rule of thumb:

 

The magic number for the distance between the last waypoint and the command attack area that waypoint is going to trigger for the bomber is around 1900m.  Anything less than that (give or take), and the bomber is going to veer off right as it gets to the attack area, and position itself for another run.  If you make that distance more then 2300m, I believe you will find the bombers will just continue in a straight line and do their drop.

[VII.Racetrack]

Okay so I move the waypoint way before the Attack Area and see what happens.

Thanks a lot