JonRedcorn Posted March 10, 2019 Posted March 10, 2019 Trying to fly online and I turn on the fuel cock, hit I and nothing happens, I've rebound I several times it is set to toggle all engines and nothing ever happens when I hit it, can't figure it out.
Dogbert1953 Posted March 10, 2019 Posted March 10, 2019 I only fly UK in CLOD. But with those types, you have to turn the magneto's on, as well as opening the fuel cock. Leave the rad shut until the engine warms up enough to taxi. I am no expert but it works for me. Mike.
BOO Posted March 10, 2019 Posted March 10, 2019 1 hour ago, JonRedcorn said: Trying to fly online and I turn on the fuel cock, hit I and nothing happens, I've rebound I several times it is set to toggle all engines and nothing ever happens when I hit it, can't figure it out. In the multis you need to select an engine then toggle it.
JonRedcorn Posted March 10, 2019 Author Posted March 10, 2019 Can I not fly certain aircraft on the servers or something? Cause I am doing everything right but the engine just won't even begin to turn over or anything. Trying to fly a 109.
DD_Arthur Posted March 10, 2019 Posted March 10, 2019 7 hours ago, JonRedcorn said: Trying to fly a 109. Have you given the fuel priming lever a couple of pumps before hitting I?
=FEW=Hauggy Posted March 10, 2019 Posted March 10, 2019 Everything is in there : https://www.theairtacticalassaultgroup.com/wiki/doku.php?id=flight_manuals
BOO Posted March 10, 2019 Posted March 10, 2019 Though id boot up Clod to see if i could help but first the shortcut and exe got dumped into an unrecvoerable vault by avast then the game game failed to verify and repair repeatedly via Steam. Little things that are probably easy to get around but obsticles notheless that shouldnt be there and prevent people from going further with what is still a very good game. As of now i have an extra 7gb free on my drive.
JonRedcorn Posted March 10, 2019 Author Posted March 10, 2019 Had the I key bound to the wrong toggle engines command, pretty dumb. Toggle all engines isn't the same as toggle engines.
Sokol1 Posted March 10, 2019 Posted March 10, 2019 (edited) 22 hours ago, Dogbert1953 said: I only fly UK in CLOD. But with those types, you have to turn the magneto's on, as well as opening the fuel cock. Turn ON magnets has no practical effect in CloD - is bugged and result just "cosmetic", leave then for "How start a plane" videos in Youtube. All required for start a engine in any plane in cloD is: Turn Fuel Cock ON (twin engines may have two Fuel Cock). Set throttle 10% open* Press and hold "Toggle select engine" key - default is "I" (i not L). After start do the usual, wait warm-up, open radiator, set propeller pitch, etc. * This 10% in some planes, e.g. Spitfire, Hurricane... mean anything between 0% and 20% - in fact a bit more, but make plane shake a lot. Thing is in some planes, e.g. Tiger Moth "10%" is between 9.9% and 10.1% - somewhat difficult to achieve with analog throttles, specially the models equipped with potentiometer - these wheel integrated in (3in1) joystick base, CH's and Saitek's throttles. Maybe better use the key for "Throttle 10%". Edited March 10, 2019 by Sokol1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now