thrustmaster T16000 M wont work

[adler_1]

hi

i bought the JS new today but the throttle wont work correctly , it goes from 100  to 0 and back only , calibration wont respond .  i i tried it in IL2 and all functions perfect . Is there anything special i must input in settings or files for it to work with  this sim ?

Edited September 29, 2018 by dog1

[SCG_ErwinP]

Go to Windows Control Panel, Printers and Devices and try to calibrate it.

[adler_1]

there is no calibrar in image 3 in my windows 7 ultimate 64 bit .it just says device working properly . 

[Thad]

I no longer have Win 7 but I think the controller calibration section will be found under the controllers properties section.

[adler_1]

found it , its right click on the controller and it opens up the calibration page . in the calibration windows all functions fine , go back to game and its the  same mess . why is it perfect in IL2 ?? i dont even have to calibrate there . i tried to assign other keys but same result . the key does accept the axis but wont calibrate and when you are lucky that it does when you go into the game it corrupts on start up . 

Edited September 29, 2018 by dog1

[Thad]

Try a different USP port for the joystick.

 

Make sure something isn't conflicting with the throttle within the IL2 keymapper. Ensure the joystick throttle is responding correctly in the IL2 keymapper. There is no reason the T16000m joystick throttle should not work properly unless it is physically defective.

 

Does it work correctly in another game?

[adler_1]

it works perfectly well in IL2 , i did state that above . i did not even have to calibrate . i have tried today using keys but the response is exactly the same .

Edited September 30, 2018 by dog1

[PadleWarrior]

Hello Thad and Co.

Running the script with the

T.A.R.G.E.T. Profile - T.16000M - il2 Stalingrad  via T.A.R.G.E.T GUI from the thrustmaster homepage. Game in STEAM. I can use throttle, pitch, yaw but many buttons do not work (like flap, gear etc.) I have disabled STEAM input in the STEAM configuration. How can I get all buttons mapped correctly? Regards, PadleWarrior

[jollyjack]

I had your Thrustmaster setup a year ago, but found TARGET unuseable then. Set up shop directly with IL2, also USBdeview and JoyID are useful tools.