Rudder Pedals refusing to operate?

[MigSu]

Hello guys, please i am experimenting suddenly some troubles with my Pedals -Thrustmaster TFRP Flight Rudder Pedals- mm not for so long i have this rudder, so are just like new, now they are not working on IL2, presenting this Warning avery time open the sim

  Never seen that before, ok,

Select  T-Pedals, ACCEPT  =  no working, 

Go to SETTINGS,   and

Just not detecting the pedal, nothing appear, nothing.

 

 Hardware malfunction? no because use it in Dirt Rally and run perfectly.

 

 Please guys, i have new planes crazy for fly it and now this 

 

 Regards

[-332FG-Gordon200]

I find you need to operate the rudder pedals full left then right before they are 'seen'.

I hope this helps.

[Seb71]

2 hours ago, MigSu said:

  Never seen that before

 

I got this when I replaced a joystick with another one (different model).

[MigSu]

29 minutes ago, Gordon200 said:

I find you need to operate the rudder pedals full left then right before they are 'seen'.

I hope this helps.

I tried, no man, no result. 

 

19 minutes ago, Seb71 said:

 

I got this when I replaced a joystick with another one (different model).

 How did you solved it?

[Seb71]

11 minutes ago, MigSu said:

How did you solved it?

In my case it worked as intended. It re-assigned the bindings from the old joystick (Logitech Extreme 3D Pro) to the new one (T.16000M). Because of the different button layouts, I had to make some manual adjustments, but it worked quite well on transferring the keybindings from the old stick to the new one.

 

Have you switched from using pedals without TARGET to using them with TARGET? Causing the game to detect them as a new device. If you did start using TARGET, check in joy.cpl that the "real" pedals are removed from there and replaced with the virtual device when you start TARGET. Sometimes this does not happen and that could be the cause of your issues.

Edited May 13, 2018 by Seb71

[MigSu]

15 hours ago, Seb71 said:

In my case it worked as intended. It re-assigned the bindings from the old joystick (Logitech Extreme 3D Pro) to the new one (T.16000M). Because of the different button layouts, I had to make some manual adjustments, but it worked quite well on transferring the keybindings from the old stick to the new one.

 

Have you switched from using pedals without TARGET to using them with TARGET? Causing the game to detect them as a new device. If you did start using TARGET, check in joy.cpl that the "real" pedals are removed from there and replaced with the virtual device when you start TARGET. Sometimes this does not happen and that could be the cause of your issues.

 I dont know if i was using previously with Target, and where can i check is in joy.cpl ?? how can i verify that??

[Sokol1]

1st - Assure that pedals are working OK for Windows - pre-condition for work in games.

Click in Windows Start and type joy.cpl in the box, hit ENTER.

In the Game Controllers window, select the pedal, click properties and test axes.

 

If are OK for Windows, in the game try assign in this way:

 

Move the rudder bar for for right and hold in this position, now click in the assignment for YAW, when the window open release the pedal.

If don't work try the same again, this time press and hold for left side.

 

If don't work, try renaming the folder "Input" folder in game folder data - this will erase all your assignment, but force the detection of controllers - joy, pedal... again.

 

 

Edited May 14, 2018 by Sokol1

[MigSu]

8 minutes ago, Sokol1 said:

1st - Assure that pedals are working OK for Windows - pre-contition for wokr in games.

Click in Windows Start and type joy.cpl in the box, hit ENTER.

In the Game Controllers windows, select the pedal, click properties and test.

 

If are OK for Windows, in game try assign in this way.

 

Move the rudder bar for for right and hold in this position, now click in the assignment for YAW, when the window open release the pedal.

If don't work try the same again, this time press and hold for left side.

 

If don't work, try renaming the folder "Input" folder in game folder data - this will erase all your assignment, but force the detection of controllers - joy, pedal... again.

 

 

 

 Did not work, so i'll try 

 

  - If don't work, try renaming the folder "Input" folder in game folder data - this will erase all your assignment, but force the detection of controllers - joy, pedal... again.

[MigSu]

Deleting "Input" folder, yes the only way have to reprogram all, but finally have the Pedals detected again.. Thanks Sokol, and other guys efforts