SCGSalty64 Posted May 1, 2018 Posted May 1, 2018 I don't know if this is a bug or not. When flying the G6 in auto prop mode, the plane will not take manual full throttle but will within a second or two decrease throttle setting to something less. When attempting to force the throttle back to full, it will again self correct by decreasing the throttle setting. It will not obey the manual input at all. If I switch to manual prop mode, then the throttle will stay as I manually input. Is this as it was programmed to be? Second, in manual prop mode, increasing to full pitch (i.e. 1230 on the clock) the text accompanying shows the exact opposite, i.e. it shows decreasing pitch. The text shows zero pitch but the clock shows 1230.
SCGSalty64 Posted May 2, 2018 Author Posted May 2, 2018 No response. Nobody has experienced this behavior from the G6 when you've flown it? Perhaps one of the developers could respond?
WheelwrightPL Posted May 2, 2018 Posted May 2, 2018 Check if you didn't bind your throttle key to some other function (like for example: decreasing RPM). Same with pitch.
Dakpilot Posted May 2, 2018 Posted May 2, 2018 Sounds like you are using assisted throttle and 'helper' is throttling back to combat power, from short use emergency power, try checking your realism settings Cheers, Dakpilot
SCGSalty64 Posted May 3, 2018 Author Posted May 3, 2018 Thanks for the response . This was in quick mission and I did have realism set to normal. It doesn't show you what normal settings are. I switched to custom and verified all the squares were unchecked. That was it. The throttle responds as it should now. Appreciate the heads up. However in manual prop mode there is a disconnect between the clock and the help text. They are not in sync.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now