RedVonD Posted April 5, 2018 Posted April 5, 2018 (edited) Don't know if anybody has run into this or not and couldnt find anything on the search. Have a Thrustmaster Warthog HOTAS setup with a T-rudder. It recognizes the x/y input for toe braking but there is nothing when it comes to the Z-axis for yaw setup (this is in IL2 only). I am not sure what to try next. Any help is appreciated. Edited April 5, 2018 by RedVonDike
dburne Posted April 5, 2018 Posted April 5, 2018 Only thing that comes to mind at first is make sure you are depressing each pedal the full length of the travel, sometimes it is finicky about registering properly if not.
RedVonD Posted April 5, 2018 Author Posted April 5, 2018 Pretty sure I have, I will try it again see if maybe I just didnt push hard enough
FlyingH Posted April 9, 2018 Posted April 9, 2018 Sometimes you need to move the pedals back and forth severel times (10 - 15) before it´s registered.
Sokol1 Posted April 9, 2018 Posted April 9, 2018 (edited) Move pedal for right and hold, go to assignment window, release the pedal. If dont work, try the same holding for left. Edited April 9, 2018 by Sokol1
RedVonD Posted April 10, 2018 Author Posted April 10, 2018 (edited) Found a solution, I ended up using the TARGET software to run the pedals only and it took care of it. All other games I use the controls on doesnt need this so must be just a optimization issue. Edited April 10, 2018 by RedVonDike
Recommended Posts