Sell Throttle GVL "Bf 109"

[Archie]

Amazing!

 

[GVL224]

1 час назад, Voss сказал:

Oh my god 

 

What size and weight is this jewel ?

 

I must arrange my desktop before taking one, but one day one of this will be mine ?

It is "Artur"
in the width of 215 mm
in the depth of 410 mm
Weight about 2.5 kg.
 

[Seb71]

Is the base plate "lip" slightly larger than on your regular throttles, to make room for those 4 mounting holes?

 

I was thinking about mounting options, too.

[GVL224]

19 минут назад, Seb71 сказал:

Is the base plate "lip" slightly larger than on your regular throttles, to make room for those 4 mounting holes?

 

I was thinking about mounting options, too.

Yes, here it is increased (10 mm), in the standard case a ledge 5mm.
My opinion is, it is better to locate these holes inside the case, so that they can not be seen from the outside.
Then, of course, you need to remove the lid to fix the base, but this is not often done.

[LukeFF]

6 hours ago, Seb71 said:

Is the base plate "lip" slightly larger than on your regular throttles, to make room for those 4 mounting holes?

 

I was thinking about mounting options, too.

 

I've found that it's best to use a couple strips of industrial-strength velcro. Even though my GVL unit hangs a bit off the sides of my mount, it sits firmly in place, no matter what.

[FlyingNutcase]

Too awesome but are there other color options for the "ping pong ball" knobs other than yellow and pink? How about gray, dark green, black etc? 

[GVL224]

1 час назад, FlyingNutcase сказал:

Too awesome but are there other color options for the "ping pong ball" knobs other than yellow and pink? How about gray, dark green, black etc? 

Yes, of course, there are other colors.
The color is chosen by the customer.

[LukeFF]

18 hours ago, FlyingNutcase said:

Too awesome but are there other color options for the "ping pong ball" knobs other than yellow and pink? How about gray, dark green, black etc? 

 

That's red, not pink.

[FlyingNutcase]

On 6/16/2018 at 11:48 AM, LukeFF said:

 

That's red, not pink.

That's quite funny to hear since I'm a bit color impaired. It's definitely pink to me. I was going to comment on the color preferences of some of you guys, lol. 

[Wolf8312]

On 6/15/2018 at 1:35 AM, LukeFF said:

 

I've found that it's best to use a couple strips of industrial-strength velcro. Even though my GVL unit hangs a bit off the sides of my mount, it sits firmly in place, no matter what.

 

Mind telling me how much that monster of yours cost?

[LukeFF]

58 minutes ago, Wolf8312 said:

Mind telling me how much that monster of yours cost?

 

About $230.

[Wolf8312]

Oh I paid the same for mine though yours seems somewhat...bigger!

[kestrel79]

What's the dimensions of the IL2 edition throttle?

[-332FG-Gordon200]

30 minutes ago, kestrel79 said:

What's the dimensions of the IL2 edition throttle?

It is "Artur"
in the width of 215 mm
in the depth of 410 mm
Weight about 2.5 kg.

Or W 8.5"

      D 16.15"

    Wt 5 pounds

[Seb71]

I think he is asking about the dimensions of this throttle:

 

Edited June 21, 2018 by Seb71

[GVL224]

6 часов назад, kestrel79 сказал:

What's the dimensions of the IL2 edition throttle?

The size of the base of the case is 211mm * 200mm
The height of the case is 45mm.

[GVL224]

Bf109 with an individual front panel and two additional buttons on the handle.

https://viuly.io/video/bf109-585637

[LukeFF]

So, I did some redecorating of my knobs today, to make it easier to remember what each lever does. Left to right: Inlet Cowl Flaps / Outlet Cowl Flaps & Water Radiator / Oil Radiator / RPM / Throttle / Mixture.  

 

Edited July 12, 2018 by LukeFF

[Guest deleted@83466]

19 minutes ago, LukeFF said:

So, I did some redecorating of my knobs today, to make it easier to remember what each lever does. Left to right: Inlet Cowl Flaps / Outlet Cowl Flaps & Water Radiator / Oil Radiator / RPM / Throttle / Mixture.  

 

 

 

Careful, you might invoke a toxic wave of knob-envy on this forum.

[LukeFF]

11 hours ago, SeaSerpent said:

Careful, you might invoke a toxic wave of knob-envy on this forum.

 

I think it's my fancy Del Taco cup that'll make me the envy of everyone here. ? 

[On_The_Piss]

Take all of my money.

[Kandiru]

The Ukrainian armaments industry at its best. Very solid and overengineered in the CCCP tradition. Reminds me old our old VEF radio, it still works 30 years later.

[GVL224]

Throttle "Tumu"
https://youtu.be/M4byIrFj0Zw

[Wilhelm_Heidkamp]

Impressive! 

[HR_Tumu]

uuuuao!! im very happy to see  this images  

i

[ITAF_Rani]

Coooool !!

[Artunius]

I absolutely love your custom throttle boxes.

[Seethereu8047]

Hi GVL 224 , How to order and do you have web site , and I can found the all product of you.

[GVL224]

28.10.2019 в 15:59, Seethereu8047 сказал:

Hi GVL 224 , How to order and do you have web site , and I can found the all product of you.

Seethereu8047  Hello.
The site is there but it has not been completed ... http://gvl224.com/
To place an order, write me an e-mail gvl224@ukr.net
All the options that I did on my YouTube channel https://www.youtube.com/user/GVL224/videos
Regards, Vitaly.

 

[III/JG52_Otto_-I-]

On 3/16/2018 at 1:13 PM, GVL224 said:

The given copy is made "under the order".
I'll collect the same or with the introduction of your "Wishlist".
In the control unit there are 3 mechanics GVL (RUD, Universal, Sparka).
Iron mechanics with the possibility of adjusting the resistance force, axles on bearings with non-contact sensors.
On the handle of the throttle there are 4 buttons, two of them on the front side of the handle.
Handles mechanic are printed on a 3D printer.
Front panel:
- 12 buttons;
- 5 "tumblers" without fixing in extreme positions, 1 toggle switch is like two buttons.
The potentiometer (axis) is mounted on the right side of the housing.
On the top panel are 6 buttons (I recommend 5 so that the total does not exceed 32 buttons).
The case is made of a "composite" 3mm thick, going like a 3D puzzle ...
The color, size and shape of the handles printed on the 3D printer can be customized.
The color and size of the handles on the potentiometers and additional mechanics may differ from those on the video (depending on available at the time of the order)
For questions and suggestions, write here or on my email GVL224@ukr.net
 

https://youtu.be/u-KoPDW6lbM

I like this one, ..it's possible purchase one like this?? ..

[GVL224]

9 часов назад, III/JG52_Otto_-I- сказал:

I like this one, ..it's possible purchase one like this?? ..

Yes, any models are available to order.
Production of 1.5-2 months.

[Cpt_Cool]

I just got my throttle from GVL, and a couple of days in, it is really sweet. I can definitely recommend it.

[GVL224]

2 часа назад, Cpt_Cool сказал:

I just got my throttle from GVL, and a couple of days in, it is really sweet. I can definitely recommend it.

Thanks!

[3uster3oo]

Hi, what are the prices for these controllers 

[GVL224]

6 часов назад, 3uster3oo сказал:

Hi, what are the prices for these controllers 

Hi, the price is calculated depending on the configuration.
The price range is 100-330 euros.