Keybindings (Hurricane )

[Madshepherd]

Hi

Following the "Beginners Guide " (list)

 

I find i am unable to keybind the        Fuel Cock 

                                                           Radiator 

                                                           Prop Pitch 

on the Hurricane .  

 

I have tried various combinations etc but without success 

is there a combination that works 

 

thanks

 

 

[Sokol1]

Fuel Cock, you can assign only one key (or button) for "Fuel cock #1 - toggle" this work ok for Spitfire but result a bit awkward for Hurricane because in this plane the cock has 3 positions: OFF - MAIN - RESERVE, but since reserve has very little (in any) use, because from MAIN you need move the cock to RESERVE to turn back to OFF.

 

If instead assign a key for "FUEL COCK #1 - Next position" and another for "FUEL COCK #1 - Prev. position" the usage became more logical, will use only OFF- MAIN - OFF.

 

Anyway both options work OK.

 

Radiator you need a key for "Radiator Open" and another for "Radiator Close", this command require press and hold the key (or can use a axis if have).

 

For propeller set a key for "Propeller Pitch - Increase" and another for "Propeller Pitch - Decrease",  this command require press and hold the key (or can use a axis if have).

 

You may notice that are options for "#1 Propeller Pitch - Increase" or "Radiator #1 - Open", but this option with # don't work for single engine planes in some cases - so avoid.

Edited January 28, 2018 by Sokol1

[Madshepherd]

Hi  Sokol 1

 

thanks for reply 

I have always supported this game over the years but this is the first time i have took it i bit more serious 

so you advice is much appreciated

I will take off and land this thing if kills me

cheers

[Sokol1]

CloD Hurricane is a bit o trick for take-off, due the tendency to nose down and flip up.

 

Besides adjust trim tail heavy drop ~28º of flaps help.

[Madshepherd]

Hi Sokol 1

 

Still couldn't get it to work on your above advice. however i found this  :----------

 

 

 Tick the option "Temperature effects" or something ... below Complex Engine Management in "Realism" menu.

Sokol1

 

Aug. 2005

 

Now it does  

 

thanks