TIR Profile

Posted January 17, 2018 · January 17, 2018

Not sure if this was the right forum to share but I thought I would share my Trackir profile with you all.

I limited all axis's to 180 and I put deadzones on several to help the constant jumping camera views when you reach max limits on the different axis's. Please adjust your hotkeys how you like them.

I hope everyone likes!!

BOS.xml

Posted January 17, 2018 · January 17, 2018

going to test it and compare with mine, thanks

Posted January 18, 2018 · January 18, 2018

cool, let me know if you like it. It actually works great in other games as well. For my setup its spot on.

Posted January 18, 2018 · January 18, 2018

cool, let me know if you like it. It actually works great in other games as well. For my setup its spot on.

I didnt like it man, too sensitive, I have one, I can share you mine and see if you like too.

Posted January 18, 2018 · January 18, 2018

sure I would love to test it out. I keep my sensitivity level at 1. I thought about bringing the response rate down to .8 or .7. Because I do a lot of snap head moves in combat I like the quick response.

Posted January 18, 2018 · January 18, 2018

This is mine if anyone want to test it:

Go to this rute: C:\Users\YourUser\AppData\Roaming\NaturalPoint\TrackIR 5\Profiles
Create a .xml file (open notepad, paste the profile text, save as: wathever.xml and change file type to all files)
Set sped to 1 and smooth to 30 or wathever you like in the software(Tested using Track ir v5.4 software)

<?xml version="1.0" encoding="UTF-16"?>
<Profile>
  <Name>IL-2_Butcher_3</Name>
  <Description>Copy of Copy of Finely tweaked on each axis for gradually increased sensitivity

with locked in centring deadzone.  Increased speed looking up

and less looking down for steady gauge reads.

  Moving in is less sensitive for very steady gauge reads and

much more sensitive moving back to make up for sitting

back against your chair.

  Roll is tuned down greatly in speed to reflect natural head

tilting.</Description>
  <ExclusiveLoad>0</ExclusiveLoad>
  <TrueViewEnabled>1</TrueViewEnabled>
  <Curve>
    <Axis>0</Axis>
    <Enabled>1</Enabled>
    <Inverted>0</Inverted>
    <Mirrored>1</Mirrored>
    <Limited>1</Limited>
    <Limit>180</Limit>
    <Type>0</Type>
    <Inputs>
      <Val>-34</Val>
      <Val>8.00707</Val>
      <Val>-27</Val>
      <Val>8</Val>
      <Val>-17.4852</Val>
      <Val>7</Val>
      <Val>-8.50888</Val>
      <Val>4.58974</Val>
      <Val>-2.46377</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>2.46377</Val>
      <Val>0</Val>
      <Val>8.50888</Val>
      <Val>4.58974</Val>
      <Val>17.4852</Val>
      <Val>7</Val>
      <Val>27</Val>
      <Val>8</Val>
      <Val>34</Val>
      <Val>8.00707</Val>
    </Inputs>
  </Curve>
  <Curve>
    <Axis>1</Axis>
    <Enabled>1</Enabled>
    <Inverted>0</Inverted>
    <Mirrored>1</Mirrored>
    <Limited>1</Limited>
    <Limit>180</Limit>
    <Type>0</Type>
    <Inputs>
      <Val>-24.5</Val>
      <Val>13.9383</Val>
      <Val>-15.8915</Val>
      <Val>11.4911</Val>
      <Val>-8.8863</Val>
      <Val>7.85228</Val>
      <Val>-3.58427</Val>
      <Val>3.60248</Val>
      <Val>-1.03561</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>1.03561</Val>
      <Val>0</Val>
      <Val>3.58427</Val>
      <Val>3.60248</Val>
      <Val>8.8863</Val>
      <Val>7.85228</Val>
      <Val>15.8915</Val>
      <Val>11.4911</Val>
      <Val>24.5</Val>
      <Val>13.9383</Val>
    </Inputs>
  </Curve>
  <Curve>
    <Axis>2</Axis>
    <Enabled>1</Enabled>
    <Inverted>0</Inverted>
    <Mirrored>1</Mirrored>
    <Limited>0</Limited>
    <Limit>180</Limit>
    <Type>0</Type>
    <Inputs>
      <Val>-49</Val>
      <Val>6</Val>
      <Val>-30</Val>
      <Val>6</Val>
      <Val>-22.4852</Val>
      <Val>6</Val>
      <Val>-6.50888</Val>
      <Val>3.58974</Val>
      <Val>-5</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>5</Val>
      <Val>0</Val>
      <Val>6.50888</Val>
      <Val>3.58974</Val>
      <Val>22.4852</Val>
      <Val>6</Val>
      <Val>30</Val>
      <Val>6</Val>
      <Val>49</Val>
      <Val>6</Val>
    </Inputs>
  </Curve>
  <Curve>
    <Axis>3</Axis>
    <Enabled>1</Enabled>
    <Inverted>0</Inverted>
    <Mirrored>1</Mirrored>
    <Limited>0</Limited>
    <Limit>180</Limit>
    <Type>0</Type>
    <Inputs>
      <Val>-6</Val>
      <Val>6</Val>
      <Val>-5</Val>
      <Val>5</Val>
      <Val>-4</Val>
      <Val>4</Val>
      <Val>-3</Val>
      <Val>3</Val>
      <Val>-0.5</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>0.0225942</Val>
      <Val>0.5</Val>
      <Val>0</Val>
      <Val>3</Val>
      <Val>3</Val>
      <Val>4</Val>
      <Val>4</Val>
      <Val>5</Val>
      <Val>5</Val>
      <Val>6</Val>
      <Val>6</Val>
    </Inputs>
  </Curve>
  <Curve>
    <Axis>4</Axis>
    <Enabled>1</Enabled>
    <Inverted>0</Inverted>
    <Mirrored>1</Mirrored>
    <Limited>0</Limited>
    <Limit>180</Limit>
    <Type>0</Type>
    <Inputs>
      <Val>-2.5</Val>
      <Val>6</Val>
      <Val>-2</Val>
      <Val>5</Val>
      <Val>-1.5</Val>
      <Val>4</Val>
      <Val>-1</Val>
      <Val>3</Val>
      <Val>-0.5</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>0.5</Val>
      <Val>0</Val>
      <Val>1</Val>
      <Val>3</Val>
      <Val>1.5</Val>
      <Val>4</Val>
      <Val>2</Val>
      <Val>5</Val>
      <Val>2.5</Val>
      <Val>6</Val>
    </Inputs>
  </Curve>
  <Curve>
    <Axis>5</Axis>
    <Enabled>1</Enabled>
    <Inverted>0</Inverted>
    <Mirrored>1</Mirrored>
    <Limited>1</Limited>
    <Limit>180</Limit>
    <Type>0</Type>
    <Inputs>
      <Val>-12</Val>
      <Val>6</Val>
      <Val>-9</Val>
      <Val>5</Val>
      <Val>-6</Val>
      <Val>4</Val>
      <Val>-4</Val>
      <Val>3</Val>
      <Val>-0.25</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>0.25</Val>
      <Val>0</Val>
      <Val>4</Val>
      <Val>3</Val>
      <Val>6</Val>
      <Val>4</Val>
      <Val>9</Val>
      <Val>5</Val>
      <Val>12</Val>
      <Val>6</Val>
    </Inputs>
  </Curve>
  <Hotkey>
    <Name>Center</Name>
    <ActionID>1</ActionID>
    <Key>262267</Key>
    <Enable>1</Enable>
    <Toggle>1</Toggle>
    <Trap>1</Trap>
    <IsDevice>0</IsDevice>
    <DeviceGuid>{00000000-0000-0000-0000-000000000000}</DeviceGuid>
    <ButtonID>10</ButtonID>
  </Hotkey>
  <Hotkey>
    <Name>Pause</Name>
    <ActionID>2</ActionID>
    <Key>262264</Key>
    <Enable>1</Enable>
    <Toggle>1</Toggle>
    <Trap>1</Trap>
    <IsDevice>0</IsDevice>
    <DeviceGuid>{00000000-0000-0000-0000-000000000000}</DeviceGuid>
    <ButtonID>0</ButtonID>
  </Hotkey>
  <Hotkey>
    <Name>Precision</Name>
    <ActionID>3</ActionID>
    <Key>262265</Key>
    <Enable>1</Enable>
    <Toggle>0</Toggle>
    <Trap>1</Trap>
    <IsDevice>0</IsDevice>
    <DeviceGuid>{00000000-0000-0000-0000-000000000000}</DeviceGuid>
    <ButtonID>8</ButtonID>
  </Hotkey>
  <Hotkey>
    <Name>Profile</Name>
    <ActionID>4</ActionID>
    <Key>119</Key>
    <Enable>0</Enable>
    <Toggle>1</Toggle>
    <Trap>1</Trap>
    <IsDevice>0</IsDevice>
    <DeviceGuid>{00000000-0000-0000-0000-000000000000}</DeviceGuid>
    <ButtonID>0</ButtonID>
  </Hotkey>
</Profile>

In case you have problems here is the xml file: IL-2_Butcher_3.xml
Updated

Edited January 28, 2018 by SJ_Butcher

Posted January 18, 2018 · January 18, 2018

Thanks! I will give it a try and see how I like it.

Posted January 20, 2018 · January 20, 2018

This is mine if anyone want to test it:

<?xml version="1.0" encoding="UTF-16"?>
<Profile>
  <Name>IL-2_Butcher_2</Name>
  <Description>Copy of Finely tweaked on each axis for gradually increased sensitivity

with locked in centring deadzone.  Increased speed looking up

and less looking down for steady gauge reads.

  Moving in is less sensitive for very steady gauge reads and

much more sensitive moving back to make up for sitting

back against your chair.

  Roll is tuned down greatly in speed to reflect natural head

tilting.</Description>
  <ExclusiveLoad>0</ExclusiveLoad>
  <TrueViewEnabled>1</TrueViewEnabled>
  <Curve>
    <Axis>0</Axis>
    <Enabled>1</Enabled>
    <Inverted>0</Inverted>
    <Mirrored>1</Mirrored>
    <Limited>0</Limited>
    <Limit>180</Limit>
    <Type>0</Type>
    <Inputs>
      <Val>-49</Val>
      <Val>6</Val>
      <Val>-30</Val>
      <Val>6</Val>
      <Val>-22.4852</Val>
      <Val>6</Val>
      <Val>-6.50888</Val>
      <Val>3.58974</Val>
      <Val>-2.46377</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>2.46377</Val>
      <Val>0</Val>
      <Val>6.50888</Val>
      <Val>3.58974</Val>
      <Val>22.4852</Val>
      <Val>6</Val>
      <Val>30</Val>
      <Val>6</Val>
      <Val>49</Val>
      <Val>6</Val>
    </Inputs>
  </Curve>
  <Curve>
    <Axis>1</Axis>
    <Enabled>1</Enabled>
    <Inverted>0</Inverted>
    <Mirrored>1</Mirrored>
    <Limited>0</Limited>
    <Limit>180</Limit>
    <Type>0</Type>
    <Inputs>
      <Val>-29.5748</Val>
      <Val>14.747</Val>
      <Val>-16.8915</Val>
      <Val>11.4911</Val>
      <Val>-12.8863</Val>
      <Val>7.85228</Val>
      <Val>-7.58427</Val>
      <Val>3.60248</Val>
      <Val>-1.03561</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>1.03561</Val>
      <Val>0</Val>
      <Val>7.58427</Val>
      <Val>3.60248</Val>
      <Val>12.8863</Val>
      <Val>7.85228</Val>
      <Val>16.8915</Val>
      <Val>11.4911</Val>
      <Val>29.5748</Val>
      <Val>14.747</Val>
    </Inputs>
  </Curve>
  <Curve>
    <Axis>2</Axis>
    <Enabled>1</Enabled>
    <Inverted>0</Inverted>
    <Mirrored>1</Mirrored>
    <Limited>0</Limited>
    <Limit>180</Limit>
    <Type>0</Type>
    <Inputs>
      <Val>-49</Val>
      <Val>6</Val>
      <Val>-30</Val>
      <Val>6</Val>
      <Val>-22.4852</Val>
      <Val>6</Val>
      <Val>-6.50888</Val>
      <Val>3.58974</Val>
      <Val>-2.46377</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>2.46377</Val>
      <Val>0</Val>
      <Val>6.50888</Val>
      <Val>3.58974</Val>
      <Val>22.4852</Val>
      <Val>6</Val>
      <Val>30</Val>
      <Val>6</Val>
      <Val>49</Val>
      <Val>6</Val>
    </Inputs>
  </Curve>
  <Curve>
    <Axis>3</Axis>
    <Enabled>1</Enabled>
    <Inverted>0</Inverted>
    <Mirrored>1</Mirrored>
    <Limited>0</Limited>
    <Limit>180</Limit>
    <Type>0</Type>
    <Inputs>
      <Val>-6</Val>
      <Val>6</Val>
      <Val>-5</Val>
      <Val>5</Val>
      <Val>-4</Val>
      <Val>4</Val>
      <Val>-3</Val>
      <Val>3</Val>
      <Val>-0.5</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>0.0225942</Val>
      <Val>0.5</Val>
      <Val>0</Val>
      <Val>3</Val>
      <Val>3</Val>
      <Val>4</Val>
      <Val>4</Val>
      <Val>5</Val>
      <Val>5</Val>
      <Val>6</Val>
      <Val>6</Val>
    </Inputs>
  </Curve>
  <Curve>
    <Axis>4</Axis>
    <Enabled>1</Enabled>
    <Inverted>0</Inverted>
    <Mirrored>1</Mirrored>
    <Limited>0</Limited>
    <Limit>180</Limit>
    <Type>0</Type>
    <Inputs>
      <Val>-2.5</Val>
      <Val>6</Val>
      <Val>-2</Val>
      <Val>5</Val>
      <Val>-1.5</Val>
      <Val>4</Val>
      <Val>-1</Val>
      <Val>3</Val>
      <Val>-0.5</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>0.5</Val>
      <Val>0</Val>
      <Val>1</Val>
      <Val>3</Val>
      <Val>1.5</Val>
      <Val>4</Val>
      <Val>2</Val>
      <Val>5</Val>
      <Val>2.5</Val>
      <Val>6</Val>
    </Inputs>
  </Curve>
  <Curve>
    <Axis>5</Axis>
    <Enabled>1</Enabled>
    <Inverted>0</Inverted>
    <Mirrored>1</Mirrored>
    <Limited>1</Limited>
    <Limit>180</Limit>
    <Type>0</Type>
    <Inputs>
      <Val>-12</Val>
      <Val>6</Val>
      <Val>-9</Val>
      <Val>5</Val>
      <Val>-6</Val>
      <Val>4</Val>
      <Val>-4</Val>
      <Val>3</Val>
      <Val>-0.25</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>0</Val>
      <Val>0.25</Val>
      <Val>0</Val>
      <Val>4</Val>
      <Val>3</Val>
      <Val>6</Val>
      <Val>4</Val>
      <Val>9</Val>
      <Val>5</Val>
      <Val>12</Val>
      <Val>6</Val>
    </Inputs>
  </Curve>
  <Hotkey>
    <Name>Center</Name>
    <ActionID>1</ActionID>
    <Key>262267</Key>
    <Enable>1</Enable>
    <Toggle>1</Toggle>
    <Trap>1</Trap>
    <IsDevice>0</IsDevice>
    <DeviceGuid>{00000000-0000-0000-0000-000000000000}</DeviceGuid>
    <ButtonID>10</ButtonID>
  </Hotkey>
  <Hotkey>
    <Name>Pause</Name>
    <ActionID>2</ActionID>
    <Key>262264</Key>
    <Enable>1</Enable>
    <Toggle>1</Toggle>
    <Trap>1</Trap>
    <IsDevice>0</IsDevice>
    <DeviceGuid>{00000000-0000-0000-0000-000000000000}</DeviceGuid>
    <ButtonID>0</ButtonID>
  </Hotkey>
  <Hotkey>
    <Name>Precision</Name>
    <ActionID>3</ActionID>
    <Key>262265</Key>
    <Enable>1</Enable>
    <Toggle>0</Toggle>
    <Trap>1</Trap>
    <IsDevice>0</IsDevice>
    <DeviceGuid>{00000000-0000-0000-0000-000000000000}</DeviceGuid>
    <ButtonID>8</ButtonID>
  </Hotkey>
  <Hotkey>
    <Name>Profile</Name>
    <ActionID>4</ActionID>
    <Key>119</Key>
    <Enable>0</Enable>
    <Toggle>1</Toggle>
    <Trap>1</Trap>
    <IsDevice>0</IsDevice>
    <DeviceGuid>{00000000-0000-0000-0000-000000000000}</DeviceGuid>
    <ButtonID>0</ButtonID>
  </Hotkey>
</Profile>

Pretty nice profile!! Its a little slow for my snap movements but its really smooth.

Posted January 20, 2018 · January 20, 2018

Increase the speed, it's accurate and I found it fast if you turn fast, speed should be increased in that case, to 1.6 and smooth at 30

Posted January 21, 2018 · January 21, 2018

Not sure if this was the right forum to share but I thought I would share my Trackir profile with you all.

I limited all axis's to 180 and I put deadzones on several to help the constant jumping camera views when you reach max limits on the different axis's. Please adjust your hotkeys how you like them.

I hope everyone likes!!

I liked it, it's very good to fight on the dogfight

Edited January 21, 2018 by E69_chopov

Posted January 22, 2018 · January 22, 2018

I liked it, it's very good to fight on the dogfight

Thanks! I too find it snappy on a dogfight. Its nice for quick snap views.

Posted January 22, 2018 · January 22, 2018

The profile of butcher is best.

Posted January 23, 2018 · January 23, 2018

The profile of butcher is best.

thank you I spent a lot of time tweacking it, and I found a formula how to do it, the updated profile I posted yesterday is better than the old version number 2

Posted January 28, 2018 · January 28, 2018

I'd like to try your Profiles,but I don't have a NaturalPoint folder in the Appdata\Roaming destination. I've tried to put the profiles in the Profiles folder where TrackIR is installed,but they don't appear in the dropdown list. My other profiles are in the same folder and they work. I remember that I had the same problem in the past,but unfortunally I can't remember how I solved it.

Posted January 28, 2018 · January 28, 2018

maybe that folder is hidden.

Posted January 28, 2018 · January 28, 2018

I checked to show hidden folders already. But noticed that I had the old 5.1 version of the software installed. I updated it to the newest 5.4,the NaturalPoint folder is in the Roaming folder now. At first try Butchers profile still didn't work,but I will try a few things when I find the time. Haven't tried others yet,hoping that the new versions still works with my old profiles atleast though.

Posted January 28, 2018 · January 28, 2018

I checked to show hidden folders already. But noticed that I had the old 5.1 version of the software installed. I updated it to the newest 5.4,the NaturalPoint folder is in the Roaming folder now. At first try Butchers profile still didn't work,but I will try a few things when I find the time. Haven't tried others yet,hoping that the new versions still works with my old profiles atleast though.

Why it didnt work? Do you know how to create xml files ir wathever files with notepad? I will try to upload the file and you just paste it in the folder

Posted January 28, 2018 · January 28, 2018

Yes, I did it already in the past. I will look into it again in the coming days. I will post the solution here, maybe i only missed something.

Posted January 28, 2018 · January 28, 2018

Yes, I did it already in the past. I will look into it again in the coming days. I will post the solution here, maybe i only missed something.

updated

Posted January 29, 2018 · January 29, 2018

Thank you very much,will give it a try later.

Posted February 4, 2018 · February 4, 2018

Today I had the time to try Butchers Profile, this time it showed up fine in the list..Not a bad profile at all,just not my cup of tea. Propably I need more time getting used to it though.

I included my Profile,I use it with 1.5 Speed and 30 Smooth. It doesn't have much of a Deadzone anywhereand is very responsive. Most will think it moves too fast most likely.

IL2-Pirato.xml

Sign In

TIR Profile

Recommended Posts

Babayega

SJ_Butcher

Babayega

SJ_Butcher

Babayega

SJ_Butcher

Babayega

Babayega

SJ_Butcher

E69_chopo

Babayega

E69_chopo

SJ_Butcher

ST_Pirato

Dutch2

ST_Pirato

SJ_Butcher

ST_Pirato

SJ_Butcher

ST_Pirato

ST_Pirato

Create an account or sign in to comment

Create an account

Sign in

Browse All

Activity