vx111vx111swift Posted January 12, 2018 Posted January 12, 2018 I can fly the JU52 as long as it is airborne and off the ground. All functions of the plane work . However when on the take off strip. the throttles do not work . I start off with all 3 engines , then either one or 2 engine handles pull back to idle position and will no longer function correctly. Same goes for a landing . Once landed the throttles will no longer work correctly. But in actual flying all is ok. Any ideas what may be causing this.
PanzerPajamas Posted January 12, 2018 Posted January 12, 2018 I suspect you may be touching the brakes, which cuts the throttle.
vx111vx111swift Posted January 12, 2018 Author Posted January 12, 2018 I attempted to take off with out touching pedals. same issue one or two throttles turn back to idle . Seems to have nothing to do with brakes.
Archie Posted January 12, 2018 Posted January 12, 2018 Check if you have a control conflict in settings.
RedeyeStorm Posted January 12, 2018 Posted January 12, 2018 If it is number one and three than mayby you need to reverse the axis of the left and right toebrakes (assuming you have them on an joystick axis).
vx111vx111swift Posted January 13, 2018 Author Posted January 13, 2018 I wish to thank all you gentlemen for your help. It was a combination of everything you all stated. Took some time to figure it out. But running correctly now. Again many thanks
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now