Rudder Pedals setup question

[Hans-Hahn]

I currently use the stick twist for rudder and my yaw axis settings show the arrow centered and twisting results in the expected arrow travel.  When I switch to using rudder pedals the YAW axis shows the arrow control from left to right and not centered. Right rudder moves the arrow all the way to the opposite side and letting off pressure the arrow goes back to the left. If I try to use it this way and power is applied to the airplane it will spin in circles.  Doh...  

 

I deleted all the inputs for the YAW and tried a new key input using the pedals but the squiggly line icon on the far right does not appear.  If I assign a keyboard key to YAW then it shows up but it is the left to right travel and not a centered travel. If I reset it up using the twist on the stick it works fine.  Sorry, hard to explain and I'm not at my sim computer to grab screen shots. 

 

They are the CH Cessna rudder pedals and wondering if either they won't work or there is something I'm missing?

Edited October 4, 2017 by Hans-Hahn

[ST_Pirato]

Try to recalibrate them using the CH Software. When I was still using my CH Throttle quadrant,I had to recalibrate it everytime I had it disconected from the USB port.