HELP-VR Issues

[fiddlinjim]

 

I have some strange happenings in VR with my Oculus Rift.

1.   Sometimes when I try and start Il2 BOS-BOK, I get the first screen with my ID and password and the cursor arrow has limited/restricted movement

and I can't select the enter button.   Then if I exit with Task Manager, cancel Steam, Oculus and IL2 and restart IL2,  things will be OK.

Screen resolution is 1680x1050

2.   When I start to fly I find that some of my Thrustmaster Warthog key bindings are not the same as I previously had selected, usually just one button difference.

This has happened on several occasions and at first I suspected a double binding had been setup, but this was not the case.  

Example: Yesterday Controller 1-button 15 selected for F1 action and worked fine.  Today F1 action was found to be Controller 1-button 16

The new button bindings will work Ok once I determine where they are.

Any assistance or guidance will be appreciated

I play with UItra selected and with all graphic options at their highest settings; cockpit is clear and  terrain is beautiful.   FPS varies from 45 to 90.

 

My rig:

Win 10, i7-7700K liquid cooled, 32 GB, GTX 1080ti, 1 TB SSD, 4TB HDD, Oculus Rift CV1, Thrustmaster Warthog Joystick with extension and Throttle, Saitek Pedals

[dburne]

1: Is usually a monitor resolution issue, insure your mouse is around the middle of the screen on your monitor when you start BoS. Are you running at your monitor's native resolution?

 

2: Are you unplugging the Warthog from it's USB port or turning all power off to the system when you shut down? Sometimes when that happens and it gets re-plugged back in it might change some settings. I leave mine always plugged in.

[fiddlinjim]

dburne

I did find that when I hit the right mouse button when starting IL2 it seems to clear the stuck cursor.

I never unplug the Warthog and always leave my desktop in sleep mode.

[Nibbio]

2. just a shot in the dark, you mentioned the extension, maybe check the cable connections inside the extension are firm and have not come loose?

[dburne]

dburne

I did find that when I hit the right mouse button when starting IL2 it seems to clear the stuck cursor.

I never unplug the Warthog and always leave my desktop in sleep mode.

 

Do you have power management disabled for your usb devices?

[TP_Silk]

For issue 1) - I sometimes get this if I alt-tab out of the window to start TS or something and forget to give the IL2 window focus again before putting my headset back on.