xxwikingxx Posted July 1, 2017 Posted July 1, 2017 Hallo leute! ich möchte mich mal kurz vorstellen! mein Name ist Martin, gamename/rufname "xxwikingxx", bin 32 und komme aus österreich. ich liebe die Fliegerei und bin nach einem PC Neukauf auf das game aufmerksam geworden. mein ziel ist es mit ähnlich interessierten realitätsnah einsätze zu fliegen. natürlich geht das nicht von heute auf morgen, schon klar. aber ich habe ein ziemlich nerviges Problem das ich sehr gerne gelöst hätte! habe mir wie gesagt nach einiger Überlegung das game via steam zugelegt. incl die FW 190 collector Version. nach dem download bei steam drücke ich dann immer auf den "spielen" button und es passiert nichts! aber absolut nichts! unten in der tastleiste steht dann immer beim Symbol (keine Rückmeldung)! ich wäre euch sehr dankbar wenn ihr mir helfen würdet! kameradschaftliche grüße martin p.s.: bin kein PC Freak also bitte alles langsam erklären!
Yogiflight Posted July 1, 2017 Posted July 1, 2017 Wenn du das Spiel auf Steam gekauft hast, hast du den Key auf der Homepage von IL2 Sturmovik aktiviert?
xxwikingxx Posted July 2, 2017 Author Posted July 2, 2017 hi ja hab ich. beide key`s. da ich mir die FW 190 auch geholt hab. weie gesagt, wenn ich bei steam auf spielen drücke, komt in der Task leiste der rote Stern. und es tut sich nichts. nach 1 Minute steht dann unten in der leiste beim roten Stern, keine Rückmeldung. es ist ziemlich nervig! lg Martin
ER*Wumme Posted July 2, 2017 Posted July 2, 2017 (edited) Hi Martin, habe prinzipiell nichts gegen steam , denn ich besitze auch diverse Spiele dort. Mein Tipp, falls deine Finanzen das zulassen. Wenn du das Spiel weniger als eine Stunde gespielt hast -und das ist bei Dir der Fall- gebe es zurück..bekommst dann leider nur eine Gutschrift. Gehe dann auf die offizielle Seite des 1 CGS- Teams und kaufe dir das Spiel dort ( %%% summersale bis 6. Juli ). Das ist beim Ordern auch ein wenig umständlich ,aber man schafft das . In der Regel hingt steam zeitlich bei updates immer hinterher und wenn hier Leute posten die Probleme haben, sind es fast immer steam-User. Horrido und willkommen im WOL-Server. Edited July 2, 2017 by propfan
xxwikingxx Posted July 2, 2017 Author Posted July 2, 2017 hi! erstmal danke für die info! werd das mal probieren mit dem zurückgeben! es ist halt nervig weil ich unbedingt zocken möchte und nix funkt. bei steam hatte ich solche probleme echt noch nie! echt komisch! lg martin
xxwikingxx Posted July 2, 2017 Author Posted July 2, 2017 funkt irgendwie auch nicht so recht! hab mal ein ticket aufgegeben! mal sehn was es bringt! echt zum kotzen!
L3Pl4K Posted July 2, 2017 Posted July 2, 2017 (edited) Schreib bitte mal deine Systemspezifikationen+Betriebssystem in dieses Thema. Edited July 2, 2017 by L3Pl4K
xxwikingxx Posted July 2, 2017 Author Posted July 2, 2017 (edited) System AMD Ryzen 7 1700X EightCore 16GB RAM 64 Bit System Windows 10 Home lg Edited July 2, 2017 by xxwikingxx
xxwikingxx Posted July 2, 2017 Author Posted July 2, 2017 ??? AHHHH! eine RX470 Graphics hängt das glaubst du damit zusammen?
L3Pl4K Posted July 2, 2017 Posted July 2, 2017 Was für eine Grafikkarte + Treiber hast du? Hast du eine Nvidia oder eine AMD? Gib bitte einmal im Windows durchsuchen(neben dem Windows Symbol unten links) dxdiag ein. Dann schaust du unter Anzeige auf den "Name" und schreibst ihn hier mal rein.
xxwikingxx Posted July 2, 2017 Author Posted July 2, 2017 ist eine Radeon RX 470 Graphics Prozessor AMD
7./SchG2_v*Athlon Posted July 2, 2017 Posted July 2, 2017 (edited) Erstmal Willkommen hier xxwikingxx, gehe mal in deinen STEAM Ordern & starte mal die IL2.EXE direkt. Siehe unten: X:Steam/SteamApps/common/IL-2 Sturmovik Battle of Stalingrad/bin/game/ il-2.exe oder Restarter.exe Edited July 2, 2017 by 7./SchG.2*SirAthlon
xxwikingxx Posted July 2, 2017 Author Posted July 2, 2017 hi danke fürs willkommen heißen! hatte ich alles schon probiert! hab mich schon ein bisschen eingelesen. aber es half alles nichts! lg
L3Pl4K Posted July 2, 2017 Posted July 2, 2017 (edited) Spiel dir mal den neusten Treiber auf. http://support.amd.com/de-de/download/desktop?os=Windows%2010%20-%2064 Hast du schon einmal versucht die IL2 exe als Administrator auszuführen? Du kannst bei Steam auch die Spieldateien auf Fehler überprüfen. Edited July 2, 2017 by L3Pl4K
xxwikingxx Posted July 2, 2017 Author Posted July 2, 2017 so hab jetzt alles probiert! hab mir sogar BOM direkt bei der HP geholt. installiert alles und dann geht wieder nix! das darfs doch nicht sein mensch!
L3Pl4K Posted July 2, 2017 Posted July 2, 2017 Ich gehe mal davon aus das deinen anderen Spiele funktionieren.
L3Pl4K Posted July 2, 2017 Posted July 2, 2017 Das Spiel wurde eigentlich auf DX11 umgestellt...... https://www.microsoft.com/en-us/download/details.aspx?id=35 starte mal das websetup
ram0506 Posted July 2, 2017 Posted July 2, 2017 Hallo Martin, ein herzliches Willkommen auch von mir. Sehr ärgerlich, wenn man gleich von Anfang an so eingebremst wird. Eine genaue Vorstellung, was da bei Dir schief läuft, habe ich jetzt leider auch nicht, mit Steam habe ich auch wenig zu tun. Evtl. noch versuchen, das Anti-Virenprogramm beim Start von IL2 mal zu deaktivieren?
xxwikingxx Posted July 2, 2017 Author Posted July 2, 2017 dx11 hab ich schon drauf. was solls. @ram0506: ja das stimmt! es ist wirklich sehr schade wenn man sich einen neuen PC kauft, sich aufs game freut und dann so dasteht. leider!
der-blaue-max Posted July 2, 2017 Posted July 2, 2017 - unter Steam kannst Du die Installation reparieren, versuch das mal...
7./SchG2_v*Athlon Posted July 2, 2017 Posted July 2, 2017 (edited) Poste mal was für eine Win10 Version Du hast z. b. ------------------------------------------------------------------------------ Edition : Windowa 10 PRO Version : 1703 Inst. RAM: 32GB Systemtyp: 64-Bit Betriebssystem ----------------------------------------------------------------------------- Kopieren auch mal von der startup.cfg ,den teil hier ins Forum. [KEY = graphics] 3dhud = 0 adapter = 0 bloom_enable = 0 desktop_center = 1 detail_rt_res = 1024 fps_counter = 0 fps_limit = 60 full_height = 768 full_width = 1280 fullscreen = 0 gamma = 1.00000 grass_distance = 100.00000 hdr_enable = 0 land_anisotropy = 1 land_tex_lods = 0 mgpu_compatible = 0 mirrors = 1 multisampling = 2 or_enable = 0 post_sharpen = 0 preset = 2 rescale_target = 1.00000 ssao_enable = 0 vsync = 1 win_height = 1080 win_width = 1920 X:Steam/SteamApps/common/IL-2 Sturmovik Battle of Stalingrad/data/ Edited July 2, 2017 by 7./SchG.2*SirAthlon
xxwikingxx Posted July 2, 2017 Author Posted July 2, 2017 wie gesagt ich bin ja nicht der PC Freak an sich, also wo kann ich das finden? systemsteuerung?
ER*Wumme Posted July 2, 2017 Posted July 2, 2017 Hi Martin, nicht aufgeben.. irgendwann klappts schon. Wir können alle nur raten hier , da es zu viele Ursachen gibt.
radio Posted July 3, 2017 Posted July 3, 2017 (edited) Wie viel Arbeitsspeicher hat die Grafikkarte? Und wann ist der Treiber das letzte mal erneuert worden? Und wenn ist der alte Treiber vorher deinstalliert worden ? Auch die Windows Firewall kann das Spiel sperren ! Edited July 3, 2017 by radio
7./SchG2_slide Posted July 3, 2017 Posted July 3, 2017 Willkommen! 1. RX470 4GB oder 8GB also nicht weniger als 1GB 2.Die letzten Crimson Treiber haben alle mir BoS funktioniert 3. Win 10 macht das Automatisch mit AMD Treiber. 4.Online Ja aber nicht den Start des Games. Bei mir war mal die Auflösung im Desktop nicht Kompatibel mit BoS Auflösung,SIrAthlon hat mir das in der startup.cfg geändert. Genau Ahnung habe ich nicht von dem ganzen PC zeugs.
Blooddawn1942 Posted July 3, 2017 Posted July 3, 2017 Ich würde das Problem mal dem Support schildern.
7./SchG2_v*Athlon Posted July 3, 2017 Posted July 3, 2017 wie gesagt ich bin ja nicht der PC Freak an sich, also wo kann ich das finden? systemsteuerung? Ok dann machen wir das anders. Drücke die "Win R" Tasten & tippe DXDIAG dann bestätigen. Mache eine Kopie "Alle Informationen speichern" Die DXDIAG.txt hier ins Forum stellen. Es ist noch keine Kopie von der startup.cfg hochgeladen.
xxwikingxx Posted July 3, 2017 Author Posted July 3, 2017 System Information------------------ Time of this report: 7/3/2017, 18:36:53 Machine name: DESKTOP-6QJUMMD Machine Id: {5E4703ED-09BC-4D98-9265-A6ADBDFF30E8} Operating System: Windows 10 Home 64-bit (10.0, Build 15063) (15063.rs2_release.170317-1834) Language: German (Regional Setting: German) System Manufacturer: Micro-Star International Co., Ltd System Model: MS-7A34 BIOS: Default System BIOS Processor: AMD Ryzen 7 1700X Eight-Core Processor (16 CPUs), ~3.4GHz Memory: 16384MB RAM Available OS Memory: 16336MB RAM Page File: 4517MB used, 17962MB available Windows Dir: C:\Windows DirectX Version: DirectX 12 DX Setup Parameters: Not found User DPI Setting: Using System DPI System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled Miracast: Available, with HDCPMicrosoft Graphics Hybrid: Not Supported DxDiag Version: 10.00.15063.0000 64bit Unicode ------------DxDiag Notes------------ Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Input Tab: No problems found. --------------------DirectX Debug Levels--------------------Direct3D: 0/4 (retail)DirectDraw: 0/4 (retail)DirectInput: 0/5 (retail)DirectMusic: 0/5 (retail)DirectPlay: 0/9 (retail)DirectSound: 0/5 (retail)DirectShow: 0/6 (retail) ---------------Display Devices--------------- Card name: Radeon RX 470 Graphics Manufacturer: Advanced Micro Devices, Inc. Chip type: AMD Radeon Graphics Processor (0x67DF) DAC type: Internal DAC(400MHz) Device Type: Full Device Device Key: Enum\PCI\VEN_1002&DEV_67DF&SUBSYS_34111462&REV_CF Device Status: 0180200A [DN_DRIVER_LOADED|DN_STARTED|DN_DISABLEABLE|DN_NT_ENUMERATOR|DN_NT_DRIVER]Device Problem Code: No ProblemDriver Problem Code: Unknown Display Memory: 16308 MB Dedicated Memory: 8140 MB Shared Memory: 8168 MB Current Mode: 1920 x 1080 (32 bit) (59Hz) Monitor Name: Generic PnP Monitor Monitor Model: ASUS VP278 Monitor Id: ACI27C8 Native Mode: 1920 x 1080(p) (60.000Hz) Output Type: HDMI Driver Name: C:\Windows\System32\DriverStore\FileRepository\c0313745.inf_amd64_133311ca362c9cc6\aticfx64.dll,C:\Windows\System32\DriverStore\FileRepository\c0313745.inf_amd64_133311ca362c9cc6\aticfx64.dll,C:\Windows\System32\DriverStore\FileRepository\c0313745.inf_amd64_133311ca362c9cc6\aticfx64.dll,C:\Windows\System32\DriverStore\FileRepository\c0313745.inf_amd64_133311ca362c9cc6\amdxc64.dllDriver File Version: 22.19.0162.0004 (English) Driver Version: 22.19.162.4 DDI Version: 12 Feature Levels: 12_0,11_1,11_0,10_1,10_0,9_3,9_2,9_1 Driver Model: WDDM 2.2Graphics Preemption: Primitive Compute Preemption: DMA Miracast: Not SupportedHybrid Graphics GPU: Not Supported Power P-states: Not Supported Driver Attributes: Final Retail Driver Date/Size: 24.04.2017 02:00:00, 1676248 bytes WHQL Logo'd: Yes WHQL Date Stamp: Unknown Device Identifier: {D7B71EE2-249F-11CF-D677-B31473C2DB35} Vendor ID: 0x1002 Device ID: 0x67DF SubSys ID: 0x34111462 Revision ID: 0x00CF Driver Strong Name: oem10.inf:cb0ae414afaa5b86:ati2mtag_Polaris10DS:22.19.162.4:pci\ven_1002&dev_67df&rev_cf Rank Of Driver: 00D12000 Video Accel: ModeMPEG2_A ModeMPEG2_C DXVA2 Modes: DXVA2_ModeMPEG2_VLD DXVA2_ModeMPEG2_IDCT DXVA2_ModeH264_VLD_NoFGT DXVA2_ModeHEVC_VLD_Main DXVA2_ModeH264_VLD_Stereo_Progressive_NoFGT DXVA2_ModeH264_VLD_Stereo_NoFGT DXVA2_ModeVC1_VLD DXVA2_ModeMPEG4pt2_VLD_AdvSimple_NoGMC DXVA2_ModeHEVC_VLD_Main10 Deinterlace Caps: {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps= {3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps= {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps= {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps= {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps= {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps= {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps= D3D9 Overlay: Not Supported DXVA-HD: Not Supported DDraw Status: Enabled D3D Status: Enabled AGP Status: Enabled MPO Caps: Not Supported MPO Stretch: Not Supported MPO Media Hints: Not Supported MPO Formats: Not Supported ich hoffe das is das richtige! @Radio: der PC ist ca. 2 Wochen alt. ist also alles neu drauf. aber vielen dank an euch alle für die hilfe. wir werden das scho irgendwie hinkriegen. lg
xxwikingxx Posted July 3, 2017 Author Posted July 3, 2017 hab mir nämlich auch den logitech saitek x52 pro bestellt! bin schon neugierig wie der is. kanns scho gar nicht erwarten bis das game mal läuft! :D
7./SchG2_v*Athlon Posted July 3, 2017 Posted July 3, 2017 (edited) DXdiag schaut gut aus, jetzt noch die startup.cfg die findest Du im Ordner: X:Steam/SteamApps/common/IL-2 Sturmovik Battle of Stalingrad/data/ Die X52 X52 Pro hatte ich auch,den habe ich jetzt gefällt mir besser. http://www.thrustmaster.com/de_DE/produkte/t16000m-fcs-hotas Edited July 3, 2017 by 7./SchG.2*SirAthlon
xxwikingxx Posted July 3, 2017 Author Posted July 3, 2017 pfu. die bring ich nich ins Forum. KEY = account] login = "" password = ""[END][KEY = camera] cinematic = 1 head_smooth = 0.50000 shake = 1[END][KEY = force_feedback] amplitude = 1.00000 enabled = 1 force = 1.00000[END][KEY = graphics] desktop_center = 1 fps_limit = 60 full_height = 768 full_width = 1280 fullscreen = 0 gamma = 1.00000 mgpu_compatible = 0 multisampling = 2 preset = 2 vsync = 0 win_width = 1920 win_height = 1080[END][KEY = input] input_map = "input.map"[END][KEY = interface] language = "eng" log = "_gui.log" showcompas = 1 showicons = 1 units = "" withdebug = 0[END][KEY = iservice] proxy_name = "alpha.il2sturmovik.net:443" register_url = "" server_debug = "" try_ping = 0 try_web_port = 1 use_proxy = 1[END][KEY = network] available_ip = "" client_download_traflimit = 1000 client_ip = "" client_upload_traflimit = 1000 downloader_port = 28100 server_download_traflimit = 1000 server_upload_traflimit = 1000 tcp_port = 28000 udp_port = 28000[END][KEY = sound] count = 32 debug_radio = 0 interface = 1 quality = 1 speedenable = true volume = 0.68000[END][KEY = system] mgenlog = 0 bin_log_folder = "" chatlog = 0 debug_info = 0 dlgbox_sky = 0 gamelog = 0 keep_binary_log = 0 mission_text_log = 0 modes = 0 playoffline = 0 reset_configs = 0 show_net_skins = 1 skin_dir = "graphics\Skins\"[END][KEY = track_record] fx_sound = 2 record_graphics_effect = 1 record_ground_vehicles = 1[END][KEY = updater] locales = "rus,eng,ger,spa,fra,pol" seed = 1 language = "eng" web_distribution = 0 enable_udp = 0 p2p_port = 6881[END] habs doch gebacken gekriegt!!!!!! der thrustmaster schaut echt fein aus!
7./SchG2_v*Athlon Posted July 3, 2017 Posted July 3, 2017 (edited) Ersetze mal den Bereich unten (mach dir eine Kopie der startup.cfg vorher) [KEY = graphics] adapter = 0 bloom_enable = 0 desktop_center = 1 detail_rt_res = 1024 fps_counter = 0 fps_limit = 60 full_height = 1080 full_width = 1920 fullscreen = 0 gamma = 1.00000 grass_distance = 100.00000 hdr_enable = 0 land_tex_lods = 3 mgpu_compatible = 0 multisampling = 1 or_enable = 0 preset = 2 ssao_enable = 0 vsync = 1 win_height = 768 win_width = 1024 [END] Edited July 3, 2017 by 7./SchG.2*SirAthlon
xxwikingxx Posted July 3, 2017 Author Posted July 3, 2017 hi. habs jetzt eingefügt bei graphics. tut sich leider immer noch nix.
7./SchG2_v*Athlon Posted July 3, 2017 Posted July 3, 2017 Martin, hast Du mal die Benutzerkontensteuerung von Windows 10 deaktiviert ? Du hast Post (PM) 1
xxwikingxx Posted July 8, 2017 Author Posted July 8, 2017 ein riesen großes DANKESCHÖN an SirAthlon!!!!!! Problem ist behoben!! die Fliegerei kann beginnen!! danke nochmals für deine Geduld und Fachkompetenz!! lg
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now