Trim settings

[Hartigan]

This thread is actually a question for devs and community. I noticed that some planes trim settings has been added to the Specification page. Like BF109, takeoff +1 and landing -4 or -5. This information helps me a lot to perform nice 3 point landing without any bounches  

But that information is not available for every planes and usually i must quess right trim settings for takeoff and final approach. Like P40 needs +95 pitch trim for takeoff 

So could you quys add all available trim settings in this thread (+- % )and it would be nice if Devs could add those in to the game in future. 

 

Thanks!

[Sketch]

Confirming that it's +96% for trim on take off for the P40. From the instructional video -> https://youtu.be/TOIg7JxHQBk?t=1129

 

This translates to about +96% on the trim tab - just as you stated. And here is an image of the T\O on the trim tab in the game. -> http://i.imgur.com/NTk8BAP.jpg

Edited November 23, 2016 by [TWB]Sketch

[LukeFF]

Sketch' timestamp='1479909640' post='412699'] This translates to about +96% on the trim tab - just as you stated. And here is an image of the T\O on the trim tab in the game. -> http://i.imgur.com/NTk8BAP.jpg

 

You have the trim tab set too far in that image. The T/O marking corresponds to the '1' marking on the dial and is set correctly when it's lined up with upper line of the white marking. In your image you have it set to '2'.

Edited November 23, 2016 by LukeFF

[saldy]

I have problem with height trimm on He 111. Not working. Plane is still heavy on the tail.  But In external view is visible movement +- 100% ... With Ju 87 no problem   .