Object Counter Question

[ZZ15_dasSofa]

Hi, we try to create a Mission and get stuck with the Object Counter. We have 6 Tanks which are set as a secondary Objectiv.

If you start the Mission first, all went good. All 6 Tanks must shoot down to make this second Objectiv.

Now lets say, we get only 4 Tanks in the Mission time. After the reload of the Map, you must only shoot 2 Tank to complet the secondary Objectiv.

How we can reset this Counter, to shoot all 6 Tanks if the Mission is reloaded ?

 

Thank for the help!

 

Regards

Bernhard

[TP_Jacko]

Can you show a picture of the logic in the editor

[ZZ15_dasSofa]

I dont have access to the Server/Mission i am just the Tester for it and have more time as he. Will post the logic picture when i get it.

[Urra]

Hi, from what you state at the very end. "Reload mission", I understand to be reloading the entire mission. If that's the case everything on the map gets reset.

[ZZ15_dasSofa]

The Map has a timelimit from 4 Hours, after that the Map reload. All destroyed Tanks are again on the Map but it seems that the Mission keep the destroyed Tanks before in Mind.

After the reload it takes just 1,2 or 4 Tanks to destroy to get the Message "Secondary target destroyed.". I can not wait 4 Hours to count the destroyed tanks before the mission reloads so maybe its just an counter error.

All Counters have the same Name, can that be the case ?

Edited June 1, 2016 by A./ZG15_dasSofa

[JimTM]

I assume that you are triggering the counter with an OnKilled event message link. You may be getting multiple OnKilled messages from certain trucks when you play the second mission. Check this post by Coconut.

Edited June 1, 2016 by JimTM

[ZZ15_dasSofa]

Thanks for the Help. It looks like the same problem as in the linked post. The Mission builder will Edit the Counter soon. I will write here, if it works.