Issue with controls

[LLv44_Mprhead]

I had really weird issue today flying bf 110. I have throttle of both engines mapped to same axle of my hotas, but for some reason they didn't increase/decrease at same rate. When having 41% on engine 2, engine one was still at emergency power, and when decreasing throttle so that engine one was at continous running area engine two was already at 0%. When I remapped and tested with quick mission, the problem disappeared for now.

[KG200_Volker]

By accident you throtle up engine 1 before no2 ignites, the sim does not accept commands before start sequence finishes. To solve this if it happens again set controls (if you dont like the default ones) for selecting engine 1 and engine 2 seperatly and "all engines".

 

E.G.

 

Uneven throtle

 

Select eng1 throttle back to 0%

Select eng2 throttle back to 0%

Select "all engines" throttle normaly , engines are in sequence.

 

Also this will help you for fethering and closing radiators on a dead engine thus reducing drag. Drag in this case might make the deference from landing at home base and ditching along the way.