Can't exceed %90 throttle

[cenkcnk]

i tried 2 different throttle input device and i cannot exceed %90 on level flight. is it a hardware problem, in game setting problem or a feature of the ww2 era planes?

[LukeFF]

Recalibrate your controllers.

[Finkeren]

What plane are you flying and which difficulty settings do you use?

[bokepacha]

Sounds like a calibration problem but you said 2 different devices and same problem?? That's weird.

[TP_Jacko]

Have you set anything ingame like dead zones

[cenkcnk]

normal difficulty, calibrated throttle (ch pro throttle)

it says %90 level flight throttle or take off throttle

[cenkcnk]

ok i found it, noise filter applied little bir and i set it to 0, its ok now

[Soarfeat]

Hey cenkcnk,

 

Just in case you have not seen this at the CH forum, Ghost did a great tutorial on calibrating the ch controllers using the ch manager.

Here is the link http://www.ch-hangar.com/forum/index.php/files/file/109-control-manager-dummies-guide/,

There is a special way to calibrate ch throttle so you get proper emergency power ( 100 % throttle )

-sf-

[-TBC-AeroAce]

just make sure if you are on normal that you are not over stressing the engine as if you do it will limit your power so you dont break your engine

[bokepacha]

I suggest you add a "[FIXED]" to the title so people can check it in the future.

[cenkcnk]

problem occured again, in ch manager it looks fully forward and i see thorttle go full in the cockpit lever, but it goes back although i don't take it back and still looks fully forward.

as if plane doesn't let me apply full throttle

[Gunsmith86]

What difficulty level do you use because if "Throttle Auto limit" is active it saves you from blowing your engine.

Edited December 5, 2015 by Gunsmith86

[cenkcnk]

i can't see such a setting. i don't play at expert settings

[Brano]

If you don't play at expert setting the game will pull your throttle down not to damage the engine.If you want to fully exploit the engine, fly on expert - with consequences