Jump to content

Elevator position issues


Recommended Posts

Posted (edited)

Does anyone else have this issue. For some reason for some planes such as the Pe-2, I16, and E7 my neutral elevator position is in a slight down position when I'm on the ground. But for the F4 it is level with the horizontal stabiliser whilst on the ground.

 

As soon as I take off in the F4 or any other aircraft the neutral position for the elevator goes in the nose down position by about 5 degrees. This is not related to the stabiliser trim (for germans), but just the elevator. 

 

I thought it was something to do with my joystick but it works perfectly fine in DCS. The raw data for the stick in the control settings shows it as dead centre in the BoS settings. 

 

I'm not sure if this patch has done something to the elevator control. Also Trimming seems to be disabled for German aircraft but on the Pe 2 it seems fine as the trim tabs move but the elevator is still angled down. 

Edited by Tyberan
Posted

The German fighters have fixed trim on all control surfaces, which is why they change position as soon as the airflow gets going. The only manual trim they have is the adjustible stabilizer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...