Graphic settings explained

[taffy2jeffmorgan]

Hi All. I have just a few questions regarding Graphic settings, having not changed the settings I would say that the following are all defaults ?

 

Can you advise with regards,   fps Limiter  = 60 [ can i safely alter this with my high end 970 card installed ? ]

 

                                                 antialasing = 4 [?]

  

                                                 gamma correction = 08 [ slider will not go any lower, I read one post which said that this would be corrected with the latest upgrade, it does not ?

 

Also what is and for what purpose is the Noise filter [ 0.15 ]  joystick setting 

 

 

Res = 1920 x 1080

 

graphic card = GTX 970 = graphics set to ultra

 

 

Cheers.

 

[Mikey]

Im kinda wondering the same thing Jeff, just upgraded from a 570 to a 970 and should i just use vsync and set to 60?

[6./ZG26_Custard]

Yes to vsync  and and if you can't change the gamma settings in the menu, change them via the startup config in the data folder. 0.70000 to 0.60000 is a good setiing IMHO

[SCG_Space_Ghost]

Im kinda wondering the same thing Jeff, just upgraded from a 570 to a 970 and should i just use vsync and set to 60?

 

If you're using an NVidia card (which you are...):

• Don't use full screen. Use window mode set to the resolution of your display.
• Don't use vsync but do set a frame limit.

 

You will actually get degraded performance using full screen/vsync in both BOS and ROF. I am not sure why this is the case.

Edited April 29, 2015 by 4./JG26_Adler

[Original_Uwe]

Do you use vsync in the Nvidia control panel?

I'll have to give windowed mode a shot.

[taffy2jeffmorgan]

If you're using an NVidia card (which you are...):

• Don't use full screen. Use window mode set to the resolution of your display.
• Don't use vsync but do set a frame limit.

 

You will actually get degraded performance using full screen/vsync in both BOS and ROF. I am not sure why this is the case.

Thanks. I use full screen and with a 970 card i get no degrading, BoS runs fine, but what limit is there with frame rate settings when using a high end card ? I suppose it's a matter of trial and error !

[taffy2jeffmorgan]

What path do I follow to find " BoS start up config so I can change my gamma settings.      Cheers.

[-TBC-AeroAce]

I upgraded a 770 to 970 and didn't get much of a performance boost, sadly its quite CPU limited

[6./ZG26_Custard]

 

 

Don't use vsync but do set a frame limit.

 

I use vsync without any issues.

.

[pilotpierre]

What path do I follow to find " BoS start up config so I can change my gamma settings.      Cheers.

From memory, BoS/data/startup.cfg and change gamma from 0.8 to either 0.7 or 0.6 and save. Try both and see what one you prefer.

[taffy2jeffmorgan]

Thanks Pierre.