Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by 1/SG2_Ganeshka

  1. new results 2.011 new results i7700k + hyperthreading + 2933 memory + ASW OFF + settings High (all maxed out) + no SS Frames: 5165 - Time: 60000ms - Avg: 86.083 - Min: 55 - Max: 91
  2. i was OC my memory ... i don't know if i do this correcte , just change value in bios from 2666 to 2933 , and everything work ))) Maybe i do something wrong ... ) I have asus z170i motherboard . new results i7700k + hyperthreading + 2933 memory + ASW OFF + settings High (all maxed out) + no SS Frames: 5064 - Time: 60000ms - Avg: 84.400 - Min: 50 - Max: 91
  3. im running at stock 2666 i think i need to learn how to oc it ) i can try
  4. with 5.1ghz and HT off, I have worst results. Middle fps was 73...in first test with my old 6700k I was OC my 1070, at this moment I do not do this.Maybe whis higher frequensy it can use more gpu... I don't know
  5. so i running test in VR mod and i have strange results ))) ASW OFF Settings High all other settings maximum and no SS i7 7700k 4.8ghz + hyperthreading Frames: 4992 - Time: 60000ms - Avg: 83.200 - Min: 46 - Max: 91 i7 7700k 5 ghz + hyperthreading Frames: 5027 - Time: 60000ms - Avg: 83.783 - Min: 48 - Max: 91 and i was test new beta 2.011 i7 7700k 5 ghz + hyperthreading Frames: 5110 - Time: 60000ms - Avg: 85.167 - Min: 51 - Max: 91
  6. i'm running my new i7 7700k on 5.1 ghz with maximum voltage 1.392 , with temperature about 65 degrees . Hyper-trading OFF using be quiet 120mm silent loop for cooling i will send my new results later with 5.1 and 7700k
  7. works better higher CPU frequency . Always use 1.0 Dynamic Res .
  8. ok ) i understand . But can you add possibility to operate all data with external controller ? I want to use an external device . because if u play in cockpit ... there is no place for mouse ))) this will be perfect , nj use some encoders and buttons ! PLEASE !!! )))) and one more , momb sight as i see it could be in standart mod like when you use x2 VR zoom on it .... when almost all of your screen is crosshair , this is more realistic i think ... for this changes , you d'ont need to change propably nothing , you have command for mouse use , just add them on the buttons ....
  9. can you create a .cfg file with 2 settings pls with this 2 settings 6GB Vram version (GTX980Ti +) [setup] texlod=8192,8 texlod=8192,8 texlod=8192,8 texlod=8192,8 texlod=16384,8 [end] 8GB Vram version (GTX1080 n 1080ti +) [setup] texlod=8192,8 texlod=8192,8 texlod=16384,8 texlod=16384,8 texlod=16384,8 [end] i do something wrong i think...
  10. Hello , I wanted to raise the topic, the bomb sight in VR ... At the moment, the implementation of bomb sightings is not very suitable for VR, I think ... I would very much like to be able to use third-party controllers to manage it. A good example in IL 2 Battle of Britain, where all the functions of the sight can be configured for buttons, turnbuckles, encoders and axes. I understand that this work is not a priority, but to take out buttons to control the ready-made functions of the bomb sight, as it seems to me does not require a huge amount Resources. Look at this should be approximately the same as in the IL2 Battle for Britain. This is the smallest that I would like to add to the gameplay of bombers. And second, this is the implementation of the management of turrets in the VR ... now with this big problems
  11. this is optimisation problem ... Ican recommend you boost your CPU to max and stable , Il2 need only Mhz ... In russian forum , the best result is i7 7700k 5.2mhz always
  • Create New...