Yassy's BMS TrackIR Profile
----------------------------------------------
v1.1
----------------------------------------------
Hardware used: TrackIR 4/5 with TrackClip Pro
----------------------------------------------
Software version: 5.3
----------------------------------------------

DESCRIPTION:
------------

Eventhough the standard profile of the TrackIR works quite well in BMS, I did not like the direct control.
It resulted in jittery view and when looking at cockpit panels I found it hard to keep the viewpoint steady.

The principle for the profile revolves around having a stable view, with a deadzone around the center forward
view, to make flying and fighting with the aircraft as smooth as possible without having to adjust view 
constantly, resulting in fighting the view AND the aircraft.

I have strived to keep the deadzone as small as to keep the view steady, but prevent a 'sticky' feeling when
trying to look around.

Furthermore I have limited the movement in the Z-Axis to prevent jittering in the viewpoints.
Instead, use the mousewheel (or zoom axis on your hotas if you have that mapped) to zoom in / out.

This profile is actually an edited version of my DCS profile.
The DCS profile works best when keeping precision mode on all the time, but I have found this not to be the case
in BMS. It makes the view a bit too slow, while without precision mode the view is very direct. YMMV.


INSTALLATION:
-------------

Unzip the .XML file into your Users\<windows username>\AppData\Roaming\NaturalPoint\TrackIR5\Profiles folder.

-Start TrackIR software.

-Set Speed to 1.5

-Set Smoothing to 40 for TIR 4 and set Smoothing to 20 for TIR 5 (recommendation by NaturalPoint)

-Set Precision Mode Smoothing to 200.0 (Camera Tab)

-Then either:

1. Select Profiles tab, select Yassy_BMS as the profile and tick the 'Exclusive' tickmark.

or

2. Select Titles tab and select Yassy_BMS for any title you want (normally only BMS).

-Enjoy!

Feedback can be dropped at captainkraak@hotmail.com or at the official Benchmark Sims forums in this thread:

http://www.benchmarksims.org/forum/showthread.php?8369-TrackIR-4-5-BMS-Profile-by-Yassy

I would love to hear from you!

Yassy