// attach ID should be in range from 100 to 110
// first number is forward - backward (bigger is forward)
// second number is height (bigger is higher)
// third number is left - right (negative is left)
// rotation values : 1st along X-longitudinal, 2nd along Y-vertical, 3rd along Z-look up-down)

[attach=100] // forward view 1.5m high above pilot's head
    position = 0,1.5,0
    rotation = 0, 0, 0
    object = "LuaScripts/WorldObjects/GoProCamera75.txt"
[end]


[attach=101 // Forward camera located on the vertical fin
    position = -3.820,0.806,0.236
    rotation = 0, 0, -10
    convex = "VO"
    object = "LuaScripts/WorldObjects/GoProCamera90.txt"
[end]


[attach=102] // Forward camera located on the horizontal fin
    position = -3.688,0.471,-1.391
    rotation = 0, 0, 0
    convex = "GO_L"
    object = "LuaScripts/WorldObjects/GoProCamera90.txt"
[end]

 
[attach=103] // Backward camera located on the engine cowling
    position = 1.354,0.586,-0.647
    rotation = 0, 150, 0
    object = "LuaScripts/WorldObjects/GoProCamera90.txt"
[end]


[attach=104] // Side camera located on wing
    position = 1.025,0.717,-3.860
    rotation = 0, 100, 0
    convex = "Krilo_Top_L_3"
    object = "LuaScripts/WorldObjects/GoProCamera90.txt"
[end]


[attach=105] // Forward camera located below the plane tail
    position = -3.768,-0.168,-0.272
    rotation = 0, 0, 0
    convex = "Fuse_3"
    object = "LuaScripts/WorldObjects/GoProCamera90.txt"
[end] 